Dual XDVDN8190 User Manual

0 (0)

XDVDN8190

INSTALLATION/OWNER’S MANUAL

DVD Multimedia Receiver with Internal GPS Navigation and 7” Touch Screen Display

TOUCH

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Collex is under license.

NavMate® is a trademark of Horizon Navigation, Inc. The NavMate software and associated materials are protected by copyright in the US and internationally.

All other trademarks are property of their respective owners.

End-User License Agreement

This End-User License Agreement (EULA) is a legal agreement between you (either an individual or a single entity) and HORIZON NAVIGATION, INC. for the operating software and updates thereof that run the digital map database and associated hardware (collectively the “Software”). By installing or using the Software, you agree to be bound by the terms of this Agreement. If you do not agree to the terms of this Agreement, return the Software, along with all other accompanying items in the form they were purchased, within thirty (30) days after such purchase to the authorized dealer from where the Software was purchased, for a full refund of any fees paid. Use of the Software without acceptance of this Agreement is unauthorized and not permitted.

1.License Grant. HORIZON NAVIGATION, INC. grants you a non-exclusive license to use your purchased copy of the Software for your own internal purposes of accessing the digital map database and running the associated hardware and not for service bureau time-sharing, or other similar purposes.

2.Limitations On Use. You are not permitted to copy, modify, decompile, disassemble, or reverse engineer any portion of the Software without the expressed written permission from HORIZON NAVIGATION, INC.

3.U.S. Government End Users. The Software is provided with Restricted Rights. Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) (1) (II) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 or subparagraphs (c) (1) and (2) of the Commercial Computer Software-Restricted Rights at 48 CFR 52.227-19, as applicable. HORIZON NAVIGATION, INC., 4701 Patrick Henry Dr. Suite 1301 Santa Clara, CA 95054 USA.

4.Indemnity. You agree to indemnify, defend and hold free and harmless HORIZON NAVIGATION, INC., including its licensors, assignees, subsidiaries, affiliated companies, and the respective officers, directors, employees, shareholders, agents, authorized dealers or sales agents, and representatives of each of them from and against any liability, loss, injury, demand, cost, expense, or claim of any kind of character, including but not limited to attorney’s fees, arising out of (a) any use or possession of the Software, or (b) any breach of any warranties or representations made by you in this Agreement or of your obligations under this Agreement.

5.Disclaimer of Warranty. HORIZON NAVIGATION, INC. does not make any warranties or representations, either express or implied, with respect to the software, without limiting the foregoing, HORIZON NAVIGATION, INC. expressly disclaims any implied warranties of quality, performance, merchantability, fitness for a particular purpose or non-infringement. Some states do not allow the exclusion of implied warranties, so some portion of the above exclusion may not apply to you.

6.Limitation of Liability. HORIZON NAVIGATION, INC. shall not be held responsible for any actual, anticipated or speculative loss of profit or direct, indirect, incidental, special, or consequential damages, including, without limitation, loss of revenue, data, or use incurred by you or any third party arising out of your use or possession of the software, whether in an action in contract or tort or based on a warranty, even if HORIZON NAVIGATION, INC. has been advised of the possibility of such damages.

7.Warnings. A. Copies of the digital map database reflect conditions as they existed at various points in time before your receipt

of such copies. Accordingly, copies of the digital database map may contain inaccurate or incomplete data or information due to inaccurate or incomplete source materials, the passage of time, road construction, changing conditions, and otherwise.

B. Neither the Software nor the digital map database include, analyze, process, consider or reflect any of the following categories of information, i.e., neighborhood quality or safety; population density; availability or proximity of law enforcement, emergency, rescue, medical or other assistance; construction work, zones, or hazards; road and lane closures; various legal restrictions (such as vehicular type, weight, load, height and speed restrictions); road slope or grade; bridge height, width, weight or other limits; road, traffic or traffic facilities safety or conditions; weather conditions; pavement characteristics or conditions; special events; traffic congestion; or travel time.

8.Transfer. This Agreement, including all rights, obligations and representations may be transferred to another individual or single entity, provided the same transfer includes the simultaneous transfer of the associated hardware in which the Software is installed, and further provided that such other individual or single entity accepts all the terms of this Agreement. In the event

such individual or single entity to which the Software is transferred does not accept the terms of this agreement, then the License herein automatically terminates. Further use of the Software is unauthorized and not permitted.

9.Governing Law. This Agreement shall be governed by the laws of the State of California, without giving effect to its conflict of laws provisions.

XDVDN8190 PREPARATION

Table of Contents

Page

Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information/Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11 Control  Locations - Monitor Open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17 General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-20 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Anti-theft Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Screen Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23-26 ASP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27-28 AM/FM Tuner Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-32 Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-42 DVD Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-49 CD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-54 MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-58 SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-62 JPEG Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-64 Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65-66 iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67-72 Bluetooth Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73-76 Navigation Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77-83 Rear-Zone Audio Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87-89

XDVDN8190 PREPARATION

WARNING

Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

Several states prohibit the installation of monitors/DVD players if the screen is visible from the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in “Park” and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

When operating this unit, keep the unit’s volume level low enough so that the vehicle’s occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

XDVDN8190 OPERATION

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your DUAL XDVDN8190 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.

Safety Notes:

To prevent damage or injury:

1.Make sure to ground the unit securely to the vehicle chassis ground.

2.Do not remove the top or bottom covers of the unit.

3.Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.

4.Do not subject the unit to excessive shock.

5.When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.

6.To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

7.Use only the provided hardware and wire harness.

8.You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.

9.If you experience problems during installation, consult your nearest DUAL dealer.

10.If the unit malfunctions, reset the unit as described on page 10 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-382-5476.

11.To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

12.When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.

Additional Notes:

1.When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.

2.Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

This device complies with part 15 of the FCC rules and regulations.

Operation is subject to the following two conditions:

1)This device may not cause harmful interference, and

2)This device must accept any interference received, including interference that may cause undesired operation.

XDVDN8190 INSTALLATION

Preparation

Please read entire manual before installation.

Before You Start

•Disconnect negative battery terminal. Consult a qualified technician for instructions.

•Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

•Slide the unit out of the mounting sleeve.

•Install mounting sleeve into opening, bending tabs to secure.

•Connect wiring harness and antenna as shown on pages 6-7. Consult a qualified technician if you are unsure.

•Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).

•Test for correct operation and slide unit into mounting sleeve.

•Attach unit to mounting sleeve using supplied #1 Phillips screws.

•Snap trim ring into place.

•Mount the iplug™ adapter to any smooth clean surface using the supplied double-sided tape or Phillips head screws.

Mounting sleeve opening dimensions 7-3/16” x 2-1/16” (183 mm x 53 mm)

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

XDVDN8190 INSTALLATION

Expanded Wiring Diagram - Inputs/Outputs

GPS Antenna Installation

Determine a suitable location for mounting the GPS antenna. For optimum reception, the antenna should be mounted in the center of the vehicle roof with a minimum of 6” from any window. The antenna can also be mounted to the rear trunk lid at least 4” from the rear window.

Do not install the antenna in a location where it may obstruct the field of view to the skyline such as on the front dashboard or rear deck tray. Clean the mounting location thoroughly before attaching the antenna. The antenna uses a powerful magnet and requires no adhesive to apply.

Do not slide the antenna during positioning as damage to the painted surface can occur. Once the antenna is mounted, carefully plan the cable route to the XDVDN8190.

Notes:

Do not install the GPS antenna inside the vehicle - as this will reduce reception significantly. The antenna must be mounted on a metallic surface for best performance.

Be careful not to pinch or twist the antenna cable.

Use a grommet when running wires through any metal openings.

XDVDN8190 INSTALLATION

Wiring Diagram - Optional A/V Connections

Wiring Notes:

Subwoofer output

The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier.

Center output

The CENTER audio output (Gray RCA) is only active in DVD 5.1 (6-channel) audio modes and must be connected to an external amplifier.

Rear view camera

A rear view camera (not included) can be used with the CAMERA input.

Need help?

Call our Technical Service Hotline, 1-866-382-5476.

XDVDN8190 OPERATION

To first use the IR Remote control, you must first pull the battery insulation tape out

To insert or replace the battery:

Remove the battery holder

Remove the battery from the battery holder

Install the new battery Make sure to keep the (+) side up

Insert the battery holder

IR Remote Preparation

Notes:

•Remove the battery if the remote will not be used for a month or longer

•Remove and dispose of battery properly

CAUTION!!!

•Do not store battery with metallic objects or materials

XDVDN8190 OPERATION

Control Locations - Monitor Closed

								7
18								8
18								9
								9
	17	16	15	14	13	12	11	10
1	Band				10	SD Card Slot
2	Auto Store/Preset Scan				11	Bluetooth Hands-Free Microphone
3	Secondary LCD				12	Play/Pause/Scan
4	Disc-In Indicator				13	Channel/Chapter/Track Up/Fast Forward
5	Display				14	Channel/Chapter/Track Down/Fast Reverse
6	Open/Close Monitor				15	Mute
7	Eject				16	Mode/Rear-Zone Audio On/Off
8	Rotary Encoder/Enter				17	Infrared Sensor
9	Reset				18	Power/Volume
Secondary LCD Information			1	2			3	4
Secondary LCD Information

	NOTE: Secondary LCD only functions when TFT monitor is closed.
1) LOC	LOCAL indicator, icon will be off when DISTANCE (DX) is selected
2) ST	STEREO radio station indicator
3) TIME/TRACK/CHAPTER	Displays TRACK time, TUNING frequency, MP3 ID3 info & CLOCK information.
4) LOUD	LOUDNESS selection indicator

XDVDN8190 OPERATION

Band

AS/PS

(Auto Store/Preset Scan)

Secondary LCD

Display

Disc-In Indicator

Open Monitor

Eject

Rotary Encoder/Enter

Reset

SD Card Slot

Microphone

Play/Pause/Scan

Channel/Chapter/Track Up

Fast Forward

Channel/Chapter/Track Down

Fast Reverse

Control Functions - Monitor Closed

Press BAND to increment from FM1, FM2, FM3, AM ] FM1.

Press AS/PS momentarily to start station PRESET SCAN function,

Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.

Additional LCD for system information while monitor is closed.

When the monitor is closed, press DISP to toggle display between information available for the current mode, including clock, frequency and track information.

When the monitor is open, press DISP to toggle display between the current mode and the navigation map. The navigation SD card must be inserted to use this feature.

Red = Disc inserted, Blue = No disc.

Press OPEN to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.

Pressonce to eject disc.

Rotate clockwise/counter-clockwise to select desired item, and press once to ENTER.

To resolve abnormal operation or if the unit is inoperable, press the RESET button located on the front bottom-right corner of the unit. The unit will reset the main processor (but not the default settings).

Note: Use the tip of a pen to access the reset button. To restore the factory default settings, refer to page 19.

Insert SD card to access Navigation software, MP3, WMA or JPEG files. The card will click into place when properly inserted. To remove card, press in on the card, then release to eject.

Use microphone for Bluetooth operation.

In tuner mode, press SCAN to scan all strong stations in the current band.

In disc mode, press once for PAUSE, and "PAUSE" will appear in the display. Press again to resume PLAY.

Press to select the next channel/chapter/track for playback. Press and hold to manual tune up or fast forward.

Press to select the previous channel/chapter/track for playback. Press and hold to manual tune down or fast reverse.

XDVDN8190 OPERATION

Control Functions - Monitor Closed

Mute Press MUTE to silence audio output. "MUTE" will appear in the display. Press MUTE again to restore audio at previous volume level.

Mode Press MODE to select between the unit’s available modes, including Tuner, DVD (which includes CD and MP3/WMA playback), iPod, Camera, SD, Navigation and Auxiliary inputs. Each time the MODE button is pressed the next mode is chosen. Modes of operation are indicated on the OSD. Hold the MODE button for 3 seconds to toggle the Rear-Zone audio feature on and off.

Infrared Sensor Direct the remote control towards the infrared sensor to remotely control numerous functions of the unit.

Power Press PWR momentarily to turn the unit on. Press PWR for more than 3 seconds to turn the unit off.

Volume When the monitor is in the open position, the left side rotary controls the volume, which is visible as a number from 0 to 40, to the right of the volume icon displayed on the screen. When the icon is not displayed, turn the rotary to display the volume level. Turning the rotary while the volume is muted will cancel the mute function.

Note: To program the default volume level (only up to level 20) when the unit is turned on: turn the rotary to the desired level, then push and hold the rotary for 3 seconds to program the current volume level.

Monitor OPEN Notes:

•The angle can also be manually selected via the screen setup menu.

•The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.

•The last position of the monitor can be saved in memory. When “TFT Auto

Open” is selected in the General Setup Menu, the monitor will return to its last position automatically the next time the unit is turned on.

Caution • Due to its highly technological design, the XDVDN8190 faceplate is NOT removable. Do not attempt to remove the faceplate.

•Upon installation, do not attempt to move the monitor by hand. Use the ANGLE p/q and OPEN buttons on the front panel or the remote control.

•The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.

XDVDN8190 OPERATION

Control Locations and Functions - Monitor Open

1 Band

2 AS/PS

3 Navigation

4 Close Monitor

5 Info/Picture

6 Screen Angle Up

7 Screen Angle Down

Band Press BAND to increment from FM1, FM2, FM3, AM ] FM1.

AS/PS Press AS/PS momentarily to start station PRESET SCAN function,

(Auto Store/Preset Scan) Press AS/PS for 2 seconds to start AUTO STORE station preset function in current

BAND.

Navi When the monitor is open, press NAVI to toggle display between the current mode and the navigation map. The navigation SD card must be inserted to use this feature.

Close Monitor Press CLOSE to open or close the monitor. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.

Info/Picture Press to display DVD disc information in DVD mode. Holding this button for 3 seconds brings up the Brightness setting, which can be adjusted by pressing the ANGLE p/q buttons, turning the rotary encoder or by pressing the t or u buttons on the main remote control. Note: The Brightness can not be adjusted in Bluetooth mode.

Screen Angle Up Press to adjust the angle of the screen upwards.

Screen Angle Down Press to adjust the angle of the screen downwards.

XDVDN8190 OPERATION

Control Locations - Remote

	1	2	3	4
5	6			7	8
9	10			11	12
13	14			15	16
17	18			19	20
21	22			23	24
25	26			27	28
29	30			31	32
33	34			35	36
37	38			39	40
37

1	Mode	16
2	Mute	17
3	Open/Close	18
4	Power	19
5	Key #1	20
6	Key #2	21
7	Key #3	22
8	Volume Up	23
9	Key #4	24
10	Key #5	25
11	Key #6	26
12	Volume Down	27
13	Key #7	28
14	Key #8	29
15	Key #9	30

Info	31	Root
Search	32	Repeat
Key #0	33	Chapter/Track/Seek Tune Down
Band/Stop	34	Chapter/Track/Seek Tune Up
Audio Select	35	Fast Reverse/Manual Tune Down
Escape	36	Fast Forward/Manual Tune Up
4-Way - Up	37	Zoom
Menu	38	Audio
Picture	39	Angle/Music mode (iPod only)
4-Way - Left	40	Sub-Title/Video mode (iPod only)
OK/Play/Pause
4-Way - Right
Repeat A-B

Title Menu/JPEG thumbnail view/CD Scan 4-Way - Down

* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.

			XDVDN8190 OPERATION

			Control Functions - Remote
	Mode		Press once to incrementally select desired source.
	Mode		Press once to incrementally select desired source.
	Mute		Press once to MUTE audio; press again to return audio.
	Open/Close		Press once to open monitor; press again to close the monitor.
	Power		Press once to turn the unit on, press again to turn unit off.
	Keys 0-9		Direct access chapter/track/preset station for current BAND.
	Volume Up		Increase VOLUME.
	Volume Down		Decrease VOLUME.
	Info		Displays DVD information.
	Search		Search function in the DVD mode.
	Band/Stop		Press to increment BAND or to STOP while in DVD/MP3 mode.
	Audio Select		Enter AUDIO Setup mode.
	Escape		Exit current menu.
	4-Way-Up/Down/Left/Right		Navigating system and DVD/SD/JPEG menus.
	Menu		Enter the MAIN system menu.
	Picture		BRIGHTNESS parameter setting for TFT.
	OK		Starts/pauses playback or confirms settings.
	Repeat A-B		Repeat playback from time frame A to time frame B.
	Title Menu		Enters the title menu on DVD; activates thumbnail view for JPEG.
	Root Menu		Enters the main menu of the DVD.
	Repeat		Repeats playback of current chapter/track or folder.
	Chapter/Track Down		Selects the previous chapter/track for playback.
	Chapter/Track Up		Selects the next chapter/track for playback.
	Fast Reverse		Fast reverses the disc/SD/iPod content.
	Fast Forward		Fast forwards the disc/SD/iPod content.
	Zoom		Zooming in/out on an image from DVD disc or JPEG.
	Audio		Change the audio language for DVD disc playback.
	Angle		Selects between different angles (when available) for a scene/Selects iPod
			Music mode/Rotates JPG clockwise.
	Sub-Title		Language selection for subtitle/Selects iPod Video mode.

XDVDN8190 OPERATION

General Operation

Power On/Off

Mute

Mode

Optional Mode Selection

Volume

Audio Adjustment

(from front panel)

Audio Adjustment

(from remote)

Press PWR to turn the unit on. Hold for 3 seconds to turn the unit off.

Press MUTE to silence the audio; will appear in the OSD (On Screen Display). Press MUTE again to cancel.

Press MODE to select between Tuner, Disc, iPod, Bluetooth, Camera, SD, Navigation and Auxiliary inputs. Modes of operation are indicated in the OSD (On Screen Display). iPod, and SD card (optional) must be connected/inserted to appear in the MODE selection string.

Press the top left corner of the screen to display the OSD menu bar. Press Tuner, Disc, iPod, Bluetooth, Camera, SD, Navigation or Auxiliary in the MAIN menu page to select the desired source.

Adjust VOLUME using rotary encoder or the VOL +/- buttons (00-40).

Press volume knob momentarily to enter the Audio Adjustment menu. Press volume knob momentarily to advance to desired parameter to be changed. Turn volume knob Q or P to adjust to desired level. Press volume knob to advance to next selection or press and hold to exit.

2-Channel Audio Settings

R F

L R

6-Channel Audio Settings

ltem	A djustable Range
Master Volume	00 to 40
Front Left Channel Volume	-10 to +10
Front Right Channel Volume	-10 to +10
Rear Left Channel Volume	-10 to +10
Rear Right Channel Volume	-10 to +10
Center Channel Volume	-10 to +10
Subwoofer Volume	-10 to +10

Note: 6-Channel audio is only adjustable when "Full 6CH" mode is selected. Refer to page 47 for more details.

Press the SEL button. Press the p or q buttons on the remote to select an item to be adjusted. Press  or  to adjust the desired setting. Press the ESC button on the remote control to exit the audio control menu.

Note: The Bass and Treble levels are only adjustable when EQ is set to "User” mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD is displayed in the OSD.

XDVDN8190 OPERATION

General Operation

INFO/PIC Press INFO momentarily to display DVD disc information.

Monitor Brightness Press and hold PIC for 3 seconds to change monitor BRIGHTNESS. Turn volume knob Q or P to adjust to desired level

(0 minimum/20 maximum; 10 is default).

CVBS Screen Controls While in iPod Video playback, Aux or Camera mode:

Press and hold PIC for 3 seconds to access PICTURE MENU. Press PIC momentarily to step to next selection:

PICTURE MENU
SHARPNESS	10
COLOR	10
CONTRAST	10
BRIGHTNESS	10
TINT	10

Sharpness Turn volume knob Q or P to adjust the sharpness. (0 minimum/+20 maximum).

Color Turn volume knob Q or P to adjust the color. (0 minimum/+20 maximum).

Contrast Turn volume knob Q or P to adjust the contrast. (0 minimum/+20 maximum).

Brightness Turn volume knob Q or P to adjust the brightness. (0 minimum/+20 maximum).

Tint Turn volume knob Q or P to adjust the tint. (0 minimum/+20 maximum).

Note: Adjustments to Sharpness, Color, Contrast, Brightness, or Tint are only possible while in either iPod video playback, Aux or Camera mode. A video signal must be present for adjusting the CVBS screen controls.

XDVDN8190 OPERATION

General Operation - Main Menu

Main Menu Access There are two methods to access the MAIN menu:

•Press MENU button on the remote control.

•Touch the upper left corner of the touch screen.

	1	2	3	4	5	6
	16
	15	L				7
						7
	14
	13					5
	12
	11
Touch Access Buttons	10		9		8
Touch Access Buttons

1)Touch to access AM/FM TUNER mode.

2)Touch to access NAVIGATION mode (Navigation SD card must be inserted),

3)Touch to access CD/DVD mode (CD/DVD must be inserted).

4)Touch to access CAMERA mode, if optional camera isn't connected, "No Signal Detected" will be displayed.

5)Touch to access BLUETOOTH mode (BLUETOOTH must be activated first). Refer to page 73 for more details.

6)Touch to RETURN to previous screen.

7)Touch to access iPod mode (optional iPod must be connected to activate).

8)Touch to enter STANDBY mode. Touch the screen again (or any button) to resume normal operation.

Note: VOLUME level can be controlled in STANDBY mode.

9)Touch to access AUXILIARY A/V INPUT mode.

10)Touch to access SD mode (optional SD card must be inserted).

11)Touch to access SCREEN SETUP menu.

12)Touch to access GENERAL SETUP menu.

13)Touch to access ASP Config menu.

14)Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function).

15)Touch to access REAR ZONE menu.

16)Touch to access MAIN menu.

Rapid Dial Rotary Encoder The rotary encoder on the right side can also control touch screen functions from the main menu.

•Select desired function rotating clockwise or counter-clockwise.

•Press to confirm/ENTER.

XDVDN8190 OPERATION

GENERAL Setup - Menu

	L
General Setup Menu	• Press GENERAL icon to access the GENERAL setup mode.

•Select desired parameter you wish to change.

•Page will return back to previous screen after 15 seconds of inactivity or by pressing the RETURN button.

GENERAL Setup Menu matrix - page 1

Settings	Default	Options	Function
		USA
Radio	USA	S-Amer1	Set to appropriate setting for your country
Radio	USA	S-Amer2	Set to appropriate setting for your country
		S-Amer2
		Europe
Clock adjust	AM	00:00	See adjusting the clock on page 21 for more details
Clock Mode	12Hr	12Hr	PM 6:00
		24Hr	18:00
Camera Image	Normal	Normal	Normal Image
		Reverse	Mirror camera input image 180 degrees
		Auto	System will auto detect NTSC or PAL
Video Format	Auto	NTSC	For NTSC compatibility
		PAL	For PAL compatibility
		On	TFT panel will automatically open when IGN is turned on
TFT Auto Open	Off	Off	TFT panel will not auto open when IGN is turned on
		Manual	TFT will only open/close when OPEN button is pressed

XDVDN8190 OPERATION

GENERAL Setup - Menu

General Setup Menu		• Press GENERAL icon to access the GENERAL setup mode.
		• Press PAGE icon in the lower right corner.
		• Select desired parameter you wish to change.
		• Page will return back to previous screen after 15 seconds of inactivity or
		by pressing the RETURN button.
		GENERAL Setup Menu matrix - page 2

Settings	Default	Options	Function
Bluetooth	Off	Off	Turns off the Bluetooth functionality
		On	Enables Bluetooth functionality
Anti-theft Code	0000	----	Must enter password to turn anti-theft on or off
Anti-theft active	Off	On	System will require a password if main battery power is
			removed for more then 40 seconds
		Off	No password will be required if power is removed
Load Factory	Yes	Are you	Load all factory parameters to their original settlings,
defaults		sure?	Notes: This will not reset the anti-theft password.
		Yes/Cancel	Default anti-theft password is 0000.

XDVDN8190 OPERATION

GENERAL Setup - Adjusting Radio Frequency

Adjusting Radio Frequency

Step 1

Step 2

Step 3

Touch top left corner of screen.

Touch GENERAL icon.

Touch USA.

Step 4 Touch the setting for your region.

Step 5 Touch RETURN to exit.

XDVDN8190 OPERATION

GENERAL Setup - Adjusting the Clock

12Hr Clock Mode

Step 1

Step 2

Step 3

Steps 4-8

24Hr Clock Mode

1) Touch top left corner of screen.

2) Touch GENERAL icon.

3) Touch 00:00 area in the CLOCK row.

	L L L
	8	5	6
L	8
7

4)Keypad will appear.

5)Enter HOURS, touch OK.

6)Enter MINUTES, touch OK.

7)Touch AM or PM to set.

8)Touch RETURN to exit.

For 24Hr format, select 24Hr from CLOCK MODE, then follow steps 1-8.

XDVDN8190 OPERATION

GENERAL Setup - Setting the Anti-theft code

Default Anti-theft password is 0000 and is turned off. To turn this feature on, follow the steps below. CAUTION!!

This will lock your unit from operating if battery power is disconnected for more than 5 minutes.

Step 1 & 2

Step 3 & 4

Step 5 & 6

Note: it is recommended that you choose your own 4-digit password

carefully, write it down Step 7 & 8 somewhere and keep

in a safe location. In the event you ever lose or forget your password, call our tech hot line for support on how to unlock your system.

Step 9 & 10

L
1
			L
			2
1) Touch top left corner of screen.		2) Touch GENERAL icon.
			L
	L		4
	L
		3
3) Touch down arrow icon.			4) Touch ----.

	L
	6
5
5) Enter 0000, then press OKL.	6) Touch Off.

7) Touch On.

L10

8)Touch ---- again.

9)Enter your new 4-digit password, then press OK.

10)Touch RETURN to exit.

XDVDN8190 OPERATION

SCREEN Setup - Menu

Screen Setup Menu

		L
		• Press SCREEN icon to access the SCREEN setup mode.
		• Select desired parameter you wish to change.
		• Page will return back to previous screen after 15 seconds of inactivity or by
		pressing the RETURN button.
		SCREEN Setup Menu matrix

Settings	Default	Options	Function
			Press  or  on the remote or press the right side rotary
Brightness	10	0 - 20	once and rotate clockwise/counter-clockwise to adjust the
			Brightness to the desired setting

Screen Tilt	4	1 - 6	Select 1 to 6 to adjust the default tilt angle of the screen
Screen Saver	On	Off	Select On to activate the screen saver, Off to deactivate
		On
TS Calibrate	No	No	Touch Yes to enter the Touch Screen calibration mode
		Yes
Version			Software version of unit

System Standby

To conserve the LCD backlight lifespan and eliminate glare while night driving, press STANDBY. The TFT screen will turn off (black out), however all other operations continue to operate. Press any button except VOLUME or MUTE, or touch the screen again to return to normal viewing.

XDVDN8190 OPERATION

SCREEN Setup - Setting TFT Brightness

This will set the default setting for the TFT display brightness.

This can also be set by pressing the INFO button on the front TFT panel.

Step 1

Step 2

Step 3

Step 4

Step 5

1) Touch top left corner of screen.

2) Touch SCREEN icon.

3) Touch [-] to reduce brightness.

4) Touch [+] to increase brightness.

0 - 20 is possible Default = 10

5) Touch RETURN to exit.

XDVDN8190 OPERATION

SCREEN Setup - Setting TFT Angle

Set for best viewing angle for your vehicle

Step 1

Step 2

Step 3

Step 4

Step 5

1) Touch top left corner of screen.

2) Touch SCREEN icon.

3) Touch a number displayed in SCREEN TILT row.

4) Touch desired angle for best viewing angle.

1 - 6 is possible Default = 4

5) Touch RETURN to exit.

XDVDN8190 OPERATION

SCREEN Setup - Touch Screen Calibration

Upon initial installation or occasionally, the touch screen may have to be calibrated. Follow these steps as described.

Step 1

Step 2

Step 3 & 4

1) Touch top left corner of screen.

2) Touch SCREEN icon.

L
3	L
	4

3)Touch No in TS Calibration row.

4)Then touch Yes.

Notes: For proper calibration you must touch each pointer for 2 seconds. If pointers are not touched properly, the calibration sequence will start over until the calibration is done correctly.

Step 5 & 6 5) Touch and hold the pointers as indicated on the screen for 2 seconds each. 6) Screen will automatically return to MAIN MENU, touch RETURN to exit.

XDVDN8190 OPERATION

ASP Config - Audio Settings

Notes: These settings affect the quality of the audio in "Downmix" mode only and are primarily for use by a professional installer. For the casual user, it is recommended to only adjust the general sound quality by using the Audio Setup Menu, which is accessed by pressing the SEL button on the remote or momentarily pressing the left side rotary.

Bass Freq Sets the bass center frequency for optimal bass effect.

Choices are 60, 80, 100, and 200Hz.

Treble Freq Sets the treble center frequency for optimal treble effect.

Choices are 10, 12.5, 15 and 17KHz.

Sub Filter Sets the subwoofer crossover frequency which affects the subwoofer’s low-pass filter and the “SMALL” speakers’ high-pass filter.

Choices are 80, 120 and 160Hz.

Notes: This setting has no effect when the subwoofer is set to “OFF” and/or if any other speaker is set to "LARGE".

Bass Q-Factor This setting alters the sharpness or "Q factor" of the bass output.

Choices are 1.0, 1.25, 1.5 and 2.0.

+ 64 hidden pages

	1	2	3	4
5	6			7	8
9	10			11	12
13	14			15	16
17	18			19	20
21	22			23	24
25	26			27	28
29	30			31	32
33	34			35	36
37	38			39	40
37

	1	2	3	4
5	6			7	8
9	10			11	12
13	14			15	16
17	18			19	20
21	22			23	24
25	26			27	28
29	30			31	32
33	34			35	36
37	38			39	40
37

	1	2	3	4
5	6			7	8
9	10			11	12
13	14			15	16
17	18			19	20
21	22			23	24
25	26			27	28
29	30			31	32
33	34			35	36
37	38			39	40
37