Dymo LT100-H User Manual

2.31 Mb
Loading...

LT-100H

Quick Reference Guide

Getting to Know Your Label Maker

Font Size # Lines CAPs Num Lock

 

Label Exit

 

LCD Display

Settings

Cutter

Power

 

Insert

Print

Cancel

Format

 

Memory Save

OK

Navigation

Memory Recall

 

 

Num Lock

 

CAPs

Clear

Backspace

Space Bar

 

 

Power Connector

About Your New Label Maker

With your new DYMO LetraTag® label maker, you can create a wide variety of high-quality, self-adhesive labels. The label maker uses DYMO LetraTag (LT) 1/2 inch (12 mm) label cassettes. LT label cassettes are available in a variety of colors and materials such as paper, plastic, metallic, magnetic, and iron-on.

Visit www.dymo.com for a complete User Guide, and for information on obtaining labels and an optional AC adapter for your label maker.

Product Registration

Visit www.dymo.com/registration to register your label maker online.

Getting Started

Follow the instructions in this section to print your first label.

1 Inserting the Batteries

1. Remove the battery compartment cover. 2. Insert the batteries following the polarity markings (+ and –).

3. Replace the cover. ! Remove the batteries if the label maker will not

be used for a long period of time.

Figure 1

2 Inserting the Label Cassette

1.Press and release the label cassette cover to open the label compartment. See Figure 2.

2.Remove the protective cardboard insert from label exit slot. See Figure 3.

3.Insert the cassette with the label positioned between the print head and pinch roller.

4.Press firmly until cassette clicks into place.

5.Close the label cassette cover and press to turn on the power.

2

Remove cardboard insert

Figure 3

3Selecting a Language

1.Press .

2.Use the up or down arrow key to select Language and press .

3.Use the up or down arrow key to select the language you want and press .

4Setting the Date and Time

1.Press .

2.Select Set Date and press . The default date is displayed.

3.Use the left or right arrow key to move the cursor over each setting (month, day, and year) and use the up or down arrow key to increase or decrease the value.

4.When finished, press .The default time is displayed.

5.Use the left or right arrow key to move the cursor over each setting (hours and minutes) and use the up or down arrow key to increase or decrease the value.

6.When finished, press .

5Printing Your First Label

1.Enter text to create a simple label.

2.Press .

3.Press the cutter button to cut the label.

4.Remove the paper backing from the label to expose the adhesive, and then attach the label.

Designing Your Label

Changing the Font Size

Five font sizes are available for your labels: Extra Small, Small, Medium,

Large, and Extra Large.

1.Press the key.

2.Select Size and press .

3.Select the desired font size and then press .

Adding Font Styles

You can choose from six different font styles:

Normal

Outline

Bold

Shadow

Italic

Vertical

1.

Press

.

 

 

2.

Select Style and press

.

 

3.

Select a font style and press

.

Creating Two-Line Labels

1.Type the text for the first line and press.

2.Select Second Line and press . A multi-line symbol is inserted at the end of the first line, but will not print on the label.

3. Type the text for the second line.

Continued

 

Adding the Date

1.Press.

2.Select Date and press .

Adding Box and Underline Styles

You can highlight your text by choosing a box or underline style.

Underline

Edged

Square

Train

Pointed

Sweet Hearts

Rounded

Flowers

Crocodile

 

1.Press .

2.Select Borders, and press .

3.Select underline or a box style and press .

Adding International Characters

The label maker supports the extended Latin character set using RACE technology. Similar to using a mobile phone keypad, when you hold down a letter key for longer than one second, you will scroll through variations on that letter. To insert the character, release the key when the desired character appears.

Adding Symbols

The label maker supports the symbols shown below.

Row

Position in Row

 

 

 

 

Row

Position in Row

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adding Symbols (continued)

1.Press, select Symbols, and press . The first row of symbols shown in the table appears in the display.

2.Use the arrow keys to move to the desired symbol. The left and right arrows move horizontally along a row of symbols. The up and down arrow keys scroll vertically through the rows of symbols.

3.When you locate the symbol, press to add the symbol to your label.

Previewing Your Label

1.Press .

2.Select Preview and press .

Clearing the Display

♦♦Pressto clear all label text and formatting from the display.

Storing Label Text

You can store up to nine specific labels you use frequently.

1.Press.

2.Select a memory location and press .

Recalling Stored Labels

1.

Press

.

 

 

2.

Select a label to recall and press

.

 

To clear a memory field, first recall a label and then press

.

Caring for Your Label Maker

Troubleshooting

This product is CE marked in accordance with the EMC directive and the low voltage directive and is designed to conform with the following international standards:

Clean your label maker from time to time to keep it working properly. Clean the cutter blade each time you replace the label cassette.

! The cutter blade is extremely sharp. Use caution when cleaning.

Cleaning the Cutter Blade

1.

Dampen a cotton ball with alcohol.

Press in

2.

Remove the label cassette.

and hold

Print head

3.

Place the tip of a ball-point pen or

 

 

pencil on the black post as shown in

 

 

Figure 4, and press the post down.

 

4.

While holding down the post, press

 

 

and hold the cutter lever to expose

 

the cutter blade.

Figure 4

 

5.Release the post and clean both sides of the blade with the cotton ball.

6.Release the cutter lever.

Cleaning the Print Head

1.Remove the label cassette.

2.Remove the cleaning tool from inside the label compartment cover.

3.Gently wipe the padded side of the tool across the print head.

 

Problem/Error Message

Solution

 

 

No display

• Ensure the label maker is turned on.

 

 

 

Replace discharged batteries.

 

 

Poor Print Quality

• Replace batteries or attach power adapter.

 

 

 

• Ensure label cassette is installed properly.

 

 

 

• Clean the print head.

 

 

 

• Replace the label cassette.

 

 

Poor Cutter Performance

Clean the cutter blade. See Caring for Your

 

 

 

Label Maker.

 

 

Printing

No action required.

 

 

 

Message disappears when printing is finished.

 

 

Too many characters

 

 

 

 

Exceeded maximum number of

Delete some or all of the buffer text.

 

 

characters in buffer.

 

 

 

 

Battery low

 

 

 

 

Batteries almost discharged.

Replace batteries or connect AC power adapter.

 

 

Tape Jam

• Remove jammed label; replace label cassette.

 

 

Motor is stalled due to label jam.

Clean cutter blade.

 

If you still need assistance, contact DYMO Customer Support at (203) 588-2500. You can also visit the DYMO Web site at www.dymo.com.

US FCC Class B Compatibility

Safety - EN 60950, IEC 950, UL 1950

EMC Compatibility EN 61000 3-2/3; EN 61000 4-2/3/4/5/6/8/11; ENV 50204;

EU Immunity - EN 55024 & addendum A1, A2 Electromagnetic Compatibility (EMC) - Information Technology equipment, Immunity Characteristics

Emissions – EN 61000-6-3: Electromagnetic Compatibility (EMC) - Part 6: Generic Standards - Section 3: Emission standard for residential, commercial and light industrial environments.

RoHS 2002/95/EC

Distributed by: DYMO, Stamford, CT

800-426-7827: www.dymo.com ©2008 Sanford, L.P.

W001835 Rev. 2/09