Rhino 6000
Advanced Labeling Tool with PC Connectivity
Quick Start Guide ................................................ |
1 |
Guide de démarrage rapide ................................. |
7 |
Beknopte handleiding........................................ |
15 |
Erste Schritte..................................................... |
21 |
Quick Start Guide
Follow these steps to install your RHINO 6000 label printer and software, and print your first label.
NOTE Do not plug the printer into your computer until asked to do so during the software installation.
2.Make sure you have all the items shown in Figure 1.
Quick Start and Quick Reference Guides
|
USB cable |
Two RHINO |
Power adapter |
label cassettes |
|
CD-ROM
Battery pack
RHINO 6000 label printer
1
The label printer can operate using the rechargable battery pack or the AC power adapter. For temporary backup power, six AA alkaline batteries can be used.
To charge the battery pack the first time you use the printer, insert the battery pack and plug in the power adapter. Charging the battery pack the first time takes approximately eight hours. Recharging the battery pack will take approximately two hours.
1.Remove the battery compartment cover. See Figure 2.
1.Plug the power adapter into the power connector on the bottom of the printer. See Figure 3.
2
Your printer comes with two RHINO label cassettes.
Visit www.dymo.com for information about purchasing additional label cassettes.
1.Lift the label cassette cover to open the label compartment. See Figure 4.
Lift
Eject
Button
3
Your printer connects to your computer using the USB connection located on the top of the printer.
NOTE Do not connect the printer to your computer until prompted to do so during the software installation.
5. Installing the Software |
Figure 5 |
To install the software |
|
1.Insert the RHINO Connect Software CD into your CD-ROM drive. After a few seconds, the installation screen appears. If the installation screen does not appear:
a.Click Start and then Run on the Windows taskbar. The Run dialog box appears.
b.Enter D:\setup.exe (where D is the CD-ROM drive letter) and click OK.
2.Follow the on-screen instructions.
4
You are now ready to print your first label. The first time you turn on the printer, you are asked to select your language and units of measure. You are also asked to select the width of the tape cassette currently inserted in the printer.
1.Press to turn on the power.
2.Use the up and down arrow keys to select the language you wish to use and press OK.
3.Use the up and down arrow keys to select the units of measure you wish to use and press OK.
4.Select the tape width of the tape cassette currently inserted in the printer and press OK.
6.Press PRINT.
7.Press CUT and remove the label.
Congratulations! You have printed your first label.
5
The following figure shows some of the many features available in RHINO Connect Software.
|
Add images, barcodes, |
Quickly create a series of |
|
Change the label |
symbols, and predefined text. |
labels using serialization. |
|
type on the fly. |
|
|
|
Work in two |
|
|
|
modes: Create |
|
|
|
labels and print |
|
|
|
directly to the |
|
|
|
printer, or create |
|
|
|
labels for transfer |
|
|
|
to a RHINO printer. |
|
|
|
Preview your |
|
|
|
labels exactly as |
|
|
|
they will print. |
|
|
|
Use the Data |
|
|
|
Editor to enter |
|
|
|
label text and |
|
|
|
add labels to |
|
|
|
the label file. |
|
|
|
Transfer label files and custom symbols and text to your RHINO printer.
Set label properties to further customize your labels.
For complete details on how to use the software, refer to the RHINO Connect Software online help.
6
Guide de démarrage rapide
Suivez les étapes ci-dessous pour installer le logiciel et l’imprimante d’étiquettes RHINO 6000 et imprimer votre première étiquette.
NOTE Ne reliez pas l’imprimante à l’ordinateur avant d’être invité à le faire au cours de l’installation du logiciel.
2.Assurez-vous que vous disposez de tous les éléments indiqués dans la Figure 1.
Guide de démarrage rapide et Aide-mémoire
|
Câble USB |
Deux cassettes |
Adaptateur |
d’étiquettes RHINO |
|
CD-ROM
Bloc-piles
Imprimante d’étiquettes RHINO 6000
7
L’imprimante d’étiquettes peut être alimentée par des piles rechargeables ou par un adaptateur c.a. Pour une alimentation de réserve temporaire, vous pouvez utiliser six piles alcalines AA.
Pour charger le bloc-piles la première fois que vous utilisez l’imprimante, mettez-le en place et branchez l’adaptateur. Le premier chargement des piles dure huit heures approximativement. Il faut compter ensuite deux heures environ pour les recharger.
1.Retirez le couvercle du compartiment à piles. Voir Figure 2.
2.Placez le bloc-piles dans le compartiment à piles.
1.Branchez l’adaptateur dans le connecteur d’alimentation situé au bas de l’imprimante. Voir Figure 3.
8