Eclipse - Fujitsu Ten CD7200 mkII User Manual

0 (0)
Eclipse - Fujitsu Ten CD7200 mkII User Manual

E-iSERV Operation Guide

CD/USB Multi-Source Tuner with Bluetooth wireless technology

We appreciate your purchase of this CD tuner. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.

Motion Picture customization

Importing display data

Motion Picture Customize

Load the Display data in the USB memory or CD-R, which is downloaded from the E-iSERV (website), to the main unit. For details of the operation, see ‘Importing display data (DISP Data)’ in the Owner’s Manual.

The application for creating Motion Picture screens (Cutting Board) can be downloaded, allowing you to create your own original Motion Picture screens.

You can create your own file by downloading the cutting board application. You can download the ready-made files from the server.

How to download the Motion Picture files

1Download the Motion Picture from the E-iSERV website, and then write it to USB memory or CD-R.

ATTENTION

<When using a USB memory drive>

Data downloaded from the ECLIPSE website (E-iSERV) should be saved in folders on the USB memory as follows: (NOTE: in order for the system to properly recognize and load DISP data, the user must create and name their folders as shown in the diagram below).

ECLIPSE

Must be created by user

DISP

ZZZZZZZ.XXX

File extension

Motion Picture.eld

• The main unit cannot be in USB music playing mode during this procedure.

<When using a CD-R>

• The main unit can only import files located in the root directory of the CD-R.

ZZZZZZZ.XXX

File extension

Motion Picture.eld

Disc formats that may be used are as follows:

CD-ROM (MODE 1)

CD-ROM (MODE2_FORM 1)

*NOTE: CD-ROMs written in MODE2_FORM2 cannot be read.

When data is imported from a CD-R, the importing process will take a long time if a lot of data other than the import data has also been saved to the CD-R.

2Load the downloaded data from the USB memory or CD-R to the unit. For details of the operation, see 'Importing display data (DISP Data)' in the Owner's Manual.

Loading...
+ 4 hidden pages