Digital Watchdog Vmax IP DW-VIP1612T, Vmax IP DW-VIP84T, Vmax IP DW-VIP88T, Vmax IP DW-VIP86T, Vmax IP DW-VIP83T, Vmax IP DW-VIP82T, Vmax IP DW-VIP81T, Vmax IP DW-VIP812T, Vmax IP DW-VIP166T, Vmax IP DW-VIP168T, Vmax IP DW-VIP164T, Vmax IP DW-VIP163T, Vmax IP DW-VIP161T, Vmax IP DW-VIP162T, DW-VIP166T User Manual

Loading...

Quick Start Guide

8 Channel Models

16 Channel Models

 

 

DW-VIP81T

DW-VIP161T

 

 

DW-VIP82T

DW-VIP162T

 

 

DW-VIP83T

DW-VIP163T

DW-VIP84T

DW-VIP164T

 

 

DW-VIP86T

DW-VIP166T

 

 

DW-VIP88T

DW-VIP168T

 

 

DW-VIP812T

DW-VIP1612T

 

 

 

 

Username: admin

 

Password: no password

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WHAT’S IN THE BOX

 

 

 

CD (QSG + Manual

 

 

 

 

 

 

12V/5A D/C Adaptor

 

 

 

 

 

 

 

 

 

 

 

 

+ Software) & Quick

 

 

 

 

1 Set

 

 

 

1 Set

 

 

 

 

 

& Power Cable

 

 

Start Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Rubber Mount

 

 

 

 

1 Set

 

48V/2.5A PoE Adaptor

 

 

1 Set

 

 

 

 

 

& Power Cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

USB Mouse

 

 

 

 

1 Set

 

IR Remote Control

 

 

1 Set

 

 

 

 

 

 

 

 

 

 

 

Attention: This document is intended to serve as a quick reference page for initial set-up.

It is recommended that the user read the entire instruction manual for complete and proper NVR usage.

Tel: 866-446-3595 / 813-888-9555

digital-watchdog.com

Technical Support Hours: 9:00AM – 8:00PM EST, Monday thru Friday

 

Quick Start Guide

Step 1 – CONNECTING THE NVR

Step 2 – POWERING UP THE NVR

1.

Mount and install all necessary cameras and external devices. Refer to their individual manuals for

1.

When the NVR boots up, it will be in protective mode.

 

additional information.

 

This means you will not be able to access the NVR’s setup

2.

Place the NVR in its final position. See installation tips below.

 

menu until you enter the proper username and password.

 

 

 

 

 

 

 

 

 

 

 

 

 

3.

Connect all necessary cables to the NVR

2.

To unlock the NVR, right-click anywhere on the screen.

 

The login screen will appear. (Default Username /

4.

Once all additional devices have been properly connected to the NVR, connect the NVR to

 

Password: admin / no password)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

an appropriate power supply. The NVR will boot up automatically.

3.

When the NVR boots up for the first time, you will be

 

 

 

 

 

 

 

 

 

guided through the Startup Wizard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

HD MONITOR

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAMERA

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN POWER

5A max

 

 

KBD PTZ RELAY ALARM IN

48V 2.5A max

SUPPLY

 

PoE POWER INPUT

(MAX 12V, 5A)

+ – + – C NC NO G 4 3 2 1

POE POWER

 

 

Back Panel Ports may differ according to model

SAFETY TIPS

1.Make sure the cameras and the monitors are properly connected to the NVR.

2.The NVR should be placed in a dust and moisture free environment. It must never be directly exposed to sunlight. Server room temperature is highly recommended to reduce the chance of overheating, which may cause the NVR to become unstable.

3.During the boot up process, the NVR should not be interrupted by pressing any buttons on the mouse. Do not unplug the power adapter or turn the NVR off during the boot up process.

4.A UPS (Uninterrupted Power Supply) is highly recommended to prevent damage to the NVR during a power outage.

5.Local PoE Ports can support up to 15W and up to 2.1 Megapixel resolution cameras.

PTZ CAMERA

ALARM

AUDIO IN/OUT

USB MOUSE NETWORK PORT

CONTROL

INPUT/OUTPUT

 

 

+ 1 hidden pages