WHEELED
TRIMMER
WT24 - 190cc SUBARU - PUSH
WT24T - 190cc SUBARU - PUSH with TILT WT24S - 190cc SUBARU - SELF-PROPELLED
PN: 77298-00
Rev. 010113
Companion to 77297-00
SN Range: C08287 to D03241
OWNER'S MANUAL
ENGLISH
ESPAÑOLFRANÇAIS
Before You Begin
DEAR ECHO BEAR CAT CUSTOMER
Thank you for purchasing a ECHO Bear Cat product. The ECHO Bear Cat line is designed, tested, and manufactured to give years of dependable performance. To keep your machine operating at peak efficiency, it is necessary to adjust it correctly and make regular inspections. The following pages will assist you in the operation and maintenance of your machine. Please read and understand this manual before operating your machine.
If you have any questions or comments about this manual, please call us toll-free at 1.888.645.4520.
If you have any questions or problems with your machine, please call or write your local authorized ECHO Bear Cat Dealer.
This document is based on information available at the time of its publication. ECHO Bear Cat is continually making improvements and developing new equipment. In doing so, we reserve the right to make changes or add improvements to our product without obligation for equipment previously sold.
PLEASE SEND US YOUR WARRANTY CARD
Awarranty card is included in your owner's kit packaged with your machine. Please take the time to fill in the information requested on the card. When you send your completed card to us, we will register your machine and start your coverage under our limited warranty or go to bearcatproducts.com/warranty/warranty-registration/.
FOR MACHINE SERVICE OR PARTS:
For service assistance, contact your nearest authorized ECHO Bear Cat dealer or the factory. For parts, contact your authorized dealer. The parts manual for your machine is available at http://bearcatproducts.com/main/support/ index_html. Your dealer will need to know the serial number of your machine to provide the most efficient service. See below for information on how to identify and record the serial number for your machine.
FOR ENGINE SERVICE OR PARTS:
For engine service or parts, contact your nearest authorized engine dealer. ECHO Bear Cat does not handle any parts, repairs or warranties for engines.
ORDERING PARTS
Only genuine ECHO Bear Cat replacement parts should be used to repair the machine. Replacement parts manufactured by others could present safety hazards, even though they may fit on this machine. Replacement parts are available from your ECHO Bear Cat dealer.
Provide the following when ordering parts:
The SERIAL NUMBER of your machine. The PART NUMBER of the part.
The PART DESCRIPTION. The QUANTITY needed.
SERIAL NUMBER LOCATION
Please record the serial number in the space provided and on the warranty and registration card.
MANUFACTURED BY CRARY INDUSTRIES |
|
|
|
|
||
WEST FARGO, NORTH DAKOTA 58078 U.S.A. |
|
SERIAL NUMBER |
||||
SERIAL NUMBER XXXXXX |
|
|
|
|
||
MANUFACTURED IN U.S.A. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HOW TO CONTACT ECHO BEAR CAT |
|
|
|||
|
|
|
|
|
|
|
ADDRESS |
PHONE |
|
HOURS |
|||
|
|
|
|
|
|
|
237 NW 12th Street |
888.645.4520 |
sales@bearcatproducts.com |
Monday - Friday, |
|||
P.O. Box 849 |
701.282.5520 |
8 am to 5 pm |
||||
service@bearcatproducts.com |
||||||
West Fargo, ND 58078 |
FAX: 701.282.9522 |
Central Time |
||||
|
|
|||||
|
|
|
|
|
|
|
*Original Instructions
© 2013, CRARY INDUSTRIES, ALL RIGHTS RESERVED. PRODUCED AND PRINTED IN THE U.S.A.
LIMITED WARRANTY
This warranty applies to all ECHO Bear Cat Outdoor Power Equipment manufactured by Crary Industries Inc.
Crary Industries warrants to the original owner each new ECHO Bear Cat product to be free from defects in material and workmanship, under normal use and service. The warranty shall extend, from date of purchase, 3 years (U.S. and Canada only (2 years outside U.S. and Canada)) for Consumer use of the product, 1 year for Commercial applications and 6 months for Rental applications.
“Consumer” defined as: complete unit for personal, residential or non-income producing use.
“Commercial” defined as: complete unit for commercial, institutional, property management, agricultural, horticultural or income producing use.
“Rental” defined as: complete unit for rental purposes to produce income.
*Models SC2170, SC2206 & SC3206 are classified as Consumer grade products and will not qualify for warranty coverage if used for Commercial or Rental purposes.
The product is warranted to the original owner as evidenced by a completed warranty registration on file at Crary Industries. Replacement parts are warranted for (90) days from date of installation.
THE WARRANTY REGISTRATION MUST BE COMPLETED AND RETURNED TO CRARY INDUSTRIES WITHIN 10 DAYS OF DELIVERY OF THE PRODUCT TO THE ORIGINAL OWNER OR THE WARRANTY WILL BE VOID.
In the event of a failure, return the product, at your cost, along with proof of purchase to the selling ECHO Bear Cat dealer. Crary Industries will, at its option, repair or replace any parts found to be defective in material or workmanship. Warranty on any repairs will not extend beyond the product warranty. Repair or attempted repair by anyone other than an authorized ECHO Bear Cat dealer as well as subsequent failure or damage that may occur as a result of that work will not be paid under this warranty. Crary Industries does not warrant replacement components not manufactured or sold by Crary Industries.
1.This warranty applies only to parts or components that are defective in material or workmanship.
2.This warranty does not cover normal wear items including, but not limited to: bearings, belts, pulleys, filters, chipper blades, shredder flails or knives.
3.This warranty does not cover normal maintenance, service or adjustments.
4.This warranty does not cover depreciation or damage due to misuse, negligence, accident or improper maintenance.
5.This warranty does not cover damage due to improper setup, installation or adjustment.
6.This warranty does not cover damage due to unauthorized modifications of the product.
7.Engines are warranted by the respective engine manufacturer and are not covered by this warranty.
Crary Industries is not liable for any property damage, personal injury or death resulting from the unauthorized modification or alteration of an ECHO Bear Cat product or from the owner’s failure to assemble, install, maintain or operate the product in accordance with the provisions of the Owner’s manual.
Crary Industries is not liable for indirect, incidental or consequential damages or injuries including but not limited to loss of crops, loss of profits, rental of substitute equipment or other commercial loss.
This warranty gives you specific legal rights. You may have other rights that may vary from area to area.
Crary Industries makes no warranties, representations or promises, expressed or implied as to the performance of its products other than those set forth in this warranty. Neither the dealer nor any other person has any authority to make any representations, warranties or promises on behalf of Crary Industries or to modify the terms or limitations of this warranty in any way. Crary Industries, at its discretion, may periodically offer limited, written enhancements to this warranty.
CRARY INDUSTRIES RESERVES THE RIGHT TO CHANGE THE DESIGN AND/OR SPECIFICATIONS OF ITS PRODUCTS AT ANY TIME WITHOUT OBLIGATION TO PREVIOUS PURCHASERS OF ITS PRODUCTS.
ENGLISH
|
TABLE OF CONTENTS |
|
DESCRIPTION |
PAGE |
|
SAFETY................................................................................................................. |
1 |
|
1.1 |
SAFETY ALERT SYMBOL...................................................................................... |
1 |
1.2 |
EMISSION INFORMATION.................................................................................... |
1 |
1.3 |
BEFORE OPERATING........................................................................................... |
2 |
1.4 |
OPERATIION SAFETY........................................................................................... |
2 |
1.5 |
MAINTENANCE AND STORAGE SAFETY............................................................ |
2 |
1.6 |
SAFETY DECAL LOCATIONS................................................................................ |
3 |
ASSEMBLY............................................................................................................ |
4 |
|
2.1 |
ADJUST THE HANDLEBAR................................................................................... |
4 |
2.2 |
ADD OIL4 |
|
2.3 |
FILL THE FUEL TANK............................................................................................ |
4 |
FEATURES & CONTROLS................................................................................... |
5 |
|
OPERATION.......................................................................................................... |
6 |
|
4.1 |
STARTING THE TRIMMER.................................................................................... |
6 |
4.2 |
STOPPING THE TRIMMER.................................................................................... |
6 |
4.3 |
TRIMMING GUIDE................................................................................................. |
6 |
4.4 |
WT24 — OFF-SET TRIMMING.............................................................................. |
7 |
4.5 |
WT24T — TILT & TRIM FEATURE......................................................................... |
7 |
4.6 |
WT24S — SELF-PROPELLED OPERATION ........................................................ |
7 |
SERVICE & MAINTENANCE................................................................................ |
8 |
|
5.1 |
MAINTENANCE SCHEDULE................................................................................. |
8 |
5.2 |
ENGINE MAINTENANCE....................................................................................... |
8 |
5.3 |
CUTTING STRING REPLACEMENT..................................................................... |
9 |
5.4 |
CUTTING HEIGHT ADJUSTMENT........................................................................ |
9 |
5.5 |
WT24S — TRANSMISSION ADJUSTMENT........................................................ |
10 |
TRIMMER BAIL ADJUSTMENT................................................................................... |
10 |
|
5.6 |
WT24 AND WT24T CUTTING HEAD DRIVE BELT REPLACEMENT.................. |
11 |
5.7 |
WT24S CUTTING HEAD DRIVE BELT REPLACEMENT.................................... |
13 |
5.8 |
WT24S — DRIVE CHAIN ADJUSTMENT............................................................ |
15 |
5.9 |
WT24S TRANSMISSION BELT REPLACEMENT................................................ |
16 |
TROUBLESHOOTING......................................................................................... |
17 |
|
SPECIFICATIONS............................................................................................... |
18 |
|
BOLT TORQUE............................................................................................................ |
19 |
|
OPTIONS............................................................................................................. |
20 |
|
1 SAFETY
Section
1.1 SAFETY ALERT SYMBOL |
|
1.2 EMISSION INFORMATION |
The Owner/Operator’s manual uses this symbol to alert you of potential hazards. Whenever you see this symbol, read and obey the safety message that follows it. Failure to obey the safety message could result in personal injury, death or property damage.
DANGER
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious injury.
WARNING
Indicates a potentially hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION
Indicates a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.
Under California
Law and the laws of
several |
other |
states, |
|
you |
are |
not |
permitted |
to |
operate an internal |
||
combustion engine using hydrocarbon fuels on any forest covered, brush covered or grass covered
land or on land covered with grain, hay or other flammable agricultural crops, without an engine spark arrester in continuous effective working order.
The engine on your power equipment, like most outdoor power equipment, is an internal combustion engine that burns gasoline or diesel fuel (hydrocarbons). Therefore, your power equipment must be equipped with a spark arrester muffler in continuous effective working order. The spark arrester must be attached to the engine exhaust system in such a manner that flames or heat from the system will not ignite flammable material.
Failure of the owner/operator of the equipment to comply with this regulation is a misdemeanor under California law and may also be a violation of other state and/or federal regulations, laws, ordinances, or codes. Contact your local fire marshal or forest service for specific information about which regulations apply in your area.
Thestandardmufflerinstalledontheengineisnotequipped with a spark arrester. One must be added before using this machine in an area where a spark arrester is required by law. Contact the local authorities if these laws apply to you. See your authorized engine dealer for spark arrester options.
ENGLISH
WHEELED TRIMMER |
1 |
SAFETY
1.3BEFORE OPERATING
1.Read and understand this owner’s manual. Be completely familiar with the controls and the proper use of this equipment.
2.Familiarize yourself with all of the safety and operating decals on this equipment and on any of its attachments or accessories.
3.Keep safety decals clean and legible. Replace missing or illegible safety decals.
4. Obtain and wear safety glasses and use hearing protection at all times when operating this machine.
5. Avoid wearing loose fitted clothing. Never operate this machine while wearing clothing with drawstrings
that could wrap around or get caught in the machine.
6.Do not operate this machine if you are under the influence of alcohol, medications, or substances that can affect your vision, balance or judgment. Do not operate if tired or ill. You must be in good health to operate this machine safely.
7.Do not operate this equipment in the vicinity of bystanders. Keep the area of operation clear of all persons, particularly small children. It is recommended that bystanders keep at least 50 feet (15 meters) away from the area of operation.
8.Do not allow children to operate this equipment.
9.Use only in daylight or good artificial light.
10.Do not run this equipment in an enclosed area. Engine exhaust contains carbon monoxide gas, a deadly poison that is odorless, colorless and tasteless. Do not operate this equipment in or near buildings, windows or air conditioners.
11.Always use an approved fuel container. Do not remove gas cap or add fuel when engine is running. Add fuel to a cool engine only.
12.Do not fill fuel tank indoors. Keep open flames, sparks, smoking materials and other sources of combustion away from fuel.
13.Do not operate machine without shields in place.
Failure to do so may cause serious injury or death.
14.Keep all guards, deflectors, and shields in good working condition.
15.Before inspecting or servicing any part of this machine, shut off the machine and make sure all moving parts have come to a complete stop. Disconnect the battery and remove the ignition key where applicable.
16.Check that all screws, nuts, bolts, and other fasteners are secured, tightened and in proper working condition before starting the machine.
1.4OPERATIION SAFETY
1.Keep hands and feet out of cutting area while machine is operating to avoid serious personal injury. Stop and allow machine to come to a complete stop before clearing obstructions.
2.Set up your work site so you are not endangering traffic and the public. Take great care to provide adequate warnings.
3.Keep the machine clear of debris and other accumulations.
4.When the trimmer bail is engaged, the trimmer disk is rotating. Do not attempt to inspect or service the machine while the trimmer disk is rotating.
5.Maintain firm control of the machine during operation to prevent tipping. Always be sure of your footing.
6.Shut off the power source, and make sure all moving parts have come to a complete stop before inspecting or servicing any part of the machine.
1.5MAINTENANCE AND STORAGE SAFETY
1.Before inspecting, servicing, storing, or changing an accessory, shut off the machine and make sure all moving parts have come to a complete stop. Disconnect the battery and remove the ignition key where applicable.
2.Replace any missing or unreadable safety decals. Refer to the safety decal section for part numbers.
3.Allow machine to cool before storing in an enclosure.
4.Store the machine out of reach of children and where fuel vapors will not reach an open flame or spark.
5.Never store this machine with fuel in the fuel tank inside a building where fumes may be ignited by an open flame or spark. Ignition sources can be hot water and space heaters, furnaces, clothes dryers, stoves, electric motors, etc.
6.Drain the fuel and dispose of it in a safe manner for storage periods of three months or more.
2 |
WHEELED TRIMMER |
SAFETY
1.6 SAFETY DECAL LOCATIONS
Familiarize yourself with all of the safety and operational decals on the machine and the associated hazards. See the engine owner’s manual or contact the engine manufacturer for engine safety instructions and decals. Make certain that all safety and operating decals on this machine are kept clean and in good condition. Decals that need replacement must be applied to their original locations.
1 |
P/N 32014-00 |
|
ENGLISH |
DO NOT OPERATE THIS EQUIPMENT IN THE VICINITY |
MAKESUREALLMOVING |
DO NOT ALLOW HANDS OR ANY PART OF BODY |
O B TA I N A N D W E A R |
||
OF BYSTANDERS. DO NOT ALLOW CHILDREN |
PARTS HAVE COME TO OR CLOTHING NEAR ANY MOVING PART TO |
S A F E T Y |
G L A S S E S |
||
TO OPERATE THIS EQUIPMENT. ALWAYS STAND |
A COMPLETE STOP. AVOID SERIOUS PERSONAL INJURY. |
A N D U S E |
H E A R I N G |
||
CLEAR OF DISCHARGE AREA WHEN OPERATING |
BEFORE INSPECTING |
|
PROTECTION AT ALL |
||
THIS MACHINE. |
ORSERVICINGANYPART |
|
TIMES WHEN OPERATING |
||
2 |
P/N 32015-00 |
OF THIS MACHINE, |
|
THIS MACHINE. |
|
|
|
|
|
||
BEFORE INSPECTING OR SERVICING ANY PART OF THIS MACHINE, SHUT OFF POWER SOURCE, DISCONNECT SPARK PLUG WIRE FROM SPARK PLUGAND MAKE SURE ALL MOVING PARTS HAVE COME TO A COMPLETE STOP.
KEEP MACHINE CLEAR OF DEBRIS AND OTHER ACCUMULATIONS. BUILD UP OF DEBRIS ON MACHINE CAN CAUSE A FIRE.
READ AND UNDERSTAND YOU OWNERS MANUAL BEFORE OPERATING. IF OWNERS MANUAL WAS NOT INCLUDED OR YOU HAVE ANY QUESTIONS, PLEASE CALL 800.247.7335 OR 701.282.5520 (U.S.A.)
1 |
2 |
WHEELED TRIMMER |
3 |
2 ASSEMBLY
Section
2.1 ADJUST THE HANDLEBAR
To adjust the handlebar into position for use, loosen the locking tee knobs on the notched handlebar retainers. Place handlebar into operating position and re-tighten knobs.
2.2 ADD OIL
Check the oil level and, if needed, fill the engine crankcase with the type and amount of oil specified in the engine owner’s manual.
2.3 FILL THE FUEL TANK
WARNING
Gasolineanddieselfuelsarehighlyflammable and their vapors are explosive. To prevent personal injury or property damage:
Store fuel only in approved containers, in well ventilated, unoccupied buildings, away from sparks or flames.Acontainer with a capacity of 2 gallons
or less with a pouring spout is recommended. Do not fill the fuel tank while the engine is hot or running, since spilled fuel could ignite if it comes in contact with hot parts or sparks from ignition. Do not start the engine near spilled fuel. Never use fuel as a cleaning agent. DO NOT MIX OIL WITH FUEL.
Use only those types of fuels that are recommended in your engine owner’s manual.
To add fuel:
1.Stop engine, wait for all parts to stop moving and disconnect spark plug wire. Remove key from key switch (if applicable). Allow the engine and muffler to cool for at least three minutes.
2.Clean area around fuel fill cap and remove cap.
3.Using a clean funnel, fill fuel tank to 1/2” below bottom of filler neck to provide space for any fuel expansion. Install fuel fill cap securely and wipe up any spilled gasoline.
4 |
WHEELED TRIMMER |
Loading...