Loading...
TGX 4 Channel Power Amplifier
TGX10 | TGX20
en |
Installation manual |
TGX 4-Channel Power Amplifier Table of contents | en 3
Table of contents
1 |
Safety |
4 |
1.1 |
Safety messages explained |
4 |
1.2 |
Important safety instructions |
4 |
1.3 |
Safety precautions |
6 |
1.4 |
High frequency interference – FCC/EN55032 |
6 |
1.5 |
Notices |
7 |
2 |
|
|
About this manual |
8 |
|
2.1 |
Manual purpose and intended audience |
8 |
2.2 |
Digital document |
8 |
3 |
System overview |
9 |
3.1 |
Application area |
9 |
3.2 |
Features |
9 |
3.3 |
Unpacking and inspection |
9 |
3.4 |
Scope of delivery |
9 |
4 |
Planning information |
11 |
5 |
Installation |
12 |
5.1 |
Mounting |
12 |
5.2 |
Mains power connection |
12 |
5.3 |
Power |
12 |
5.4 |
Ventilation |
12 |
6 |
|
|
Controls, indicators, and connections |
14 |
|
6.1 |
Front panel |
14 |
6.2 |
Rear panel |
14 |
6.3 |
Power outputs |
15 |
6.4 |
Audio inputs |
15 |
6.5 |
Fan cooling |
16 |
7 |
|
|
Power amplifier menu navigation |
17 |
|
7.1 |
LCD display and control menu |
17 |
7.1.1 |
Home screen |
17 |
7.1.2 |
Main menu |
17 |
7.1.3 |
Channel page |
18 |
7.2 |
Remote control via software |
20 |
8 |
Technical data |
21 |
8.1 |
TGX10 |
21 |
8.2 |
TGX20 |
24 |
8.3 |
Mains operation & resulting temperature |
27 |
8.4 |
Block diagram |
28 |
8.5 |
Dimensions |
29 |
9 |
|
|
Accessories |
30 |
Bosch Security Systems, Inc. |
Installation manual |
2018.05 | 01 | F.01U.330.704 |
4 |
en | Safety |
TGX 4-Channel Power Amplifier |
|
|
|
1 Safety
1.1Safety messages explained
Four types of signs can be used in this manual. The type is closely related to the effect that may be caused if it is not observed. These signs - from least severe effect to most severe effect - are:
Notice!
Containing additional information. Usually, not observing a ‘notice’ does not result in damage to the equipment or personal injuries.
Caution!
!The equipment or the property can be damaged, or persons can be lightly injured if the alert is not observed.
Warning!
!The equipment or the property can be seriously damaged, or persons can be severely injured if the alert is not observed.
Danger!
Not observing the alert can lead to severe injuries or death.
1.2Important safety instructions
Danger!
The lightning symbol inside a triangle notifies the user of high-voltage, uninsulated lines and contacts inside the devices that could result in fatal electrocution if touched.
Warning!
!An exclamation mark inside a triangle refers the user to important operating and service instructions in the documentation for the equipment.
1.Read these safety notes.
2.Keep these safety notes in a safe place.
3.Heed all warnings.
4.Observe all instructions.
5.Do not operate the device in close proximity to water.
2018.05 | 01 | F.01U.330.704 |
Installation manual |
Bosch Security Systems, Inc. |
TGX 4-Channel Power Amplifier |
Safety | en |
5 |
|
|
|
6.Use only a dry cloth to clean the unit.
7.Do not cover any ventilation slots. Always refer to the manufacturer's instructions when installing the device.
8.Do not install the device close to heaters, ovens, or other heat sources.
9.Note: The device must only be operated via the mains power supply with a safety ground connector. Do not disable the safety ground connection function of the supplied power cable. If the plug of the supplied cable does not fit your mains socket, please contact your electrician.
10.Ensure that it is not possible to stand on the mains cable. Take precautions to ensure the mains cable cannot become crushed, particularly near the device connector and mains plug.
11.Only use accessories/extensions for the device that have been approved by the manufacturer.
12.Unplug the device if there is risk of lightning strike or in the event of long periods of inactivity. However, this does not apply if the device is to be used as part of an evacuation system!
13.Have all service work and repairs performed by a trained customer service technician only. Service work must be carried out immediately following any damage such as damage to the mains cable or plug, if fluid or any object enters the device, if the device has been used in rain or become wet, or if the device has been dropped or no longer works correctly.
14.Please ensure that no dripping water or spray can penetrate the inside of the device. Do not place any objects filled with fluids, such as vases or drinking vessels, on top of the device.
15.To ensure the device is completely free of voltage, unplug the device from the power supply.
16.When installing the device, ensure the plug is freely accessible.
17.Do not place any sources of open flame, such as lit candles, on top of the device.
18.This PROTECTION CLASS I device must be connected to a MAINS socket with a safety ground connection.
Caution!
Use only manufacturer-approved carts, stands, brackets, or tables that you acquired together with the device. When using carts to move the device, make sure the transported equipment and the cart itself cannot tip over or cause injury or material damage.
IMPORTANT SERVICE INFORMATION
Caution!
This service information is for use by qualified service personnel only. To avoid the risk of
!electric shock, do not perform any maintenance work that is not described in the operating instructions unless you are qualified to do so. Have all service work and repairs performed by a trained customer service technician.
1.Repair work on the device must comply with the safety standards specified in EN 60065 (VDE 0860).
2.A mains isolating transformer must be used during any work for which the opened device is connected to and operated with mains voltage.
3.The device must be free of any voltage before performing any alterations with upgrade sets, switching the mains voltage, or performing any other modifications.
Bosch Security Systems, Inc. |
Installation manual |
2018.05 | 01 | F.01U.330.704 |
6 |
en | Safety |
TGX 4-Channel Power Amplifier |
|
|
|
4.The minimum distance between voltage-carrying parts and metal parts that can be touched (such as the metal housing) or between mains poles is 3 mm, and must be observed at all times.
5.The minimum distance between voltage-carrying parts and circuit parts that are not connected to the mains (secondary) is 6 mm, and must be observed at all times.
6.Special components that are marked with the safety symbol in the circuit diagram (note) must only be replaced with original parts.
7.Unauthorized changes to the circuitry are prohibited.
8.The protective measures issued by the relevant trade organizations and applicable at the place of repair must be observed. This includes the properties and configuration of the workplace.
9.Observe the guidelines with respect to handling MOS components.
Danger!
SAFETY COMPONENT (MUST BE REPLACED BY ORIGINAL PART)
1.3Safety precautions
Speaker system damage and protection of human beings
Power amps provide extremely high power output that might be dangerous for human beings as well as for the connected speaker systems. High output voltages can damage or even destroy the connected speaker systems, especially, when the amplifier is operated in bridge mode. Prior to connecting any loudspeakers, make sure to check the speaker system’s specifications for continuous and peak power handling capacities. Even if amplification has been reduced through lowering the input level controls on the amplifier’s front panel, it is still possible to achieve full power output with a sufficiently high input signal.
Danger!
Danger at the loudspeaker/power outputs
Power amplifiers are capable of producing dangerously high voltage output that is present at the output connectors.
To protect yourself from electric shock, do not touch any blank speaker cables during operation of the power amp.
Danger!
The terminals marked with a lightning bolt are hazardous live and the external wiring connected to these terminals requires installation by an instructed person or the use of ready-made leads of cords.
Danger!
In case of using the amplifier with speakers including a primary tapped transformer, it is possible that during operation shock hazard voltages may be present at the taps of the transformer.
Therefore, the taps have to be insulated sufficiently in accordance with applicable safety regulations.
1.4High frequency interference – FCC/EN55032
IMPORTANT: Do not modify this unit! Changes or modifications not expressly approved by the manufacturer could void the user’s authority, granted by the FCC, to operate the equipment.
2018.05 | 01 | F.01U.330.704 |
Installation manual |
Bosch Security Systems, Inc. |
TGX 4-Channel Power Amplifier |
Safety | en |
7 |
|
|
|
|
|
|
Notice!
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules and EN55032. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
1.5Notices
Old electrical and electronic appliances
Electrical or electronic devices that are no longer serviceable must be collected separately and sent for environmentally compatible recycling (in accordance with the European Waste Electrical and Electronic Equipment Directive).
To dispose of old electrical or electronic devices, you should use the return and collection systems put in place in the country concerned.
Copyright and disclaimer
All rights reserved. No part of this document may be reproduced or transmitted in any form by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of the publisher. For information on getting permission for reprints and excerpts, contact Dynacord.
All content including specifications, data, and illustrations in this manual are subject to change without prior notice.
Dante is a registered trademark of Audinate Pty Ltd.
NEUTRIK, speakON, powerCON, and etherCON are registered trademarks of Neutrik AG.
IT security disclaimer
In order to offer maximum compatibility with all networked audio devices and to allow for fast and easy setup and maintenance, our OMNEO-enabled amplifier products do not support encrypted communications for audio or control data and do not verify the authenticity of any Dante or OCA controllers (or any other node) on the network.
This means that these devices do not take any special precautions against malicious or accidental attacks via their network interfaces. Such attacks happen every day on the public internet. It is strongly recommended to set up the system in a safe, isolated network, meaning a network where all hardware components are known and physically owned and none of them is connected to the public internet.
Network cabling
The OMNEO network comprises audio transport using the Dante protocol as well as OCA control commands. In order to guarantee the product performance according to specifications, network cabling has to be shielded, fulfilling the requirements of CAT 5e as a minimum.
For integration in networks, the network switches require a dedicated configuration. Further details will be explained in the documentation of the related network control software.
Bosch Security Systems, Inc. |
Installation manual |
2018.05 | 01 | F.01U.330.704 |
8 |
en | About this manual |
TGX 4-Channel Power Amplifier |
|
|
|
2 |
About this manual |
|
2.1Manual purpose and intended audience
The purpose of this manual is to provide information required for installing, configuring, operating, and maintaining the TGX 4-channel power amplifier. This manual is intended for installers and operators of TGX 4-channel powered amplifiers.
Read through this manual to familiarize yourself with the safety information, features, and applications before you use these products.
2.2Digital document
This manual is available as a digital document in the Adobe Portable Document Format (PDF). You can find information about Dynacord products on the product related information at www.dynacord.com.
2018.05 | 01 | F.01U.330.704 |
Installation manual |
Bosch Security Systems, Inc. |
TGX 4-Channel Power Amplifier |
System overview | en 9 |
|
|
|
|
3 |
System overview |
|
3.1Application area
The TGX 4-channel power amplifiers are designed to power professional loudspeaker systems in mobile audio applications such as cultural, corporate or sports events, and other audio use cases that require very high-power multichannel amplifier with sophisticated speaker processing and audio/control networking.
3.2Features
TGX10
–Multichannel DSP amplifier for live applications
–Power density of 10kW in 2RU
–Fully integrated DSP with native 96 kHz and FIR Drive technology
–OMNEO integration for seamless compatibility with Dante and OCA
–Full color touch screen for control without software
TGX20
–Multichannel DSP amplifier for live applications
–Market leading power density with 20kW in 2RU
–Fully integrated DSP with native 96 kHz and FIR Drive technology
–OMNEO integration for seamless compatibility with Dante and OCA
–Full color touch screen for control without software
3.3Unpacking and inspection
Carefully open the packaging and take out the power amplifier. Inspect the power amp’s enclosure for damages that might have happened during transportation. Each amplifier is examined and tested in detail before leaving the manufacturing site to ensure that it arrives in perfect condition at your place. Please inform the transport company immediately, if the power amplifier shows any damage. Being the addressee, you are the only person who can claim damages in transit. Keep the cardboard box and all packaging materials for inspection by the transport company.
Keeping the cardboard box including all packing materials is also recommended, if the power amplifier shows no external damages.
Caution!
!Do not ship the power amp in any other but its original packaging.
When shipping the power amp, make sure to always use its original box and packaging materials. Packing the power amplifier like it was packed by the manufacturer guarantees optimum protection from transport damage.
3.4Scope of delivery
|
Quantity |
Component |
|
|
|
|
1 |
TGX 4-channel power amplifier |
|
|
|
|
4 |
M6x20 screw for rack mounting |
|
|
|
|
1 |
Installation manual |
|
|
|
Bosch Security Systems, Inc. |
Installation manual |
2018.05 | 01 | F.01U.330.704 |
10 en | System overview TGX 4-Channel Power Amplifier
Quantity |
Component |
|
|
1 |
Mains power connector, 32 A with safety & assembly instruction |
|
|
1 |
Safety instruction booklet |
|
|
Keep the original invoice that states the purchase/delivery date in a safe place.
2018.05 | 01 | F.01U.330.704 |
Installation manual |
Bosch Security Systems, Inc. |
Loading...