Dual XDVD8183 User Manual

0 (0)

XDVD8183

INSTALLATION/OWNER’S MANUAL

DVD Multimedia Receiver with 7” Touch Screen Display

TOUCH

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

Copyright Notes

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Collex is under license.

All other trademarks are property of their respective owners.

XDVD8183 PREPARATION

Table of Contents

Page

DVD Region Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Safety Information/Precautions  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Preparation/Mounting/Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7 Remote Control Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Control Locations - Monitor Closed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Control Locations - Monitor Open  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-12 Control Locations - Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13-14 General Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-20 General Setup Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-22 Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Anti-theft Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Screen Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25-28 AM/FM Tuner Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29-32 Warning Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 DVD Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34-42 DVD Setup  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43-49 CD Operation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-54 MP3/WMA Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55-58 Media Compatibility Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59-60 iPod Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61-66 Bluetooth Operation   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67-70 Warranty  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72-73 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

DVD Region Management

Some DVD discs can be played only in certain playback modes according to the intentions of the software. As the XDVD8183 plays discs according to their intentions, some functions may not work as intended. Please be sure to read the instructions provided with each disc. This player has been designed to play back DVD software that has been encoded for specific region areas. It cannot play back DVD software encoded for other region areas than the region areas for which it has been designed.

The XDVD8183 will play discs labeled “Region 1” or “All”.

DVD region codes:

1 - USA, Canada

2 - Japan, Europe, South Africa, Middle East

3 - Rep. of Korea, Taiwan, Hong Kong, Parts of Southeast Asia

4 - Australia, New Zealand, Mexico, South America

5 - Eastern Europe, Russia, India, Africa

6 - China

XDVD8183 PREPARATION

WARNING

Upon installation of this Monitor/DVD player (“unit”) into a vehicle, the driver of the vehicle must not operate this unit by watching videos or playing video games while driving. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

Several states prohibit the installation of monitors/DVD players if the screen is visible from the driver’s seat. If you reside in a jurisdiction which has enacted such a law, this unit must not be installed so that the screen is visible from the driver’s seat. When installing this unit in the front console/dashboard, the unit must be positioned so that it is facing the front passenger seat only. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

This unit is designed so that it may be operated only when the vehicle is in “Park” and the parking brake is fully engaged. To this end, this unit includes a parking brake lock-out feature which prohibits the unit from operating if the vehicle is not in “Park” and/or the parking brake is not fully engaged. When installing this unit, the installer must connect the parking brake detect wire (“Yellow-Blue Lead”) to the parking brake mechanism in order to make the parking brake lock-out feature operable. DO NOT simply ground the parking brake detect wire to a metal portion of the vehicle. Failure to properly install the parking brake lock-out feature could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

Once the parking brake lock-out feature is installed, the owner/user must not attempt to disrupt/neutralize the parking brake lock-out feature by (a) partially engaging the parking brake and/or (b) purchasing/using any device or unit designed to send necessary brake signals to the unit. Failure to follow these instructions could lead to driver distraction which could result in serious injury or death to the driver’s occupants or persons outside the vehicle and/or property damage.

When operating this unit, keep the unit’s volume level low enough so that the vehicle’s occupants can hear traffic-related sounds such as police and emergency vehicles. Failure to follow this instruction could lead to driver distraction which could result in serious injury or death to the vehicle’s occupants or persons outside the vehicle and/or property damage.

XDVD8183 OPERATION

Safety Information

Please read all instructions carefully before attempting to install or operate.

Due to its technical nature, it is highly recommended that your DUAL XDVD8183 is installed by a professional installer or an authorized dealer. This product is only for use in vehicles with 12VDC negative ground only.

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

To prevent damage or injury:

1.Make sure to ground the unit securely to the vehicle chassis ground.

2.Do not remove the top or bottom covers of the unit.

3.Do not install the unit in a spot exposed to direct sunlight or excessive heat or the possibility of water splashing.

4.Do not subject the unit to excessive shock.

5.When replacing a fuse, only use a new one with the prescribed rating. Using a fuse with the wrong rating may cause the unit to malfunction.

6.To prevent short circuits when replacing a fuse, disconnect the wiring harness first.

7.Use only the provided hardware and wire harness.

8.You cannot view video while the vehicle is moving. Find a safe place to park and engage the parking brake.

9.If you experience problems during installation, consult your nearest DUAL dealer.

10.If the unit malfunctions, reset the unit as described on page 12 first. If the problem still persists, consult your nearest DUAL dealer or call tech assistance @ 1-866-382-5476.

11.To clean the monitor, wipe only with a dry silicone cloth or soft cloth. Do not use a stiff cloth, or volatile solvents such as paint thinner and alcohol. They can scratch the surface of the panel and/or remove the printing.

12.When the temperature of the unit falls (as in winter), the liquid crystal inside the screen will become darker than usual. Normal brightness will return after using the monitor for a while.

Additional Notes:

1.When extending the ignition, battery or ground cables, make sure to use automotive-grade cables or other cables with an area of 0.75mm (AWG 18) or more to prevent voltage drops.

2.Do not touch the liquid crystal fluid if the LCD is damaged or broken. The liquid crystal fluid may be hazardous to your health or fatal. If the liquid crystal fluid from the LCD contacts your body or clothing, wash it off with soap immediately.

This device complies with part 15 of the FCC rules and regulations.

Operation is subject to the following two conditions:

1)This device may not cause harmful interference, and

2)This device must accept any interference received, including interference that may cause undesired operation.

XDVD8183 INSTALLATION

Preparation

Please read entire manual before installation.

Before You Start

Disconnect negative battery terminal. Consult a qualified technician for instructions.

Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

Getting Started

Slide the unit out of the mounting sleeve.

Install mounting sleeve into opening, bending tabs to secure.

Connect wiring harness and antenna as shown on pages 6-7. Consult a qualified technician if you are unsure.

Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately).

Test for correct operation and slide unit into mounting sleeve.

Attach unit to mounting sleeve using supplied #1 Phillips screws.

Snap trim ring into place.

Mount the iplug™ adapter to any smooth clean surface using the supplied double-sided tape or Phillips head screws.

Mounting sleeve opening dimensions 7-3/16” x 2-1/16” (183 mm x 53 mm)

TYPICAL FRONT-LOAD DIN MOUNTING METHOD

XDVD8183 INSTALLATION

Expanded Wiring Diagram - Inputs/Outputs

iPod not included

Wiring Notes:

Subwoofer output

The SUBWOOFER audio output (Blue RCA) is active in all audio modes and must be connected to an external amplifier.

Center output

The CENTER audio output (Gray RCA) is only active in DVD 5.1 audio mode and must be connected to an external amplifier.

Rear view camera

A rear view camera (not included) can be used with the CAMERA input.

NEED HELP??

Call our Technical Service Hotline, 1-866-382-5476.

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Altering or defeating this safety feature is a violation of law and is prohibited.

Dual XDVD8183 User Manual

XDVD8183 INSTALLATION

Wiring Diagram - Optional A/V Connections

XDVD8183 OPERATION

To first use the IR Remote control, you must first pull the battery insulation tape out

Insert or replacing the Battery:

Remove the battery holder

Remove the battery from the battery holder

Install the new battery Make sure to keep the (+) side up

Insert the battery holder

IR Remote Preparation

Notes:

Remove the battery if the remote will not be used for a month or longer

Remove and dispose of battery properly

CAUTION!!!

Do not store battery with metallic objects or materials

XDVD8183 OPERATION

Control Locations - Monitor Closed

1

2

3

4

5

6

17

16

15

14

13

12

 

11

10

9

8

7

 

1

Band

 

 

 

10

Chapter/Track Down/Seek Down

 

2

Auto Store/Preset Scan

 

11

Stop

 

 

 

 

 

3

Secondary LCD

 

 

12

Play/Pause

 

 

 

 

4

Display

 

 

 

13

Fast Forward/Manual Tune Up

 

 

5

Open/Close Monitor

 

 

14

Fast Reverse/Manual Tune Down

 

6

Eject

 

 

 

15

Mute

 

 

 

 

 

7

Rotary Encoder/Enter

 

16

Power/Volume

 

 

 

8

Mode

 

 

 

17

Microphone

 

 

 

 

9

Chapter/Track Up/Seek Up

 

 

 

 

 

 

 

Monitor Notes:

This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash, shifter or any other controls.

Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE /and OPEN buttons on the front panel only.

The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.

XDVD8183 OPERATION

BAND

AS/PS

(Auto Store /Preset Scan)

SECONDARY LCD

DISP

OPEN

EJECT

ROTARY

MODE

TRACK/SEEK UP

TRACK/SEEK DOWN

STOP

PLAY/PAUSE

FAST FORWARD/TUNE UP FAST REVERSE/TUNE DOWN MUTE

POWER ON/OFF

VOLUME

Control Functions - Monitor Closed

Press BAND to increment from FM1, FM2, FM3, AM ] FM1.

Press AS/PS momentarily to start station PRESET SCAN function,

Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.

Additional LCD for system information while monitor is closed.

Press the DISP button to display various information on the secondary LCD.

Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.

Press once to eject disc.

Rotate clockwise/counter-clockwise to select desired item and press once to

ENTER.

Press once to incrementally select desired source.

Selects the next chapter/track/radio station.

Selects the previous chapter/track/radio station.

Stop playback of DVD/CD/MP3/iPod.

Press once for PAUSE, press again for PLAY.

Fast forwards the chapter/track or selects the next radio frequency.

Fast reverses the chapter/track or selects the previous frequency.

Press once to MUTE audio, MUTE will appear in the secondary LCD. Press again to return audio.

Press POWER momentarily to turn the unit on.

Press and hold POWER for more than 2 seconds to turn the unit off. Note: EJECT will still function even if POWER is off.

Rotate clockwise/counter clockwise for desired VOLUME level.

10

XDVD8183 OPERATION

Control Locations - Monitor Open

1

2

3

4

5

1Disc-in indicator - Red = Disc inserted, Blue = No disc.

2ANGLE - Press to decrease the monitor view angle.

3ANGLE - Press to increase the monitor view angle.

4INFO - Press to select DVD INFO and press and hold for BRIGHTNESS.

5Press to RESET system.

Safety Notes:

The DVD video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion.

11

XDVD8183 OPERATION

Control Functions - Monitor Open

Disc-in indicator

Blue = No disc

 

Red = Disc inserted

Monitor Angle pq Press ANGLE p to increase the monitor view angle.

Press ANGLE q to decrease the monitor view angle.

Notes:

Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only.

The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.

The last position of the monitor will be saved in memory. The monitor will return to its last position automatically the next time it is opened.

INFO/PIC Press INFO button for 1 second to display DVD disc information.

Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS:

Press ANGLE p to increase, ANGLE q to decrease or use VOLUME rotary to adjust the level up or down, (0 minimum/20 maximum), 10 is default.

SYSTEM RESET If you experience abnormal operation or, your unit is inoperable, press the RESET button for 3 seconds, located on the front bottom-right corner of the unit. After a system reset, the unit restores all factory default settings.

Note: Use the tip of a pen to access the button.

12

XDVD8183 OPERATION

Control Locations - Remote

 

1

2

3

4

 

5

6

 

 

7

8

9

10

 

 

11

12

13

14

 

 

15

16

17

18

 

 

19

20

21

22

 

 

23

24

25

26

 

 

27

28

29

30

 

 

31

32

33

34

 

 

35

36

37

38

 

 

39

40

1

Mode

16

2

Mute

17

3

Open/Close

18

4

Power

19

5

Key #1

20

6

Key #2

21

7

Key #3

22

8

Volume Up

23

9

Key #4

24

10

Key #5

25

11

Key #6

26

12

Volume Down

27

13

Key #7

28

14

Key #8

29

15

Key #9

30

Info

31

Root

Search

32

Repeat

Key #0

33

Chapter/Track/Seek Down

Band/Stop

34

Chapter/Track/Seek Down

Audio Select

35

Fast Reverse/Manual Tune Down

Escape

36

Fast Forward/Manual Tune Up

4-Way - Up

37

Zoom

Menu

38

Audio

Picture

39

Angle/iPod Music mode

4-Way - Left

40

Sub-Title/iPod Video mode

OK

 

 

4-Way - Right

 

 

Repeat A-B

 

 

Title Menu/CD Scan

 

 

4-Way - Down

 

 

* The remote control uses one 3 volt Lithium CR2025 battery. For best performance, replace only with CR2025 or equivalent.

13

 

 

XDVD8183 OPERATION

 

 

 

 

 

Control Functions - Remote

Mode

 

Press once to incrementally select desired source.

 

Mute

 

Press once to MUTE audio, press again to return audio.

Open/Close

 

Press once to open monitor, press again to close the monitor.

Power

 

Press once to turn the unit on, press again to turn unit off.

Keys 0-9

 

Direct access chapter/track/preset station for current BAND.

Volume Up

 

Increase VOLUME.

Volume Down

 

Decrease VOLUME.

Info

 

Displays DVD information.

Search

 

Search function in the DVD/CD disc mode.

Band / Stop

 

Press to increment BAND, or STOP while in DVD/MP3 mode.

Audio Select

 

Enter AUDIO Setup mode.

Escape

 

Exit current menu.

4-Way -Up/Down/Left/Right

 

Navigating system and DVD menus.

Menu

 

Enter the MAIN system menu.

Picture

 

BRIGHTNESS parameter setting for TFT.

OK

 

Starts/pauses playback or confirm settings.

Repeat A-B

 

Repeat playback from time frame A to time frame B.

Title Menu

 

Enters the title menu on DVD.

Root

 

Enters the main menu of the DVD disc.

Repeat

 

Repeats playback of current DVD chapter.

Chapter/Track Down

 

Selects the previous chapter/track for playback.

Chapter/Track Up

 

Selects the next chapter/track for playback.

Fast Rewind

 

Fast rewinds the disc content.

Fast Forward

 

Fast forwards the disc content.

Zoom

 

Zooming in/out on an image from DVD disc.

Audio

 

Change the audio language for DVD disc playback.

Angle

 

Plays DVD disc in different angle for a scene/Selects iPod Music mode.

Sub-Title

 

Language selection for subtitle/Selects iPod Video mode.

 

 

 

14

XDVD8183 OPERATION

General Operation

Power On/Off

Monitor Open/Close

Monitor Angle Position

Press POWER momentarily to turn the unit on.

Press and hold POWER for more than 2 seconds to turn the unit off. Note: EJECT will still function even if POWER is off.

Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to touch the monitor during the open/close sequence.

Notes:

The unit will stop automatically during open/close if an obstacle is detected. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.

Audio can be heard while the monitor is closed.

Press ANGLE p to increase the monitor view angle.

Press ANGLE q to decrease the monitor view angle.

Notes:

Do not attempt to move the monitor up/down by hand - severe damage will occur. Use the front panel buttons or the remote control only.

The color of the LCD monitor varies between viewing angles. Select the angle with the most optimum view for your location.

The last position of the monitor can be saved in memory. The monitor will return to its last position automatically the next time it is opened.

Notes:

The vehicle must be in park and the parking brake applied to view video on the in-dash monitor.

As a safety feature, a blue “CAUTION” screen will show on the display when the vehicle's parking brake is not engaged. DVD and AUX IN audio can be heard while the vehicle is in motion.

The video display of the in-dash unit will not operate while the vehicle is moving. This is a safety feature to prevent driver distraction. In-dash video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Refer to local laws in your area.

See DVD operation on page 33 for more details on how to initialize the

PARKING BRAKE.

15

XDVD8183 OPERATION

General Operation

Mode Press MODE to select between TUNER, DVD, AUX IN, CAMERA and iPod inputs. Modes of operation are indicated in the OSD (On Screen Display) and secondary LCD.

iPod (optional) must be connected to appear in the MODE selection string.

Optional Mode Selection With the monitor open, press the screen to display the OSD menu bar and press TUNER, DVD, AUX IN or CAMERA in the MAIN menu page to select the desired source.

Volume Adjust VOLUME using rotary encoder or the VOL   buttons (00-40).

Mute Press MUTE to silence the audio;will appear in the OSD.

Press MUTE again to cancel.

Audio Adjustment

Press in VOLUME rotary knob on left front panel,

 

from front panel

Press in VOLUME again to advance to desired parameter to be changed,

 

Turn VOLUME rotary Q or P to adjust to desired level,

 

 

Press in VOLUME to advance to next selection,

 

 

Press and hold the VOLUME button on the front panel to exit.

 

 

 

 

 

 

2-Channel Audio Settings

6-Channel Audio Settings

 

 

 

 

 

 

 

 

 

 

 

 

ltem

A djustable Range

 

 

 

 

 

Master Volume

00 to 40

 

 

 

 

 

Front Left Channel Volume

-10 to +10

 

00

 

 

 

Front Right Channel Volume

-10 to +10

 

 

 

 

Rear Left Channel Volume

-10 to +10

 

00

 

 

 

Rear Right Channel Volume

-10 to +10

 

 

 

 

Center Channel Volume

-10 to +10

 

 

 

 

 

 

00

R

F

Subwoofer Volume

-10 to +10

 

Note: 6-Channel audio is only

 

00

L

R

 

adjustable when "Full 6CH" mode

 

00

 

 

 

is selected. Refer to page 47 for

 

 

 

 

more details.

 

Audio Adjustment

Press the SEL button,

L

 

 

 

 

 

from Remote

Press the p q buttons on the remote to select an item to be adjusted,

 

Press or to adjust the desired setting,

 

 

 

Press the ESC button on the remote control to exit the audio control menu.

Notes: The Bass and Treble levels are only adjustable when EQ is set to“User” mode. The Loud function compensates for deficiencies in sound ranges at low levels. When the Loud function is on, LOUD is displayed on the screen.

16

XDVD8183 OPERATION

General Operation

INFO/PIC

RGB BRIGHTNESS

CVBS Screen Controls

SHARPNESS

CONTRAST

COLOR

BRIGHTNESS

TINT

Note: Adjustments to SHARPNESS, CONTRAST, COLOR, BRIGHTNESS & TINT are only possible while in either iPod video playback, AUX-IN or CAMERA CVBS mode.

Press INFO button for 1 second to display DVD disc information.

Press and hold INFO for 2 seconds to change TFT LCD BRIGHTNESS:

Press ANGLE p to increase, ANGLE q to decrease, or use VOLUME rotary to adjust the level up or down. (0 minimum/20 maximum) 10 is default.

While in iPod Video playback, AUX-IN or CAMERA mode:

Press and hold INFO for 2 seconds to access PICTURE MENU, press INFO briefly again to step to next selection:

 

 

 

 

 

PICTURE MENU

 

 

 

SHARPNESS

10

 

 

COLOR

10

 

 

CONTRAST

10

 

 

BRIGHTNESS

10

 

 

TINT

10

 

 

 

 

 

 

 

 

 

L

Press q or p to adjust the sharpness (0 minimum/+20 maximum).

Press q or p to adjust the contrast (0 minimum/+20 maximum).

Press q or p to adjust the color (0 minimum/+20 maximum).

Press q or p to adjust the brightness (0 minimum/+20 maximum).

Press q or p to adjust the tint (0 minimum/+20 maximum).

17

XDVD8183 OPERATION

General Operation

BAND Press BAND to increment from FM1, FM2, FM3, AM ] FM1.

AS/PS Press AS/PS momentarily to start station PRESET SCAN function. The unit (Auto Store /Preset Scan) will now scan your program presets for 10 seconds for each preset in that

band. Press AS/PS again to stop scanning. Press AS/PS for 2 seconds to start AUTO STORE station preset function in current BAND.

DISP Press the DISP button to display various information on the secondary LCD screen when the monitor is closed.

OPEN Press OPEN to open or close the monitor. The unit will emit a confirmation beep when opening and closing. Be careful not to not touch or obstruct the monitor movement during the open/close sequence, or permanent damage could occur.

EJECT Press once for DISC ejection.

ROTARY Press to access MAIN menu, rotate clockwise/counter-clockwise to select desired item and press once to ENTER.

MODE Press once to incrementally select desired source.

TRACK/SEEK UP Selects the next chapter/track/radio station.

TRACK/SEEK DOWN Selects the previous chapter/track/radio station.

STOP Stop playback of DVD/CD/MP3/iPod.

PLAY/PAUSE Press once for PAUSE, press again for PLAY.

FAST FORWARD/TUNE UP Fast forwards the chapter/track or selects the next radio frequency.

FAST REVERSE/TUNE DOWN Fast reverses the chapter/track or selects the previous frequency.

MUTE Press once to MUTE audio, press again to return audio, an icon indicator will flash on the TFT monitor.

POWER ON/OFF Press POWER momentarily to turn the unit on.

Press and hold POWER for more than 2 seconds to turn the unit off. Note: EJECT will still function even if POWER is off.

VOLUME Rotate VOLUME rotary knob Q or P for desired VOLUME level, press once to access the AUDIO SETUP MENU.

PROGRAMMABLE TURN-ON Turn VOLUME rotary to desired listening level, press and hold VOLUME VOLUME rotary knob for 3 seconds to program currently selected volume level.

18

XDVD8183 OPERATION

General Operation

Secondary LCD Information

1

2

3

4

 

NOTE: Secondary LCD only functions when TFT monitor is closed.

1) LOC

LOCAL indicator, icon will be off when DISTANCE (DX) is selected

2) ST

STEREO radio station indicator

3) TIME

Displays TRACK time, TUNING frequency, MP3 ID3 info, & CLOCK, etc

4) LOUD

LOUDNESS selection indicator

19

XDVD8183 OPERATION

General Operation

Main Menu Access There are three methods to access the MAIN menu:

Press the ENTER button on the right ROTARY knob.

Press the MENU button on the remote control.

Touch the upper left corner of the touch screen.

1

2

3

4

12

L

10

11

 

9

 

8

7

6

5

Touch Access Buttons

1)Touch to access AM/FM TUNER mode.

2)Touch to access CD/DVD mode, CD/DVD must be inserted.

3)Touch to access iPod mode, iPod must be connected to activate.

4)Touch to RETURN to previous screen.

5)Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first.) Refer to page 67 for more details.

6)Touch to access CAMERA mode, if optional camera isn't connected then "No Signal Detected" will be displayed.

7)Touch to STANDBY screen, touch screen again or any button to resume display. Note: VOLUME level can be controlled in STANDBY mode.

8)Touch to access AUXILIARY A/V INPUT mode .

9)Touch to access SCREEN SETUP menu.

10)Touch to access GENERAL SETUP menu.

11)Touch to access CD/DVD SETUP menu, CD/DVD must be inserted to function Touch to access MAIN Source menu.

Rapid Dial Rotary Encoder The rotary encoder can also control touch screen functions from the main menu.

Select desired function rotating clockwise or counter-clockwise.

Function will be outlined in yellow.

Press to confirm/ENTER.

20

XDVD8183 OPERATION

GENERAL Setup - Menu

General Setup Menu

L

Press the GENERAL button to access the GENERAL setup mode.

Select desired parameter you wish to change.

Page will return back to previous screen after 10 seconds of inactivity or Note: by pressing the RETURN button.

Default anti-theft password

is 0000 GENERAL Setup Menu matrix

Settings

Default

Options

Function

 

 

 

 

 

 

USA

 

 

 

 

 

Radio

USA

S-Amer1

Set to appropriate setting for your country

 

S-Amer2

 

 

 

 

 

Europe

 

 

 

 

 

Clock adjust

AM

00:00

See adjusting the clock on page 23 for more details

 

 

 

 

Clock Mode

12Hr

12Hr

PM 6:00

 

 

 

 

 

 

24Hr

18:00

Camera Image

Normal

Normal

Normal Image

 

 

 

 

 

 

Reverse

Mirror camera input image 180 degrees

 

 

 

 

 

 

Auto

System will auto detect NTSC or PAL

Video Format

Auto

 

 

NTSC

For NTSC compatibility

 

 

 

 

 

 

 

 

PAL

For PAL compatibility

 

 

 

 

 

 

On

TFT panel will automatically open when IGN is turned on

TFT Auto Open

Off

 

 

Off

TFT panel will not auto open when IGN is turned on

 

 

 

 

Manual

TFT will only open/close when OPEN button is pressed

 

 

 

 

Bluetooth

Off

Off

Turns off the Bluetooth functionality

 

 

On

Enables Bluetooth functionality

 

 

 

 

Anti-theft Code

0000

----

Must enter password to turn anti-theft on or off

Anti-theft active

Off

On

System will require a password if main battery power is removed for

 

 

 

more than 40 seconds

 

 

 

 

 

 

Off

No password will be required if power is removed

 

 

 

 

Load Factory

Yes

Are you sure?

Load all factory parameters to their original settlings, Notes: This will

defaults

 

Yes/Cancel

not reset the anti-theft password. Default anti-theft password is 0000.

Note: Not all GENERAL setup features are described in detail.

21

XDVD8183 OPERATION

GENERAL Setup - Adjusting Radio Frequency

Adjusting Radio Frequency

Step 1

Step 2

Step 3

Step 4

L1

1) Touch top left corner of screen.

L2

2) Touch GENERAL icon.

L3

3) Touch USA.

L5

L4

4) Touch the setting for your region.

Step 5 Touch RETURN to exit.

22

Loading...
+ 53 hidden pages