Dymo LabelMANAGER 9000 User Manual

0 (0)
Dymo LabelMANAGER 9000 User Manual

A

B

 

B

C

C C

D

D

E

Introduction

The Dymo 9000 Electronic Labelmaker enables you to create a wide variety of high quality self-adhesive labels. These instructions describe how to use your Labelmaker in stand-alone mode; for PC-Link operation consult the relevant sections of the Dymo Label Software manual.

The Labelmaker uses 6mm (1/4"), 12mm (1/2"), 19mm (3/4") 24mm (1") or 32mm (11/4") wide tape

cassettes in a number of label colours. Labels can be tab-cut for easy removal from the backing tape.

Text can be printed horizontally or v e r t i c a l l y in a variety of sizes and styles and can be left-justified, right-justified or centred on the label.

Warranty Registration

Please complete the warranty registration card and return it to your national customer service address within seven days – see the warranty booklet for details.

Power Supply

AC ADAPTOR

Connect the AC adaptor to socket A .

Use only the special AC adaptor designed for the DYMO 9000 Labelmaker.

An internal battery will retain memory settings for up to three months. The battery is charged while the Labelmaker is connected to the AC adaptor.

Changing the cassette

Ensure that tape and ribbon are taut across mouths of cassettes (wind the ink ribbon cassette on a little if necessary before inserting cassette).

Insert tape cassette B as shown.

Insert correct ink ribbon cassette B as shown.

Note – interlocks C prevent you from inserting a

19mm (3/4") ink ribbon cassette with a 24mm (1") or 32mm (11/4") tape cassette.

Insert cassettes with tape and ribbon positioned as shown between pinch roller C and print head C .

Ensure tape and ribbon are positioned correctly.

Ensure that the lid is closed correctly or printing will not start.

A sensor detects if a label is left in the cutter area. When this occurs further printing will be prevented until you remove the label. See ‘Troubleshooting’.

When you change to another cassette size, the Labelmaker will prompt you to select the correct tape width installed – see CASSETTE in the SET UP function menu.

The Display

UK

The display shows:

 

A ‘WYSIWYG’ representation of the label you are creating in edit mode and menus for selecting functions and features.

A status bar at the bottom of the display.

WYSIWYG

DISPLAY

STATUS BAR

Function keys

ON/OFF

Switches the power on and off.

Switches off automatically after ten minutes if no keys are pressed. The last label created will be retained and displayed when next turned on. In addition, any stored settings will be retained.

Note: The internal battery will retain stored settings for up to three months.

CAPITALS CAPS

Press for all subsequent characters to be in UPPER CASE (CAPITALS), as confirmed by the CAPS indicator in the status bar.

Press again to cancel and return to lower case.

SHIFT KEY

Press and hold down before pressing an alphabet key to produce an UPPER CASE (CAPS) character.

For dual purpose keys, press and hold first to produce the legend above the key.

Pressing while CAPS is set will give lower case characters.

DELETE DEL

Press to delete the character to the left of the cursor, or to exit certain function key operations.

CLEAR

CLEAR TEXT + DEL

Press to clear all the current text but leave the text size and other settings unchanged. Also use to exit or clear certain function key operations.

ESCAPE ESC

Press to exit certain function key operations.

NEW

NEW + ESC

Press to clear the workspace and return all settings back to their default state - eg plain text, auto size, etc.

CURSOR KEYS , , or

Press or to move the cursor along the text, one character at a time.

Press and hold to scan quickly through the text.

3

Loading...
+ 4 hidden pages