Dixon ZTR 5424, ZTR 5020 User Manual

4.5 (2)
Dixon ZTR 5424, ZTR 5020 User Manual

IMPORTANT: READ CAREFULLY

The Dixon® ZTR® Mower is both easy and fun to operate. However, any power mower must be operated properly to be safe.

It is not a toy or a recreational vehicle.

Before you start to use the mower: read the operator's manual carefully, and become completely familiar with the controls.

The information in this operator's manual applies to all

Dixon® ZTR®Series Mowers.

Your Dixon dealer will gladly provide a check-out ride, and answer any questions.

See your dealer for warranty service, parts and repairs.

DIXON INDUSTRIES, INC.

A BLOUNT International Inc. Co. PO BOX 1569

COFFEYVILLE KS 67337 0945 3162512000

INDEX

SAFETY..............................................................

Pages

1 -

6

WARRANTY POLICY .........................................

Page

 

7

SPECIFICATIONS ..............................................

Page

8-

9

SEAT ADJUSTMENT..........................................

Page

 

10

CONTROLS........................................................

Pages 11 -14

OPERATION INSTRUCTIONS............................

Pages 15-22

CARE AND MAINTENANCE ...............................

Pages 23-37

STANDARD SERVICE PARTS LIST ...................

Page

38 - 39

TROUBLESHOOTING ........................................

Pages 40 - 43

Part No. 5749

January 1998

mn1/98 MY98

RIDING LAWNMOWERS, IF IMPROPERLY OPERATED, CAN CAUSE SERIOUS INJURY OR DEATH

The most common causes of injury to the operator or bystander..

Page 2

read and understand this manual to prevent injuries.

SAFETY SYMBOLS:

SAFETY ALERT SYMBOL -

When you see this symbol,

BE ALERT to the potential for injury.

Follow recommended safety precautions and safe operating practices.

Danger indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

Warning indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Caution indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

Page 3

This cutting mower is capable of amputating hands and feet, and throwing objects. Failure to observe the following safety instructions could result in

serious injury or death.

GENERAL OPERATION:

Read, understand, and follow all instructions in the manual and on the mower before starting.

Only allow responsible adults, who are familiar with the instructions, to operate the mower.

Clear the area of objects such as rocks, toys, wire, etc., which could be picked up and thrown by the blade.

Be sure the area is clear of other people before mowing. Stop mower if anyone enters the area.

Never carry passengers.

Do not mow in reverse unless absolutely necessary. Always look down and behind before and while backing.

Be aware of the mower discharge direction and do not point it at anyone. Do not operate the mower without either the entire grass catcher or the deflector in place.

Slow down before turning.

Never leave a running mower unattended. Always turn off blades, set parking brake, stop engine, and remove key before dismounting.

Turn off blades when not mowing.

Stop engine before removing grass catcher or unclogging chute.

Mow only in daylight or good artificial light.

Do not operate the mower while under the influence of alcohol or drugs.

Watch for traffic when operating near or crossing roadways.

Use extra care when loading or unloading the mower into a trailer or truck. Do not ride the mower when loading & unloading.

The Engine Exhaust from this product contains chemicals known to the

State of California to cause cancer, birth defects or other reproductive harm.

Page 4

SLOPE OPERATION:

Slopes are a major factor related to loss-of-control and tip-over accidents, which can result in severe injury or death.

All slopes require extra caution.

If you cannot back up the slope or if you feel uneasy on it, do not mow it.

DO

Mow across the slope with your Dixon ZTR - never up or down.

Remove obstacles such as rocks, tree limbs, etc.

Watch for holes, ruts or bumps. Uneven terrain could overturn the mower. Tall grass can hide obstacles.

Use slow speed.

Use extra care with grass catchers or other attachments. These can change the stability of the mower.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction.

Avoid starting or stopping on a slope. If tires lose traction, disengage the blades and proceed slowly down the slope.

DO NOT

Do not turn on slopes unless necessary, and then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches, or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding. Do

not try to stabilize the mower by putting your foot on the ground. Do

not use grass catcher on steep slopes.

Page 5

CHILDREN:

Tragic accidents can occur if the operator is not alert to the presence of children.

Children are attracted to lawn mowers and the mowing activity. NEVER assume children will stay where they were last seen.

Be alert to avoid accidents.

Keep children out of the mowing area and under the watchful care of another responsible adult.

Be alert and turn mower off if a child enters the area.

Before and during backing, look behind and DOWN for small children.

Never carry children. They may fall off and be seriously injured or interfere with safe mower operation.

Never allow children to operate the mower.

Use extra care when approaching blind corners, shrubs, trees, or other objects that may obscure vision.

Page 6

SERVICE:

DRINK/CUP HOLDER located on left rear fender is for transporting or carrying ONLY! Mower usage requires that both hands be free to control individual levers. DO NOT attempt operation of mower with any type of container or other object in either hand.

Use extra care in handling gasoline and other fuels. They are flammable and vapors are explosive.

Use only an approved container.

Never remove gas cap or add fuel with the engine running. Allow engine to cool before refueling. Do not smoke.

Never refuel the mower indoors.

Never store the mower or fuel container inside a building where there is an open flame.

Never run a mower inside a closed area.

Keep nuts and bolts, especially blade attachment bolts, tight and keep equipment in good condition.

Never tamper with safety devices. Check their proper operation regularly.

Keep mower free of grass, leaves, or other debris buildup. Clean up oil or fuel spillage. Allow mower to cool before storing.

Stop and inspect the equipment if you strike an object. Repair, if necessary, before restarting.

Never make adjustments or repairs with the engine running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check components and replace with original equipment parts, when necessary.

Mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Batteries contain sulfuric acid. To prevent burns avoid contact with skin, eyes and clothing. To prevent a fire or explosion keep sparks and open flames away from battery.

Before disconnecting the negative (-) ground cable, make sure all switches are OFF.

Check to assure that the drive chains are properly adjusted. A loose chain may come off causing loss of control. This statement applies to chain drive models 2301, 3000 & 4000

Series.

. . . . . . .

Page 7

DIXON LIMITED WARRANTY POLICY -- ESTATE MODELS

This warranty policy applies to all Estate Mowers purchased on or after September 1, 1997.

WARRANTY: Commercial Applications: Dixon Estate Models used in any commercial application are warranted for a period of six (6) months from date of purchase. Commercial applications or use is defined as any use other than at owners primary place of residence. Home Owner Applications: Dixon Estate Models used primarily at the owner's place of residence are warranted for a period of two (2) years from date of purchase. DIXON ZTR MOWERS ARE WARRANTED AGAINST DEFECTS IN MATERIALS AND WORKMANSHIP AND PROVIDES FOR REPLACEMENT OR REPAIR OF PARTS INCLUDING LABOR COSTS. THIS WARRANTY IS SUBJECT TO THE FOLLOWING CONDITIONS AND LIMITATIONS:

1 . Warranty applies only to original retail purchaser of new and unused mowers and accessories.

2.All Dixon warranty must be accomplished by authorized Dixon dealers and in accordance with Dixon warranty policy and allowances. All warranty claims must be approved by Dixon Industries, Inc.

3.Battery warranty: Limited to 90 days from date of purchase.

4.Accessories Warranty (Grass Catchers, Snow Blades, Tine Rakes, Covers, etc.): Limited to 90 days from date of purchase.

5.Warranty does not apply to damage in transit or incidents of misuse, negligence, accidents, or alteration. The use of parts or components other than those supplied by Dixon Industries, Inc. VOIDS ALL WARRANTY.

6. The following items are not covered by this warranty policy: (a) Pick up and delivery charges for transportation of mower to and from an Authorized Dixon Dealer's place of business, (b) Routine maintenance or adjustments, (c) Belts / cutting blades / HydroGear Filters, (d) Engines - All engines used on Dixon ZTR mowers are warranted by each individual engine manufacturer, (e) Any costs or expense of providing substitute equipment while repair work is being performed on a warranted mower.

7. There is no other express warranty. Implied warranties, including those of merchantability and fitness for a particular purpose, are limited to the same duration of the express warranty, and to the extent permitted by law any and all implied warranties are excluded. Liabilities for consequential damages under any and all warranties are excluded.

WARRANTY VALIDATION: At the time of sale, selling dealer must review each portion of this warranty document, complete the information section below, secure customer's signature and send copy to Dixon Industries, Inc.

DATE OF PURCHASE

 

Mod

S/N DM-

 

 

e

 

 

 

 

 

 

 

 

(Owner's Name)

 

 

 

(Dealership)

 

 

 

 

 

 

 

 

(Address)

 

 

 

 

(Address)

 

 

 

 

 

 

 

 

 

 

 

 

 

(Dealer's Signature)

 

 

 

 

 

 

 

 

(Owner's Signature)

 

 

 

 

 

 

 

 

 

 

SEE DEALER FOR DETAILS

 

Page 8

 

 

 

 

 

 

CHASSIS:

BODY:

SEAT:

MOWER DECK:

BLADE DRIVE: DRIVE SYSTEM:

ENGINE:

STARTING SYSTEM:

TIRES:

RECOMMENDED TIRE PRESSURE:

CAPACITIES:

DIMENSIONS:

NOTE:

SPECIFICATIONS

Model ZTR 5424

11 GA - rectangular tube

Two piece - made of rotational molded polyethylene. Front body contains access panels for battery service and engine to mower deck belt removal. Rear body tilts up to allow service on the entire drive system.

Designed for operator comfort by use of high density closed cell foam padded back and arm rests, upholstered with Cordura™ water-repellent fabric. Seat is adjustable fore and aft.

1 3 GA stamped steel construction 3 blades combine for a 42" cut width Cut height approximately 1 .5" to 4.5" via 7 position lift handle

Electric clutch

Each rear wheel is independently driven by a HydroGear BDU-10L Series 70 hydrostatic transmission. The hydrostatic transmissions, in turn, power a fully enclosed HydroGear gearbox.

17HP Briggs & Stratton Intek, overhead valves, replaceable oil filter, dual element air cleaner, impulse fuel pump

Electric by key switch operation with safety interlocks on parking brake and blade drive clutch.

Front

11 X 4 X 5 smooth profile

Rear

18 X 9.5 X 8 Multi Trac CS

Front

16-21 Ibs. Rear

8- 14 Ibs.

,

 

 

\'

Fuel - 4.8 gallons total (dual tanks) Hydrostat oil tank - 3 quart with in-line 10 micron filter Hydrostat oil recommendation, refer to page 37 Engine - 2 qts. SAE 30 (with filter)

Width

54"

Height

45"

Length

72"

Weight

61 5 Ibs.

Additional information provided in service instructions underthe individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Page 9

CHASSIS:

BODY:

SEAT:

MOWER DECK:

BLADE DRIVE: DRIVE SYSTEM:

ENGINE:

STARTING SYSTEM:

TIRES:

RECOMMENDED TIRE PRESSURE:

CAPACITIES:

DIMENSIONS:

NOTE:

Page 10

SPECIFICATIONS

Model ZTR 5020

11 GA - rectangular tube

Two piece - made of rotational molded polyethylene. Front body contains access panels for battery service and engine to mower deck belt removal. Rear body tilts up to allow service on the entire drive system.

Designed for operator comfort by use of high density closed cell foam padded back rest and arm rests, upholstered with Cordura™ water-repellent fabric. Seat is adjustable fore and aft.

3 Decks are available. 42" & 60" are made of stamped steel. 50" is made of 1 1 GA fabricated welded construction with external reinforcement ribs 3 blades combine for either a 42", 50", or 60" cut width Cut height approximately 1 .5" to 4.5" via 8 position lift handle

Electric clutch

Each rear wheel is independently driven by a HydroGear BDU-10L Series 70 hydrostatic transmission. The hydrostatic transmissions, in turn, power a fully enclosed HydroGear gearbox.

20HP Briggs & Stratton Intek, overhead valves, replaceable oil filter, full pressure lube system, dual element air cleaner, integral fuel pump.

Electric by key switch operation with safety interlocks on parking brake and blade drive clutch.

Front

11 X 4 X 5 smooth profile

Rear

20 X 1 0.5 X 8 Multi Trac

Front

16-21

Ibs.

Rear

8- 14

Ibs.

Fuel - 4.8 gallons total (dual tanks)

Hydrostat oil tank - 3 quart with in-line 10 micron filter Hydrostat oil recommendation, refer to page 37 , Engine - 2 qts. SAE 30 (with filter)

Width

54"(42" Deck), 60"(50" Deck), 73"(60"Deck)

Height

45"

Length

72"

Weight

630 lbs.(42" Deck), 668 Ibs. (50" Deck), 685 Ibs. (60" Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

SEAT ADJUSTMENT INSTRUCTIONS

Models ZTR 5424 - ZTR 5020:

1.Place parking brake in ON position. (Pull brake lever up)

2.Raise and push seat assembly and upper body rearward.

3.Loosen two front seat adjustment knobs, P/N 3978, and slide seat forward or backward to desired position.

4.Re-tighten front seat adjustment knobs, P/N 3978.

DO NOT operate mower without seat adjustments properly tightened.

5.Carefully lower upper body and seat assembly to the closed position.

Page 11

Page 12

CONTROLS

PARKING BRAKE:

The parking brake used on the Estate Series

Models is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion.

Engage parking brake before starting engine.

Do not leave engine running for extended periods of time without the parking brake engaged. Damage to the drive system could result.

TO SET PARKING BRAKE:

The hand operated parking brake is located at left hand side of mower.

To engage brake, pull lever up and to the rear. To release brake,

move lever forward and down.

NOTE: Always set parking brake before dismounting. Release

parking brake before moving mower.

HYDRO-GEAR DRIVE SYSTEM:

Allows the mower to turn on its own axis (zero turning radius).

Drive levers control braking, turning, travel speed and direction. Each lever controls one side of the mower.

NOTE: The pressure required to operate the mower is very light.

A minimum of 1/2 hour should be spent simply driving the mower without the blade drive engaged.

Page 13

Loading...
+ 33 hidden pages