Owner’s Manual
Model
DF2608
NBDF2608
DF2622SS
DF2622BLK
IMPORTANT SAFETY INFORMATION: Always read this manual first before attempting to install or use this fireplace. For your safety, always comply with all warnings and safety instructions contained in this manual to prevent personal injury or property damage.
To view the full line of Dimplex products, please visit
www.dimplex.com
7208680100R06
Table of Contents
Welcome & Congratulations. . . . . . . . . 3
Important Instructions . . . . . . . . 4
Fireplace Installation . . . . . . . . . . . . 7
Operation. . . . . . . . . . . . . . . . 11
Maintenance. . . . . . . . . . . . . . .13
Warranty . . . . . . . . . . . . . . . . 17
Replacement Parts. . . . . . . . . . . . .20
Always use a qualified technician or service agency to repair
this stove.
!NOTE: Procedures and techniques that are considered important enough to emphasize.
CAUTION: Procedures and techniques which, if not carefully followed, will result in damage to the equipment.
Warning: Procedures and techniques which, if not carefully followed, will expose the user to the risk of fire, serious injury, or death.
2 |
www.dimplex.com |
Welcome & Congratulations
Thank you and congratulations for choosing to purchase an electric fireplace from Dimplex, the world leader in electric fireplaces.
Please carefully read and save these instructions.
CAUTION: Read all instructions and warnings carefully before starting installation. Failure to follow these instructions may result in a possible electric shock, fire hazard and will void the warranty.
Please record your model and serial numbers below for future reference: model and serial numbers can be found on the Model and Serial Number Label of your fireplace.
Model Number
Serial Number
NO NEED TO RETURN TO THE STORE
Questions with operation or assembly? Require Parts Information?
Product Under Manufacturer’s Warranty?
Contact us at: www.dimplex.com/customer_support
For Troubleshooting and Technical Support
OR Toll-Free 1-888-DIMPLEX (1-888-346-7539)
Monday to Friday 8:00 a.m. to 4:30 p.m. EST
Please have your model number and product serial number ready. (See above)
3
Important Instructions
Read all instructions before using the electric fireplace.
This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. The trim around the heater outlet becomes hot during heater operation.
Extreme caution is necessary when any heater is used by or near children or invalids and whenever the
unit is left operating and unattended.
Young children should be supervised to ensure that they do not play with the appliance.
The appliance is not intended for use by young children or infirmed persons without supervision.
The appliance must be positioned so that the plug is accessible.
Always unplug the electric fireplace when not in use.
If the supply cord is damaged, it must be replaced by the
manufacturer, or its service agent, or a qualified person in order to avoid a hazard.
Do not operate any unit with a damaged cord or plug, or if the heater has malfunctioned, or if the
electric fireplace has been dropped or damaged in any manner. Contact Dimplex Technical Service 1-888-346- 7539.
Do not use outdoors.
Never locate fireplace where it may fall into a bathtub or other water container.
Do not install the fireplace directly on carpet or a similar surface which may restrict air circulation beneath
the unit.
Do not run the cord under carpeting. Do not cover cord with throw rugs, runners, or the like. Arrange cord away from traffic area
and where it will not be tripped over.
Do not locate the heater immediately below a fixed socket-
outlet.
To disconnect the fireplace, turn the controls off, then remove the plug from the outlet.
4 |
www.dimplex.com |
Important Instructions
Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage to
the heater.
Although this unit is of zero clearance design, to prevent a possible fire, do not block air intake or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
All electrical heaters have hot and arcing or sparking parts inside. Do not use in areas where gasoline, paint, or flammable liquids are used or stored or where the unit will be exposed to
flammable vapors.
Do not modify the electric fireplace. Use it only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons.
Avoid the use of an extension cord. Extension cords may overheat and cause a risk of fire. If you must use an extension cord, the cord shall be No. 14 AWG minimum size and rated not less then 1875 Watts.
Do not burn wood or other materials in the electric fireplace.
Do not strike the fireplace glass.
Always use a certified electrician should new circuits or outlets be required
Always use properly grounded, fused and polarized outlets.
Disconnect all power supply before performing any cleaning, maintenance or relocation of the unit.
When transporting or storing the unit and cord, keep in a dry place, free from excessive vibration and store so as to avoid damage.
SAVE THESE Instructions
5
Important Instructions
! NOTE: This equipment has been tested and found to comply with
the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and the receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: (1) this device may not cause interference and; (2) this device must accept any interference, including interference that may cause undesired operation of the device.
6 |
www.dimplex.com |
Loading...