Echo SRM - 2110 User Manual

0 (0)
Grass T rimmer/Brush Cutter
Operator's Manual
MODELS, SRM - 2100, 2110
Serial Number 001001 & Up
MODELS, Type 1E SRM - 2100, 2110
Serial Number 001001 & Up
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a
Safety Manual. Both must be read and understood for proper and safe operation.
W ARNING
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
X7702270500
X770000030
02/99
2
INTRODUCTION
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-
job-dependability. Read and understand this manual and the SAFETY MANUAL you found in the same package.
You will find both easy to use and full of helpful operating tips and SAFETY messages.
W ARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety
Manual. Both must be read and understood for proper and safe operation.
THE OPERATOR'S MANUAL
--
contains specifications and information for operation, starting,
stopping, maintenance, storage and assembly specific to this product.
THE SAFETY MANUAL
--
explains possible hazards involved with the use of Grass Trimmers
and Brush Cutters and what measures you should take to make their
use safer.
TABLE OF CONTENTS
Introduction ........................................................................ 2
- The Operator's Manual ............................................... 2
- The Safety manual ...................................................... 2
Manual Safety Symbols and Important Information.......... 3
Safety .................................................................................. 3
- General Description.................................................... 3
- Decals.......................................................................... 4
- International Symbols ................................................. 4
- Equipment ................................................................... 5
- Fuel ............................................................................. 5
- Personal Condition and Safety Equipment ................. 6
- Safe Operation............................................................. 7
- Extended Operation/Extreme Conditions .................... 8
Description ......................................................................... 9
- Contents ..................................................................... 9
- Blade Terms and Definitions ...................................... 9
- Emission Control ...................................................... 10
Specifications.................................................................... 12
Assembly.......................................................................... 13
- Plastic Shield Installation .......................................... 13
- Nylon Head Installation ........................................... 13
- Blade Installation ...................................................... 14
- Throttle Linkage and Ignition Leads ......................... 16
- Front Handle Installation .......................................... 16
- U-Handle Installation ............................................... 17
Pre-Operation ................................................................... 19
- Operation with Blades .............................................. 19
- Fuel ........................................................................... 21
- Equipment Check ..................................................... 22
- Determine Operation Area ....................................... 22
Operation.......................................................................... 23
- Starting Cold Engine .................................................. 23
- Starting Warm Engine ............................................... 24
- Stopping Engine ........................................................ 24
Maintenance ..................................................................... 25
- Skill Levels................................................................ 25
- Maintenance Intervals .............................................. 25
- Air Filter ................................................................... 26
- Fuel Filter ................................................................. 26
- Spark Plug................................................................. 27
- Cooling System Cleaning .......................................... 27
- Exhaust System ........................................................ 28
- Carburetor Adjustment Type 1E ............................ 29
- Carburetor Adjustment Type 1 ............................... 30
- Lubrication ................................................................ 31
- Nylon Line Replacement........................................... 31
- Sharpening Metal Blades........................................... 33
Troubleshooting................................................................ 34
Storage .............................................................................. 35
Servicing Information........................................................ 36
- Parts.......................................................................... 36
- ECHO Ccnsumer Product Support .......................... 36
- Service ....................................................................... 36
- Warranty Card .......................................................... 36
- Additional or Replacement Manuals ........................ 36
- Manual Ordering Instructions .................................. 36
Specifications, descriptions and illustrative material in
this literature are as accurate as known at the time of
publication, but are subject to change without notice.
Illustrations may include optional equipment and
accessories, and may not include all standard equipment.
G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERAT OR
'
S
M
ANUAL
3
FRONT
HANDLE
(LOOP SHOWN)
DRIVE SHAFT
(W/DECALS)
DEBRIS SHIELD
(W/DECALS)
CUTTING ATTACHMENT
(NYLON BLADE SHOWN)
STOP SWITCH
POWER HEAD
(W/DECALS)
IMPORTANT The enclosed message
provides information necessary for the
protection of the unit.
NOTE This enclosed message provides tips for
use, care and maintenance of the unit.
MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION
Throughout this manual and on the product itself, you will find safety
alerts and helpful, information messages preceded by symbols or key
words. The following is an explanation of those symbols and key
words and what they mean to you.
This symbol accompanied by the words WARNING and
DANGER calls attention to an act or condition that can lead
to serious personal injury to operator and bystanders.
The circle with the slash symbol means whatever is shown
within the circle is prohibited.
SAFETY
GENERAL DESCRIPTION
IMPORTANT
See Description and Specification sections for full description and illustration of model variation in power head,
handle type, harness and debris shield/cutting attachment.
THROTTLE TRIGGER
4
SHAFT DECAL
WARNING DANGER
This unit can be dangerous and cause serious injury if improperly
used. To reduce injury risk to operator, helpers and bystanders, read
and understand the Operator's and Safety manuals.
Blindness can occur from objects that are thrown or ricocheted even
with shield in place. Operators, helpers and bystanders must wear
ANSI Z87.1 approved eye protection.
Always wear hearing protection when operating unit.
Prevent accidental contact with unit and any cutting attachment.
Maintain a 50 ft. (15M) radius, DANGER ZONE surrounding the
operator. ONLY the operator, dressed in proper protective clothing
should be in the DANGER ZONE.
Beware of KICKOUT (blade thrust) when using blades. Special
precautions are necessary for blade operation, see your Operator's
and Safety Manuals. ONLY install ECHO approved blades on
Brush Cutters (SRM) models equipped with proper blade shield,
U-handles, harness, blade collar, nut and cotter pin.
Blade/Cutting attachment does not stop immediately after releasing
throttle. Keep hands and feet clear of blade/cutting attachment
unless engine is shut off and cutting attachment is not moving.
INSPECT BLADES BEFORE USE.
DO NOT USE DAMAGED, CRACKED, BENT, DULL OR
IMPROPERLY SHARPENED BLADES.
Do not remove shields, modify the unit or install attachments or
parts not approved by ECHO. Approved attachment information
and replacement Operator's and Safety Manuals are available from
your ECHO dealer or by writing: ECHO, INCORPORATED,
400 OAKWOOD RD., LAKE ZURICH, IL 60047.
DEBRIS SHIELD DECAL
4
Metal Debris
Shield
Plastic Debris
Shield
DECALS
Locate these safety decals on your unit. The complete unit illustration,
found in the "DESCRIPTION" section, will help you locate them.
Make sure the decals are legible and that you understand and follow
the instructions on them. If a decal cannot be read, a new one can be
ordered from your ECHO dealer. See PARTS ORDERING instruc-
tions for specific information.
Symbol
description/application
Symbol form/shape
Symbol
description/application
Symbol form/shape
Hot
Surface
Carburetor adjustment
- Idle speed
Carburetor adjustment
- High speed mixture
Primer bulb
INTERNA TIONAL SYMBOLS
Symbol
description/application
Symbol form/shape
Symbol
description/application
Symbol form/shape
"WARNING, SEE
OPERATOR'S
MANUAL
Wear eyes, ears and
head protection
Emergency stop
Fuel and oil mixture
Finger Severing
Carburetor adjustment
- Low speed mixture
Ignition
I
O
ON OFF
Ignition
ON/OFF
G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERAT OR
'
S
M
ANUAL
5
EQUIPMENT
Before operation a complete check of the unit must be performed;
Check unit for loose/missing nuts, bolts and screws. Tighten and/or
replace as needed.
Inspect fuel lines, tank and area around carburetor for fuel leaks.
DO NOT operate unit if leaks are found.
Inspect shield for damage and ensure that the cut-off knife is
securely in place. Replace if either is damaged or missing.
Check that the cutting attachment is firmly attached and in safe
operating condition.
Check that front (loop) handle and shoulder strap/ or shoulder/waist
harness are adjusted for safe, comfortable operation. See Assembly
Section on page 16 for proper adjustment.
3 M
(10 FT.) MINIMUM
FUEL
WARNING DANGER
Fuel is VERY flammable. Use extreme care when mixing, storing
or handling, or serious personal injury may result
Use an approved fuel container.
DO NOT smoke near fuel.
DO NOT allow flames or sparks near fuel.
Fuel tanks/cans may be under pressure. Always loosen fuel caps
slowly allowing pressure to equalize.
NEVER refuel a unit when the engine is HOT!
NEVER refuel a unit with the engine running.
DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks
outdoors over bare ground.
Securely tighten fuel cap after refueling.
Inspect for fuel leakage. If fuel leakage is found, do not start or
operate unit until leakage is repaired.
After Refueling;
Wipe any spilled fuel from the unit.
Move at least 3 m (10 ft.) from refueling location before starting.
After Use;
DO NOT store a unit with fuel in its tank. Leaks can occur. Return
unused fuel to an approved fuel storage container.
6
PERSONAL CONDITION AND SAFETY EQUIPMENT
WARNING DANGER
Trimmer/Brush Cutter users risk injury to themselves and others if the trimmer/brush cutter is used improperly
and or safety precautions are not followed. Proper clothing and safety gear must be worn when operating a
trimmer.
Physical Condition --
Your judgment and physical dexterity may not be good:
- if you are tired or sick,
- if you are taking medication,
- if you have taken alcohol or drugs.
Operate unit only if you are physically and mentally well.
Eye Protection --
Wear eye protection that meets ANSI Z87.1 or CE requirements
whenever you operate the trimmer.
Hand Protection --
Wear no-slip, heavy duty work gloves to improve your grip on the
Trimmer/Brush Cutter handles. Gloves also reduce the transmission
of machine vibration to your hands.
Hearing Protection --
ECHO recommends wearing hearing protection whenever unit is used.
Proper Clothing --
Wear snug fitting, durable clothing;
- Pants should have long legs, shirts with long sleeves.
- DO NOT WEAR SHORTS,
- DO NOT WEAR TIES, SCARVES, JEWELRY.
Wear sturdy work shoes with non-skid soles;
- DO NOT WEAR OPEN TOED SHOES,
- DO NOT OPERATE UNIT BAREFOOTED.
Hot Humid Weather --
Heavy protective clothing can increase operator fatigue which may
lead to heat stroke. Schedule heavy work for early morning or late
afternoon hours when temperatures are cooler.
G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERAT OR
'
S
M
ANUAL
7
15M
(50 ft.)
SAFE OPERATION
Determine Operation Area
- Provide all operators of this equipment with the operator's manual
and instructions for safe operation.
- Review the area to be trimmed. Look for hazards that could
contribute to unsafe conditions.
- Spectators and fellow workers must be warned, and children and
animals prevented from coming nearer than 15M (50 ft.) while
the trimmer is in use.
Operation
Use Proper Clothing & Equipment
- Before starting the unit, equip yourself and any other person
working within the 15M (50 ft.) Safety Zone with the required
Protective Equipment and clothing.
Avoid Hot Surfaces
- During operation, the complete unit, especially the drive shaft
housing and the bearing housing may become very hot, too hot to
touch. Avoid contact during and immediately after operation.
Keep A Firm Grip
- Hold the front and rear handles with both hands with thumbs and
fingers encircling the handles
Keep A Solid Stance
- Maintain footing and balance at all times. Do not stand on slippery,
uneven or unstable surfaces. Do not work in odd positions or on
ladders. Do not over reach.
8
Vibration and Cold --
It is believed that a condition called Raynaud’s Phenomenon, which
affects the fingers of certain individuals may be brought about by
exposure to vibration and cold. Exposure to vibration and cold may
cause tingling and burning sensations followed by loss of color and
numbness in the fingers. The following precautions are strongly
recommended because the minimum exposure which might trigger the
ailment is unknown.
Keep your body warm, especially the head, neck, feet, ankles,
hands and wrists.
Maintain good blood circulation by performing vigorous arm
exercises during frequent work breaks and also by not smoking.
Limit the hours of operation. Try to fill each day with jobs where
operating the trimmer or other hand-held power equipment is not
required.
If you experience discomfort, redness and swelling of the fingers
followed by whitening and loss of feeling, consult your physician
before further exposing yourself to cold and vibration.
Repetitive Stress Injuries --
It is believed that overusing the muscles and tendons of the fingers,
hands, arms and shoulders may cause soreness, swelling, numbness,
weakness and extreme pain in those areas. Certain repetitive hand
activities may put you at a high risk for developing a Repetitive Stress
Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome
(CTS), which could occur when your wrist swells and squeezes a vital
nerve that runs through the area. Some believe that prolonged
exposure to vibration may contribute to CTS. CTS can cause severe
pain for months or even years. To reduce the risk of RSI/CTS, do the
following:
Avoid using your wrist in a bent, extended or twisted position.
Instead try to maintain a straight wrist position. Also, when grasp-
ing, use your whole hand, not just the thumb and index finger.
Take periodic breaks to minimize repetition and rest your hands.
Reduce the speed and force with which you do the repetitive
movement.
Do exercises to strengthen the hand and arm muscles.
Immediately stop using all power equipment and consult a doctor if
you feel tingling, numbness or pain in the fingers, hands, wrists or
arms. The sooner RSI/CTS is diagnosed, the more likely permanent
nerve and muscle damage can be prevented.
EXTENDED OPERATION/EXTREME CONDITIONS
G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERAT OR
'
S
M
ANUAL
9
Contents List
Items
1 - Power Head
1 - Drive Shaft Assembly
1 - Plastic Bag (co-pack)
- 1, Operator's Manual
- 1, Safety Manual
- 1, Warranty Registration Card
- 1, Limited Warranty Statement
- 1, Plastic shield
- 1, Tool Bag
--1, 8mm x 10mm wrench
--1, scrench
--1, locking tool
- 1, Nylon Trimmer Head
- 1, Safety Glasses
- 1, 2-Stroke Oil Sample, 2.6 oz.
- 1, Shoulder Harness w/hip pad
- 1, Shoulder Harness w/o hip pad
- 1, Plastic Bag
--1, shield plate
--3, 5mm x 15mm screws (shield mtg.)
- 1, Plastic Bag (for blade use only)
--1, metal shield
--1, shield bracket
--1, plastic bag
---1, 8mm x 55mm screw (handle mgt.)
---1, washer, circular
---2, cable clips
- 1, Plastic Bag
-- 3, 5mm x 15mm screws (shield mount)
-- 2, 5mm x 8mm screws (bracket to shield)
-- 4, 5mm nuts
-- 4, 5mm lockwashers
- - 1, harness clamp
MODELS
2110
2110 1E
2100
2100 1E
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
Ö
DESCRIPTION
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions,
shield installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
CONTENTS
BLADE
TERMS & DEFINITIONS --
Blade Convertible
Model (SRM-2100) can be converted to utilize blades. Plastic/nylon blades require a, "Blade Conversion Kit", which
includes a shoulder harness, and steel shield with necessary attaching hardware. Steel/metal blades also require the,
"Blade Conversion Kit", plus a "U-Handle Kit", or a Combo Kit, must be installed.
Dedicated Blade Capable
Model (SRM-2110) include both the "Blade Conversion Kit", and "U-Handle Kit".
IMPORT ANT This spark ignition system complies with Canadian ICES-002.
10
1
SAFETY
VIDEO
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
26
EMISSION CONTROL --
The emission control system for this engine is EM (Engine
Modification).
Emission Control Label located on Engine
(EXAMPLE ONLY, information on label varies by
FAMILY).
5
21
22
23
24
25
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY : TEH021UB24RA
DISPLACEMENT : 21.2cc
THIS ENGINE MEETS U.S. EPA PHI AND 1995 -
1999 CALIFORNIA EMISSION REGULATIONS
FOR ULGE ENGINES. REFER TO OWNER’S
MANUAL FOR MAINTENANCE SPECIFICATIONS
AND ADJUSTMENTS.
G
RASS
T
RIMMER
/B
RUSH
C
UTTER
O
PERAT OR
'
S
M
ANUAL
11
1. OPERATOR'S MANUAL - Included in plastic bag (co-pack). Read before operation and keep in a safe place for future
reference, i.e., operation, maintenance, storage and specifications.
2. SAFETY MANUAL - Included in plastic bag (co-pack). Read before operation and keep in a safe place for future
reference to learn proper, safe operating techniques.
3. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter.
4. GRIP - Rear (right hand) handle.
5. STOP SWITCH - "SLIDE SWITCH" mounted on top of the Throttle Trigger Housing. Move switch FORWARD
to RUN, BACK to STOP.
6. FRONT HANDLE - The front handle is factory assembled to the Drive Shaft assembly (some models) but must be
re-positioned for proper cutting attitude and operator comfort.
7. DRIVE SHAFT ASSEMBLY - Includes the Rear (right hand) Handle assembly, Gear Housing assembly, Front,
(left hand) Handle assembly, Flexible Drive Cable and Safety Decal.
8. NYLON CUTTING ATTACHMENT - Contains replaceable nylon trimming line that advances when the trimmer
head is tapped against the ground while the head is turning at normal operating speed.
9. CUT-OFF KNIFE - Automatically trims line to the correct length: 5" - after head is tapped on the ground. If trimmer is
operated without a cut-off knife the line will become too long, the engine will overheat and engine damage may occur.
10. PLASTIC DEBRIS SHIELD ASSEMBLY - Included in plastic bag (co-pack). MUST be installed on unit before use,
see Assembly Instructions. Shield assembly includes the Cut-Off Knife and Safety Decal. Mounts on the Gear
Housing Assembly just above the cutting attachment. Helps protect the operator by deflecting debris produced
during the trimming operation. This shield must be replaced with the steel shield for blade use.
11.THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger
gradually for best operating technique.
12.ARM REST - Provides arm rest during operation and protects arm from the hot engine.
13.SPARK PLUG - Provides spark to ignite fuel mixture.
14.MUFFLER/SPARK ARRESTOR - The muffler controls the exhaust noise while the spark arrestor prevents hot,
glowing particles of carbon from leaving the muffler where they could possibly start a fire. Built in accordance with
SAEJ335, this product is approved for use on U.S. Forest Land and within the states of California, Maine, Oregon
and Washington if the spark arresting screen is in place and in good repair.
15.FUEL TANK - Contains fuel and fuel filter.
16.RECOIL STARTER HANDLE - Pull recoil handle slowly until starter engages, then quickly and firmly. When
engine starts, return handle slowly. DO NOT let handle snap back or damage to unit will occur.
17.FUEL TANK CAP - Covers and seals fuel tank opening.
18.PRIMER BULB - Before starting and after filling the fuel tank, pump primer bulb 10 times or until a steady
stream of fresh fuel, without air, is visible through the "clear" fuel return line.
19.AIR CLEANER - Contains replaceable filter element.
20.CHOKE - The choke control lever is located on the top of the air filter case. Move lever to "COLD START" to
close choke for cold starting. Move lever to "RUN" position to open choke.
21.HIP PAD - (SRM-2110) Used to protect hip/leg and clothing when using U-handle equipped unit.
22.SHOULDER HARNESS- Optional SRM-2100, Standard on SRM-2110. An adjustable strap that suspends the
unit from the operator. Using the strap reduces operator fatigue.
23.METAL BLADE SHIELD - (SRM-2110) Required when unit is equipped with blades. Do not operate unit without
shield.
24.BLADE - Circular blade for grass, weed or brush cutting applications. Harness, metal shield and U-handles are
required for blade operation.
25.U-HANDLE - (SRM-2110) Required for metal blade operation.
26.SAFETY VIDEO (Not included with unit) - 99922202540 English version only) is available at a cost of $5.00
from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precautions and proper operating
techniques and is supplemental to the Safety Manual. Read and understand the Safety Manual for complete infor-
mation on safe operation.
Loading...
+ 25 hidden pages