M3 | M5
Digital Postal Scale User Guide
Guide d'utilisation de la Balance postale numérique
M3 | M5
DYMO® Digital Postal Scale . . . . . . . . . . . . . . . . .1
Balance postale numérique DYMO . . . . . . . . .7
DYMO® Digital Postal Scale
This User Guide provides instructions for using your DYMO® Digital Postal Scale. Visit www.dymo.com/register to register your scale.
Setting Up the Scale
The scale is powered by three AAA batteries (included).
To set up the scale
1.Unpack the scale.
2.Set the scale on a firm, flat surface.
Power
0.0
TARE
kg |
lb |
HOLD
Tare/
Zero
LCD
display Kg/Lb Hold
Inserting the Batteries
The scale uses three AAA alkaline batteries. The scale automatically turns off after three minutes of inactivity.
To insert the battery
1.Turn the scale over.
2.Remove the battery compartment cover.
3.Insert three AAA batteries as shown.
!Make sure to insert the batteries correctly. Inserting the batteries backwards can damage the scale.
4.Replace battery compartment cover.
!Remove the batteries if the scale will not be used for a long period of time.
Turning On the Power
AAA AAA
The scale has an Auto Shut Off feature which automatically turns off the scale after three minutes of inactivity.
To turn the scale on
♦ Press 
on the front of the scale.
When the scale is first turned on, wait a few seconds for the scale to stabilize before weighing items. The display shows 0.0 or 0.00 when ready.
To turn the scale off
♦Press 
on the front of the scale to turn the scale off.
The scale turns off automatically after three minutes of inactivity.
1
Using the Scale
Always wait for 0.0 or 0.00 to display before placing an item on the scale platform.
After placing an item on the scale, wait for several seconds for the weight to appear. When the scale is ready, a o appears to the left of the weight.
To weigh an item
♦ Place an item on the scale platform.
Using the Tare Feature
You can weigh small items or items that cannot be easily placed on the scale platform by placing the items in a container and using the Tare/Zero button to eliminate the weight of the container.
To use the tare feature
1.
2.
3.
4.
Place an empty container on the platform.
When the scale is ready, press |
0.0 |
. |
TARE |
||
|
|
|
The display is set to zero.
Place the items to be weighed in the container.
The display shows the weight of the items, without the weight of the container.
After removing the container, press |
0.0 |
to reset the scale to zero. |
TARE |
||
|
|
|
Using the Hold Feature
When an item being weighed extends over the front of the scale and you cannot see the display, you can freeze the display so that the weight is still displayed after removing the item.
To use the Hold feature
1.Press HOLD .
The display shows HOLD and then 0.0 or 0.00 when ready.
2.Place the item on the scale.
3.After a few seconds, remove the item from the scale.
The weight continues to be displayed for about ten seconds.
Changing the Units of Measure
Your scale can display weight in English (pounds) or metric (kilograms) units. The default unit of measure is English. Each time you turn on the scale, the scale defaults to the unit of measure that was last used.
To change the units of measure
♦ Press
kg |
lb |
to toggle between English and metric units.
2
Loading...