EBAA Iron 1506TD Installation Manual
Tru-Dual®
Series 1506TD
Bell Restraint Harness for Ductile Iron & C900 PVC Pipe
Split Serrated Restraint Ring on Both Sides of the Bell
Installation Instructions
1. The Series 1500TD is designed for restraining Ductile Iron pipe or
C900 PVC pipe at push-on joints. It has a serrated split restraint ring
with heat treated inserts on the spigot and behind the bell.
2. Assemble the push-on joint per the pipe manufacturer’s instructions.
3. Install both halves of one of the serrated rings around the pipe behind
the bell, tapping each half into place. Make sure that the complete ID
of the ring is touching the pipe before installing the side bolts. Install
the side bolts and tighten evenly to 60 ft-lbs torque (110 ft-lbs on 8
inch, 10 inch and 12 inch).
4. Remove the side bolts from the second serrated restraint ring. Use the
tie bolts to determine the proper location of the restraint ring on the
spigot. Allow enough room on the tie bolt to fully engage the nuts.
5. Install both halves of the restraint ring at the proper location, tapping
each half into place. Make sure that the complete ID of the ring is
touching the pipe before installing the side bolts. Tighten the side bolts
evenly to 60 ft-lbs torque (110 ft-lbs on 8 inch, 10 inch and 12 inch).
CONTENTS
Qty. Description
2 6 in. 1500TD Restraint
Rings
2 Low Alloy Steel Tie Rods w/
Nuts
Restraints Made in The USA
6. Place nuts on the tie bolts and tighten until they are snug. Allow
enough room on the tie bolt to fully engage the nut with several
threads showing. Do not tighten these bolts enough to force the spigot
further into the bell of the joint.
0408-D
APPROXIMATE SHIPPING WEIGHT: 20.20 lbs.
Series 1506TD
Bell Restraint Harness for Ductile Iron & C900 PVC Pipe
Split Serrated Restraint Ring on Both Sides of the Bell
1506TD00
For use on water or wastewater pipelines subject
to hydrostatic pressure and tested in accordance
with either AWWA C600 or ASTM D2774
Copyright 2018 © EBAA IRON, Inc. All Rights Reserved
EBAA IRON SALES, Inc.
P.O. Box 857, Eastland, TX 76448
Tel: (254) 629-1731
Fax: (254) 629-8931
Toll: (800) 433-1716
contact@ebaa.com
www.ebaa.com
Made in the USA
Loading...