Echo GT-2000EZR User Manual

0 (0)

Grass Trimmer

Operator's Manual

MODEL GT-2000EZR

Serial Number 03001001 - 03999999

WARNING DANGER

Read rules for safe operation and instructions carefully. ECHO provides an Operator's Manual and a Safety Manual. Both must be read and understood for proper and safe operation.

X7702273900

X770000370

01/02

 

Echo GT-2000EZR User Manual

GRASS TRIMMER

3

OPERATOR'S MANUAL

MANUAL SAFETY SYMBOLS AND IMPORTANT INFORMATION

Throughout this manual and on the product itself, you will find safety alerts and helpful, information messages preceded by symbols or key words. The following is an explanation of those symbols and key words and what they mean to you.

This symbol accompanied by the words WARNING and DANGER calls attention to an act or condition that can lead to serious personal injury to operator and bystanders.

The circle with the slash symbol means whatever is shown within the circle is prohibited.

IMPORTANT The enclosed message provides information necessary for the protection of the unit.

NOTE This enclosed message provides tips for use, care and maintenance of the unit.

SAFETY

DECALS

Locate these safety decals on your unit. The complete unit illustration found in the "DESCRIPTION" section, will help you locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer. See PARTS ORDERING instructions for specific information.

P/N 89031744530

WARNING DANGER

•This unit can be dangerous and cause serious injury if improperly used. • Operators, helpers and bystanders can be severely in jured by thrown objects and must wear specified ANSI Z87.1 eye protection. Blindness or loss of eye can occur. Do not rely on cutter head shield to protect eyes. Ricochet can occur. •to avoid accidental contact, keep everyone beyond operating area.

•To reduce the risk of injury to operator, helpers & bystanders, read and understand your operator's and safety manuals. For a free copy of the safety Manual, write to ECHO, INCORPORATED, 400 Oakwood Road, Lake Zurich, IL 60047. •Keep shield and other components in place and in good condition. Do not use attachments or other parts not approved by ECHO. GT style (non-blade capable) units must not be converted to blade use except Maxi-Cuts or similar ECHO approved attachments.

B.SPANISHDECAL

C.SHIELDDECAL

ADVERTENCIA PELIGRO

Esta unidad puede ser peligrosa y producir lesiones personales graves si no se usa en forma adecuada. Para reducir el riesgo de lesionarse, los operadores, los ayudantes y los espectadores deben leer y comprender el

890228-09560 Manual Del Operador y los Manuales De Seguridad que se entregan escritos en español.

ENGLISHTRANSLATION

WARNING DANGER

This unit can be dangerous and cause serious injury if improperly used. To reduce injury risk to operator, helpers and bystanders, read and understand the Operator's and Safety Manuals, which are provided in Spanish.

4

INTERNATIONAL SYMBOLS

 

SYMBOL FORM/

SYMBOL

SYMBOL FORM/

SYMBOL

 

 

SHAPE

DESCRIPTION/APPLICATION

SHAPE

DESCRIPTION/APPLICATION

 

 

 

Read and understand

 

FUEL AND OIL

 

 

 

Operator's Manual.

 

MIXTURE

 

 

 

 

 

 

 

 

 

WEAR EYES, EARS

 

FINGER SEVERING

 

 

 

AND HEAD

 

 

 

 

PROTECTION

 

 

 

 

 

 

 

 

 

 

 

HOT

 

WEAR SLIP

 

 

 

 

RESISTANT

 

 

 

SURFACE

 

 

 

 

 

FOOT WEAR.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WEAR HAND AND

 

DO NOT SMOKE

 

 

 

 

NEAR FUEL.

 

 

 

FOOT PROTECTION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SAFETY/ALERT

 

 

 

 

 

 

 

 

 

KEEP BYSTANDERS AND HELPERS

AWAY 15 M (50 FT.).

SYMBOL FORM/

SYMBOL

SYMBOL FORM/

SYMBOL

DESCRIPTION/APPLICATION

SHAPE

SHAPE

DESCRIPTION/APPLICATION

 

 

DO NOT ALLOW

 

 

FLAMES OR

EMERGENCY STOP

 

SPARKS NEAR

 

 

 

FUEL.

 

 

 

 

 

ENGINE CHOKE

IGNITION

 

CONTROL.

ON/OFF

 

 

 

 

PRIMER

CARBURETOR

 

BULB

ADJUSTMENT

 

- HIGH SPEED

 

 

 

 

MIXTURE

 

 

 

 

DO NOT EXCEED

CARBURETOR

 

ADJUSTMENT

 

10,000 RPM.

 

- LOW SPEED

 

 

 

 

MIXTURE

 

 

 

 

DO NOT OPERATE

 

 

WITHOUT

CARBURETOR

 

GUARDS AND

ADJUSTMENT

 

SHIELDS IN

- IDLE SPEED

 

PLACE.

 

 

 

 

 

 

BEWARE

 

DO NOT USE

- THROWN,

 

RICOCHET

 

BLADES. STRING

OBJECTS

 

LINE ONLY

 

 

SAFETY INSTRUCTIONS

PERSONAL CONDITION AND SAFETY EQUIPMENT

WARNING DANGER

Trimmer/Brush Cutter users risk injury to themselves and others if the trimmer/brush cutter is used improperly and or safety precautions are not followed. Proper clothing and safety gear must be worn when operating a trimmer.

Eye Protection

Wear eye protection that meets ANSI Z87.1 or CE requirements whenever you operate the trimmer.

Hand Protection

Wear no-slip, heavy duty work gloves to improve your grip on the Trimmer/Brush Cutter handles. Gloves also reduce the transmission of machine vibration to your hands.

Proper Clothing

Wear snug fitting, durable clothing;

Pants should have long legs, shirts with long sleeves.

DO NOT WEAR SHORTS,

DONOTWEARTIES,SCARVES,JEWELRY.

Wear sturdy work shoes with non-skid soles;

DO NOT WEAR OPEN TOED SHOES,

DONOTOPERATEUNITBAREFOOTED.

Hearing Protection

ECHO recommends wearing hearing protection whenever unit is used.

GRASS TRIMMER

5

OPERATOR'S MANUAL

EXTENDED OPERATION/EXTREME CONDITIONS

Vibration and Cold --

It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of certain individuals may be brought about by exposure to vibration and cold. Exposure to vibration and cold may cause tingling and burning sensations followed by loss of color and numbness in the fingers. The following precautions are strongly recommended because the minimum exposure which might trigger the ailment is unknown.

Keep your body warm, especially the head, neck, feet, ankles, hands and wrists.

Maintain good blood circulation by performing vigorous arm exercises during frequent work breaks and also by not smoking.

Limit the hours of operation. Try to fill each day with jobs where operating the trimmer or other hand-held power equipment is not required.

If you experience discomfort, redness and swelling of the fingers followed by whitening and loss of feeling, consult your physician before further exposing yourself to cold and vibration.

Repetitive Stress Injuries --

It is believed that overusing the muscles and tendons of the fingers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI). An extreme RSI condition is Carpal Tunnel Syndrome (CTS), which could occur when your wrist swells and squeezes a vital nerve that runs through the area. Some believe that prolonged exposure to vibration may contribute to CTS. CTS can cause severe pain for months or even years.

To reduce the risk of RSI/CTS, do the following:

Avoid using your wrist in a bent, extended or twisted position. Instead try to maintain a straight wrist position. Also, when grasping, use your whole hand, not just the thumb and index finger.

Take periodic breaks to minimize repetition and rest your hands.

Reduce the speed and force in which you do the repetitive movement.

Do exercises to strengthen the hand and arm muscles.

Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness or pain in the fingers, hands, wrists or arms. The sooner RSI/ CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented.

EQUIPMENT

WARNING DANGER

Use only ECHO approved attachments. Serious injury may result from the use of a non approved attachment combination. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Read and comply with all safety instructions listed in this manual and safety manual.

Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed.

Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found.

Inspect shield for damage and ensure that the cut-off knife issecurely in place. Replace if either is damaged or missing.

Check that the cutting attachment is firmly attached and in safe operating condition.

Check that front (loop) handle and optional shoulder/waist harness are adjusted for safe, comfortable operation. See Assembly for proper adjustment.

Have repairs done only by an authorized ECHO Service Dealer.

Keep exhaust area clear of flammable debris. Avoid contact during and immediately after operation.

6

SAFE OPERATION

WARNING DANGER

Do not operate this product indoors or in inadequately ventilated areas. Engine exhaust contains poisonous emissions and can cause serious injury or death.

Provide all operators of this equipment with the Operator's Manual and instructions for safe operation.

KeepAFirmGrip

Hold the front and rear handles with both hands with thumbs and fingers encircling the handles

Keep A Solid Stance

Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach.

EMISSION CONTROL

EPA Phase 2

The emission control system for this engine is EM (Engine Modification).

Emission Control Label located on Engine

(EXAMPLE ONLY, information on label varies by FAMILY).

IMPORTANT ENGINE INFORMATION

ENGINE FAMILY: 2EHXS.0214RA DISPLACEMENT: 21.2 CC

EMISSION COMPLIANCE PERIOD : 300 hours

THIS ENGINE MEETS U.S. EPA PHASE 2 EMISSION REGULATIONS FOR SMALL NON ROAD ENGINE. REFER TO OWNER'S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS.

PRODUCT EMISSION DURABILITY

The 300 hour emission durability compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

DESCRIPTION

The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging restrictions, shield installation and positioning of the front handle are necessary.

After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts.

GRASS TRIMMER

7

OPERATOR'S MANUAL

CONTENT LIST

_____ 1 - Trimmer Assembly

 

 

_____

-

Power Head

 

 

_____

-

Drive Shaft Assembly

 

 

_____ 1

- Plastic Bag (Co-Pack)

 

 

_____

-

Operator's Manual

 

 

_____

-

Safety Manual

 

 

_____

-

Shield Assembly

 

 

_____ 1 - Nylon Trimmer Head

 

 

_____

- 12, 8 in. x .080 Pre-cut Nylon Line

 

 

_____

-

Hardware Bag

 

 

_____

-

1, Locking Tool

 

 

_____

- 1, Locknut 3/8-24

 

 

_____

-

1, Small Washer

 

 

_____

-

1, Large Washer

 

10

_____

-

Warranty Card & Limited Warranty

18

 

_____

-

Safety Glasses

 

 

_____

-

Oil 2 Stroke

17

 

 

 

 

 

 

 

19

16

 

 

 

 

 

 

 

 

 

11

 

 

 

15

 

 

 

 

14

 

5

 

4

3

 

 

 

 

 

13

12

 

7

 

2

6

1

 

 

8

9

8

1.POWER HEAD - Factory Assembled to the Drive shaft assembly. Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter.

2.GRIP - Rear (right hand) handle.

3.FRONT HANDLE - The Front (loop) handle is factory assembled to the Drive Shaft assembly but must be repositioned for proper cutting attitude and operator comfort.

4.DRIVE SHAFT ASSEMBLY - Factory Assembled to the Power Head. Includes the Rear (right hand) Handle Assembly, Bearing Housing Assembly, Throttle Trigger, Front (loop, left hand) Handle Assembly, Flexible Drive Cable and Safety Decals.

5.NYLON CUTTER HEAD - Contains replaceable nylon trimming lines.

6.DEBRIS SHIELD ASSEMBLY - Included in plastic bag (co-pack). MUST be installed on unit before use, see Assembly Instructions. Shield assembly includes the Cut-Off Knife and Safety Decal. Mounts on the Bearing Housing Assembly just above the cutting attachment. Helps protect the operator by deflecting debris produced during the trimming operation.

7.CUT-OFF KNIFE - Trims line to the correct length (5"). If trimmer is operated without a cut-off knife the line will become too long - more than (5") - the operating speed will slow, the engine overheat and performance will suffer.

8.THROTTLE TRIGGER - Spring loaded to return to idle when released. During acceleration, press trigger gradually for best operating technique.

9.STOP SWITCH - "TOGGLE SWITCH" mounted on the engine. Move switch UP to RUN, DOWN to STOP.

10.ARM REST - Provides arm rest during operation and protects arm from hot engine.

11.SPARK ARRESTOR - CATALYTIC MUFFLER / MUFFLER -The muffler or catalytic muffler controls exhaust noise and emission. The spark arrestor screen prevents hot, glowing particles of carbon from leaving the muffler. Keep exhaust area clear of flammable debris.

12.FUEL TANK - Contains fuel and fuel filter.

13.FUEL TANK CAP - Cover and seals fuel tank opening.

14.RECOIL STARTER HANDLE/ROPE - Pull recoil starter handle/rope using light pulling force, approximately 2/3

(2 ft.) of rope length. Two (2) to Six (6) pulls are required to properly tension starter spring prior to automatic engine engagement. DO NOT let handle snap back or damage to unit will occur.

15.PRIMER BULB - Pumping primer bulb before starting engine draws fresh fuel from the fuel tank priming the carburetor for starting. Pump primer bulb until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

16.AIR CLEANER - Contains replaceable filter element.

17.CHOKE - Located above the air cleaner housing. Controls operation of choke. Move choke to starting position (Close Choke) and back to run position (Open Choke).

18.SPARK PLUG - Provides spark to ignite fuel mixture.

19.SAFETY VIDEO - (Not included with unit) P/N 99922202540 English version only is available at a cost of $5.00 from ECHO, INC. or any authorized ECHO dealer. The video overviews safety precautions and proper operating techniques and is supplemental to the Safety Manual. Read and understand the Safety Manual for complete information on safe operation.

 

 

GRASS TRIMMER

9

 

 

OPERATOR'S MANUAL

SPECIFICATIONS

 

 

 

 

 

 

 

 

 

MODEL

GT-2000EZR

 

 

 

 

 

 

 

 

Length

1405 mm ( 55.3 in.)

 

 

 

 

 

 

 

 

Width

315 mm (12.4 in.)

 

 

 

 

 

 

 

 

Height

360 mm (14.2 in.)

 

 

 

 

 

 

 

 

Weight (dry) w/Cutter Head

4.55 kg (10.0 lb.)

 

 

 

 

 

 

 

 

Engine Type

Air cooled, two-stroke, single cylinder gasoline engine

 

 

 

 

 

 

 

 

Bore

32.2 mm (1.268 in.)

 

 

 

 

 

 

 

 

Stroke

26.0 mm (1.04 in.)

 

 

 

 

 

 

 

 

Displacement

21.2 cc (1.29 cu. in.)

 

 

 

 

 

 

 

 

Exhaust System

Spark Arrestor Muffler

 

 

 

 

 

 

 

 

Carburetor

Zama diaphragm model w/primer

 

 

 

 

 

 

 

 

Ignition System

Flywheel magneto, capacitor discharge

 

 

 

 

 

 

 

 

Spark Plug

NGK BPM-7A Gap 0.65 mm (0.026 in.)

 

 

 

 

 

 

 

 

Fuel

Mixed (Gasoline and Two-stroke Oil)

 

 

 

 

 

 

 

 

Fuel/Oil Ratio

50:1 ECHO High Performance, two-stroke air cooled engine oil

 

 

 

 

 

 

 

 

Gasoline

89 Octane unleaded. DO NOT use fuel containing methyl alcohol, more than

 

 

 

10% ethyl alcohol or 15% MTBE.

 

 

 

 

 

 

 

 

 

 

 

 

Oil

50:1 ECHO High Performance, two-stroke air cooled engine oil

 

 

 

 

 

 

 

 

Fuel Tank Capacity

0.4 lit. (14.0 US fl. oz.)

 

 

 

 

 

 

 

 

Starter System

Semi-automatic Recoil Starter Assist

 

 

 

 

 

 

 

 

Clutch

Centrifugal Type

 

 

 

 

 

 

 

 

Drive Shaft

1/4" Flex Shaft

 

 

 

 

 

 

 

 

Rotating Direction

Clockwise viewed from top

 

 

 

 

 

 

 

 

Cutter Head

Nylon line head (2-line) with .080 Line capacity 203 mm (8 in.)

 

 

 

 

 

 

 

 

Handle

Left - D-Loop, Right - Grip

 

 

 

 

 

 

 

 

Shoulder Harness

Optional P/N 99944200201

 

 

 

 

 

 

 

 

Idle Speed (RPM)

2600 - 3300

 

 

 

 

 

 

 

 

Wide Open Throttle Speed (W.O.T.)

6500 - 7800

 

 

 

with Nylon Line Head (RPM)

 

 

 

 

 

 

 

 

Loading...
+ 18 hidden pages