DCD734
DCD771
DCD776
Dansk (oversat fra original brugsvejledning) |
3 |
Deutsch (übersetzt von den Originalanweisungen) |
17 |
English (original instructions) |
32 |
Español (traducido de las instrucciones originales) |
45 |
Français (traduction de la notice d’instructions originale) |
60 |
Italiano (tradotto dalle istruzioni originali) |
74 |
Nederlands (vertaald vanuit de originele instructies) |
88 |
Norsk (oversatt fra de originale instruksjonene) |
103 |
Português (traduzido das instruções originais) |
116 |
Suomi (käännetty alkuperäisestä käyttöohjeesta) |
131 |
Svenska (översatt från de ursprungliga instruktionerna) |
143 |
Türkçe (orijinal talimatlardan çevrilmiştir) |
156 |
Ελληνικά (μετάφραση από τις πρωτότυπες οδηγίες) |
170 |
Copyright DEWALT
2
Figure 1
d
c
f
e |
|
b |
i |
|
|
|
a |
DCD771
h
g |
j |
|
|
|
|
|
|
|
|
|
|
|
|
|
Figure 2
g
h
k
1
Figure 3
i
Figure 4 |
Figure 5 |
Figure 6 |
DCD776
c |
c |
Figure 7 |
Figure 8 |
Figure 9 |
f
2
ENGLISH
CORDLESS COMPACT 13 mm (1/2") DRILL/DRIVER/ HAMMERDRILL
DCD734, DCD771, DCD776
Congratulations!
You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users.
Technical Data
|
|
|
DCD734 |
DCD771 |
DCD776 |
|
|
|
|
|
|
Voltage |
VDC |
14.4 |
18 |
18 |
|
Type |
|
1/10 |
1/10 |
1/10 |
|
Battery Type |
|
Li-Ion |
Li-Ion |
Li-Ion |
|
Power output |
W |
250 |
300 |
300 |
|
No-load speed |
|
|
|
|
|
|
1st gear |
min-1 |
0–400 |
0–450 |
0–450 |
|
2nd gear |
min-1 |
0–1300 |
0–1500 |
0–1500 |
Impact rate |
|
|
|
|
|
|
1st gear |
min-1 |
– |
– |
0–7650 |
|
2nd gear |
min-1 |
– |
– |
0–25,500 |
Max. torque |
|
|
|
|
|
(hard/soft) |
Nm |
38/22 |
42/24 |
42/24 |
|
Chuck capacity |
mm |
1.5–13 |
1.5–13 |
1.5–13 |
|
Maximum drilling |
|
|
|
|
|
capacity |
|
|
|
|
|
|
Wood |
mm |
30 |
30 |
30 |
|
Metal |
mm |
10 |
13 |
13 |
|
Masonry |
mm |
– |
– |
13 |
Weight (without |
|
|
|
|
|
battery pack) |
kg |
1.20 |
1.28 |
1.34 |
|
|
|
|
|
|
|
LPA |
(sound pressure) |
dB(A) |
69 |
72 |
85 |
KPA |
(sound pressure |
|
|
|
|
|
uncertainty) |
dB(A) |
3 |
3 |
3 |
LWA (sound power) |
dB(A) |
80 |
83 |
96 |
|
KWA (sound power |
|
|
|
|
|
|
uncertainty) |
dB(A) |
3 |
3 |
3 |
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value ah
Drilling into metal |
|
|
|
|
ah,D = |
m/s² |
< 2.5 |
< 2.5 |
< 2.5 |
Uncertainty K = |
m/s² |
1.5 |
1.5 |
1.5 |
Vibration emission value ah
Screwdriving |
|
|
|
|
ah,ID = |
m/s² |
< 2.5 |
< 2.5 |
< 2.5 |
Uncertainty K = |
m/s² |
1.5 |
1.5 |
1.5 |
Vibration emission value ah |
|
|
|
|
Drilling into concrete |
|
|
|
|
ah,D = |
m/s² |
– |
– |
14.0 |
Uncertainty K = |
m/s² |
– |
– |
2.4 |
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns.
32
|
|
|
|
|
|
ENGLISH |
|
|
|
|
|
|
|
Battery pack |
|
DCB140 |
DCB141 |
DCB142 |
DCB143 |
DCB145 |
|
|
|
|
|
|
|
Battery type |
|
Li-Ion |
Li-Ion |
Li-Ion |
Li-Ion |
Li-Ion |
Voltage |
VDC |
14.4 |
14.4 |
14.4 |
14.4 |
14.4 |
Capacity |
Ah |
3.0 |
1.5 |
4.0 |
2.0 |
1.3 |
Weight |
kg |
0.53 |
0.30 |
0.54 |
0.30 |
0.30 |
Battery pack |
|
DCB180 |
DCB181 |
DCB182 |
DCB183 |
DCB185 |
|
|
|
|
|
|
|
Battery type |
|
Li-Ion |
Li-Ion |
Li-Ion |
Li-Ion |
Li-Ion |
Voltage |
VDC |
18 |
18 |
18 |
18 |
18 |
Capacity |
Ah |
3.0 |
1.5 |
4.0 |
2.0 |
1.3 |
Weight |
kg |
0.64 |
0.35 |
0.61 |
0.40 |
0.35 |
|
|
|
|
|
|
|
Chargers |
|
|
|
DCB106 / DCB107 |
|
|
|
|
|
|
|
|
|
Mains voltage |
VAC |
|
|
230 V |
|
|
Battery type |
|
|
|
Li-Ion |
|
|
Approx. charging time |
min |
60 |
70 |
90 |
140 |
180 |
|
|
(1.3 Ah battery |
(1.5 Ah battery |
(2.0 Ah battery |
(3.0 Ah battery |
(4.0 Ah battery |
|
|
packs) |
packs) |
packs) |
packs) |
packs) |
Weight |
kg |
|
|
0.49 |
|
|
Fuses
Europe |
230 V tools |
10 Amperes, mains |
U.K. & Ireland |
230 V tools |
3 Amperes, in plugs |
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DRILL/DRIVER/HAMMERDRILL
DCD734, DCD771, DCD776
DEWALT declares that these products described under Technical Data are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-1,
EN 60745-2-2.
These products also comply with Directive 2004/108/EC and 2011/65/EU. For more information, please contact DEWALT at the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical file and makes this declaration on behalf of DEWALT.
Horst Grossmann
Vice President Engineering DEWALT, Richard-Klinger-Straße 11, D-65510, Idstein, Germany
15.01.2014
33