Hedge Clipper
Operator's Manual
MODEL HC-150
Serial Number 07001001 - 07999999
WARNING DANGER
Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation.
X7532242401 |
X753000941 |
10/03 |
2
INTRODUCTION
Welcome to the ECHO family. This ECHO product was designed and manufactured to provide long life and on-the-job dependability. Read and understand this manual. You will find it easy to use and full of helpful operating tips and SAFETY messages.
THE OPERATOR’S MANUAL
Read and understand this manual before operation. Keep it in a safe place for future reference. It contains specifications and information for operation, starting, stopping, maintenance, storage, and assembly specific to this product.
THE SAFETY MANUAL
Read and understand this manual before operation. Keep it in a safe place for future reference. It explains possible hazards involved with the use of this product and what measures you should take to make their use safer.
TABLE OF CONTENTS
Introduction ............................................................... |
2 |
|
- |
The Operator's Manual ....................................... |
2 |
- |
The Safety Manual ............................................. |
2 |
Manual Safety Symbols and Important Information ..... |
3 |
|
Safety ......................................................................... |
3 |
|
- |
Decals ................................................................. |
3 |
- |
International Symbols ........................................ |
4 |
Safety Instructions .................................................... |
4 |
|
- Personal Conditions and Safety Equipment ....... |
4 |
|
- |
Extended Operation/Extreme Conditions ............ |
5 |
- |
Equipment ........................................................... |
5 |
- |
Safe Operation .................................................... |
6 |
Emissions Control ...................................................... |
6 |
|
Description ................................................................ |
7 |
|
- |
Contents ............................................................. |
7 |
Specifications ............................................................ |
9 |
|
Assembly ................................................................. |
10 |
|
- |
Install Blade Stiffener ....................................... |
10 |
- |
Remove Blade Stiffener .................................... |
10 |
Pre-Operation ........................................................... |
11 |
|
- |
Fuel ................................................................... |
11 |
Operation ................................................................. |
12 |
|
- |
Starting Cold Engine ......................................... |
12 |
- |
Starting Warm Engine ...................................... |
13 |
Copyright© 2003 By Echo, Incorporated |
|
|
All Rights Reserved. |
|
- |
Stopping Engine ............................................... |
13 |
- |
Hedge Trimming ............................................... |
14 |
Maintenance ............................................................ |
14 |
|
- |
Skill Levels ........................................................ |
14 |
- |
Maintenance Intervals ...................................... |
15 |
- |
Air Filter ........................................................... |
16 |
- |
Fuel Filter .......................................................... |
16 |
- |
Spark Plug ........................................................ |
17 |
- |
Cooling System ................................................ |
17 |
- |
Exhaust System ................................................ |
18 |
- |
Carburetor Adjustment ..................................... |
19 |
- |
Lubrication ....................................................... |
20 |
- |
Sharpening Blades ............................................ |
21 |
Troubleshooting ...................................................... |
22 |
|
Storage ..................................................................... |
23 |
|
Servicing Information .............................................. |
24 |
|
- |
Parts .................................................................. |
24 |
- |
Service .............................................................. |
24 |
- ECHO Consumer Product Support ................... |
24 |
|
- |
Warranty Card .................................................. |
24 |
- Additional or Replacement Manuals ................ |
24 |
Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories, and may not include all standard equipment.
HEDGE CLIPPER |
3 |
OPERATOR'S MANUAL |
MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION
Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.
This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystanders.
The circle with the slash symbol means whatever is shown within the circle is prohibited.
IMPORTANT
The enclosed message provides information necessary for the protection of the unit.
NOTE
This enclosed message provides tips for use, care and maintenance of the unit.
SAFETY
Hot Decal (near muffler)
DECALS
Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.
Right Front Handle Guard |
P/N 89016006361 |
P/N X505000270
P/N X505000290
4
INTERNATIONAL SYMBOLS
Symbol form/shape |
Symbol |
Symbol form/shape |
Symbol |
description/application |
description/application |
||
|
|
|
|
|
Read and understand |
|
Fuel and oil mixture |
|
owners manual. |
|
|
|
|
|
|
|
Wear eyes, ears and |
|
Finger Severing |
|
head protection |
|
|
|
|
|
|
|
|
|
Hot |
|
Emergency stop |
|
Surface |
|
|
|
|
|
|
|
|
|
Wear hand protec- |
|
DO NOT smoke |
|
|
near fuel. |
|
|
tion. Use two handed. |
|
|
|
|
|
|
|
Choke Control |
Ignition |
Ignition |
|
"Cold Start" |
|
|
|
|
ON/OFF |
|
|
Position |
|
|
|
(Choke Closed) |
|
|
|
|
|
|
|
Choke Control |
|
|
|
"Run" |
|
Do not operate |
|
Position |
|
without guards |
|
(Choke Open) |
|
in place. |
|
|
|
|
|
|
|
|
Symbol form/shape |
Symbol |
Symbol form/shape |
Symbol |
||
description/application |
description/application |
||||
|
|
|
|
|
|
|
|
|
Carburetor adjustment |
|
Carburetor adjustment |
|
|
|
- Low speed mixture |
|
- High speed mixture |
|
|
|
|
|
|
|
|
|
Safety/Alert |
|
Carburetor adjustment |
|
|
|
|
|
- Idle speed |
|
|
|
|
|
|
|
|
|
Avoid all power |
|
Do not operate clos- |
|
|
|
lines. This unit is not |
|
er than 15 M (50 ft.) |
|
|
|
insulated against |
|
from electrical haz- |
|
|
|
electrical current. |
|
ards. |
|
|
|
|
|
|
|
|
|
Plan retreat path |
|
Primer bulb |
|
|
|
|
|
|
|
|
|
from falling |
|
|
|
|
|
objects. |
|
|
|
|
|
|
|
|
|
|
|
DO NOT allow |
|
Wear slip resistant |
|
|
|
|
||
|
|
|
|
||
|
|
|
flames or sparks |
|
foot wear. |
|
|
|
near fuel. |
|
|
|
|
|
|
|
|
|
|
|
|
Keep bystanders at least |
|
|
|
|
|
4.5 meters (15 feet) away. |
|
|
|
|
|
|
|
SAFETY INSTRUCTIONS
PERSONAL CONDITION AND SAFETY EQUIPMENT
WARNING DANGER
Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit.
Physical Condition
Your judgment and physical dexterity may not be good:
•if you are tired or sick,
•if you are taking medication,
•if you have taken alcohol or drugs.
Operate unit only if you are physically and mentally well.
Eye Protection
Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the unit.
Proper Clothing
Wear snug fitting, durable clothing;
•Pants should have long legs, shirts with long sleeves.
•DO NOT WEAR SHORTS,
•DO NOT WEAR TIES, SCARVES, and JEWELRY. Wear sturdy work shoes with nonskid soles:
•DO NOT WEAR OPEN TOED SHOES,
•DONOTOPERATEUNITBAREFOOTED.
Keep long hair away from engine and blower intake. Retain hair with cap or net.
Hand Protection
Wear no-slip, heavy-duty work gloves to improve your grip on the handle. Gloves also reduce the transmission of machine vibration to your hands.
Hearing Protection
ECHO recommends wearing hearing protection whenever unit is used.
Hot Humid Weather
Heavy protective clothing can increase operator fatigue, which may lead to heat stroke. Schedule heavy work for early morning or late afternoon hours when temperatures are cooler.
HEDGE CLIPPER |
5 |
OPERATOR'S MANUAL |
EXTENDED OPERATION/EXTREME CONDITIONS
Vibration and Cold
It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals, may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations, followed by loss of color and numbness in the fingers. The following precautions are strongly recommended, because the minimum exposure, which might trigger the ailment, is unknown.
•Keep your body warm, especially the head, neck, feet, ankles, hands, and wrists.
•Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks, and also by not smoking.
•Limit the hours of operation. Try to fill each day with jobs where operating the unit or other hand-held power equipment is not required.
•If you experience discomfort, redness, and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration.
Repetitive Stress Injuries
It is believed that overusing the muscles and tendons of the fingers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.
To reduce the risk of RSI/CTS, do the following:
•Avoid using your wrist in a bent, extended, or twisted position. Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger.
•Take periodic breaks to minimize repetition and rest your hands.
•Reduce the speed and force with which you do the repetitive movement.
•Do exercise to strengthen the hand and arm muscles.
•Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner RSI/ CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented.
EQUIPMENT
WARNING DANGER
Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments, or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.
•Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.
•Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.
•Inspect hand guard for damage. Replace if damaged or missing.
•Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used.
6
SAFE OPERATION
WARNING DANGER
Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.
Read the Manuals
•Provide all users of this equipment with the Operator’s Manual and Safety Manual for instructions on Safe Operation.
Clear the Work Area
•Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 15 m (50 ft.) while the unit is in use.
Keep a Firm Grip
•Hold the front and rear handles with both hands, with thumbs and fingers encircling the handles.
Keep a Solid Stance
•Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.
Avoid Hot Surfaces
•Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.
WARNING DANGER
Never perform blade maintenance procedures while engine is running.
EMISSION CONTROL
EPA Phase 2
The emission control system for this engine is EM (Engine Modification).
Emission Control Label (located on Engine) (EXAMPLE ONLY, information on label varies by FAMILY).
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 4EHXS.0214ED DISPLACEMENT: 21.2 CC
EMISSION COMPLIANCE PERIOD : 300 HRS.
THIS ENGINE MEETS U.S. EPA PHA 2 EMISSION REGULATIONS FOR SMALL NON ROAD ENGINE. REFER TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.
PRODUCT EMISSION DURABILITY
The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.
HEDGE CLIPPER |
7 |
OPERATOR'S MANUAL |
DESCRIPTION
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.
CONTENTS
__ 1 - Hedge Clipper Assembly
__ 1 - |
Operator’s Manual |
__ 1 - |
Safety Manual |
__ 1 - |
Warranty Statement |
__ 1 - Warranty Registration Card |
|
__ 1 - |
T-Wrench 13 x 19 |
__ 1 - |
Blade Stiffener |
__ 4 - |
Blade Locknuts |
__ 4 - |
Stiffener Washers |
__ 1 - |
Echo Power Blend TM 2-stroke oil sample |
__ 1 - |
Blade Cover |
1
17 |
2 |
|
3 |
|
15 |
14 |
4 |
|
13 |
|
|
12 |
|
|
|
7 |
|
11 |
8 |
|
9 |
||
|
||
|
10 |
5
6
16
8
1.FRONT HANDLE / GUARD - Comfortable, textured finish provides anti-slip grip for front hand. Guard protects hand from the blades. Warning decals are located on guard.
2.BLADES - Double reciprocating blades mounted to a blade support bar. The blades are double sided, capable of cutting on either side.
3.BLADE STIFFENER - Attaches to top of blades and guides material being cut into blades.
4.SPARK PLUG - Provides spark to ignite fuel mixture.
5.CHOKE - The choke control lever is located on the front of the air cleaner case. Move choke lever to "COLD START" () to close the choke for Cold Starting. Move choke lever to "RUN" () position to open choke.
6.PRIMER BULB - Pumping primer bulb before starting engine draws fresh fuel from the fuel tank priming the carburetor for starting. Pump primer bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.
7.AIR CLEANER - Contains replaceable filter element.
8.RECOIL STARTER HANDLE - Pull handle slowly until recoil starter engages, then quickly and firmly. DO NOT pull rope all the way out or allow the handle to snap back, damage to the starter will occur.
9.FUEL TANK - Contains fuel and fuel filter.
10.FUEL TANK CAP - Covers and seals fuel tank opening.
11.REAR HANDLE - Contains Stop Switch, Throttle Lockout and Throttle Trigger.
12.THROTTLE TRIGGER LOCKOUT - This lever must be depressed before Throttle Trigger can be activated.
13.THROTTLE TRIGGER - Spring loaded to return to idle when released. Trigger Lockout must be depressed fully before Throttle Trigger will move. During acceleration, depress gradually for best operating technique.
14.STOP SWITCH - "TOGGLE SWITCH" located on the left side of the rear handle. Move switch UP to RUN, DOWN to STOP.
15.SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER -The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.
16.BLADE COVER - Used to cover blades during transportation or storage. Remove blade cover before using unit.
17.SAFETY VIDEO - (Not included with unit) P/N 99922202800 English version only is available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precautions and proper operating techniques and is supplemental to the Safety Manual. Read and understand the Safety Manual for complete information on safe operation.