Denon DNS-1000 User Manual

TABLE TOP SINGLE CD PLAYER /

DN-S1000

	OPERATING INSTRUCTIONS	INSTRUCCIONES DE OPERACION
	BEDIENUNGSANLEITUNG	GEBRUIKSAANWIJZING
	MODE D’EMPLOI	BRUKSANVISNING
	ISTRUZIONI PER L’USO

POWER ON

TITLE

B

FLIP

A1

A2

EXIT/

CLR

A

MEMO

RELOOP

EXT TR.

PRESET

/B TRIM

QUICK JUMP

TIME

CONT.

/SINGLE

TRACK SEARCH

TAP

/LOOP

FILTER

DISC MODE

ON

BEND

DRAG-S

0

BRAKE

RVS

CUE

CUE/STUTTER

					PITCH/KEY
				DISC EJECT		RANGE
	PLAY/PAUSE							PITCH BEND

FOR ENGLISH READERS		PAGE	116	~ PAGE	120
FÜR DEUTSCHE LESER		SEITE	121	~ SEITE	135
POUR LES LECTEURS FRANCAIS		PAGE	136	~ PAGE	150
PER IL LETTORE ITALIANO		PAGINA	151	~ PAGINA	165
PARA LECTORES DE ESPAÑOL		PAGINA	166	~ PAGINA 180
VOOR NEDERLANDSTALIGE LEZERS PAGINA			181	~ PAGINA	195
FOR SVENSKA LÄSARE		SIDA	196	~ SIDA	110
		111		~ 126

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

1.Handle the power supply cord carefully

Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.

2.Do not open the tp cover

In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer.

3.Do not place anything inside

Do not place metal objects or spill liquid inside the CD player. Electric shock or malfunction may result.

Please, record and retain the Model name and serial number of your set shown on the rating label.

Model No. DN-S1000 Serial No.

NOTE:

This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 °C (41 °F) –35 °C (95 °F).

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

,,CLASS 1

LASER PRODUCT,,

ADVARSEL:

USYNLIG LASERSTRÅLING VED ÅBNING, NÅR SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION. UNDGÅ UDSAETTELSE FOR STRÅLING.

VAROITUS!

LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.

VARNING–

OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.

LABELS (for U.S.A. model only)

CERTIFICATION

THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

FCC INFORMATION (For US customers)

1.PRODUCT

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.

2.IMPORTANT NOTICE:

DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.

3.NOTE

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the product into an outlet on a circuit different from that to which the receiver is connected.

•Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.

SAFETY INSTRUCTIONS

1.Read Instructions – All the safety and operating instructions should be read before the product is operated.

2.Retain Instructions – The safety and operating instructions should be retained for future reference.

3.Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4.Follow Instructions – All operating and use instructions should be followed.

5.Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

6.Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7.Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8.Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory

recommended by the manufacturer.

9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12.Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL

ELECTRICAL CODE ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

13.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

15.Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A.

16.Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

17.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

18.Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

20.Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

21.Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a)When the power-supply cord or plug is damaged,

b)If liquid has been spilled, or objects have fallen into the product,

c)If the product has been exposed to rain or water,

d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

e)If the product has been dropped or damaged in any way, and

f)When the product exhibits a distinct change in performance – this indicates a need for service.

22.Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23.Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

24.Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

25.Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

2

ENGLISH

DEUTSCH FRANÇAIS

ITALIANO

ESPAÑOL NEDERLANDS SVENSKA

TOP PANEL DIAGRAM / OBERES BEDIENFELD-SCHEMA / SCHEMA DU PANNEAU SUPERIEUR / SCHEMA PANNEAU SUPERIEUR DIAGRAMA DEL PANEL SUPERIOR / OVERZICHT VAN BOVENPANEEL / BILD ÖVER ÖVERSTA PANELEN /

POWER

ON

OFF

!5

TITLE

MEMO

!7

PRESET

!6

TIME

CONT.

@2

/SINGLE

@1

ECHO

TAP

@0

/LOOP

AUTO

!9

FILTER

!8

DISC MODE

ON : SCRATCH

OFF :

BEND

#2

DRAG-S

#1

BRAKE

#0

RVS

iCUE

u CUE/STUTTER

y

PLAY/PAUSE	DISC EJECT

!4 !0!1 !1 !2 !3

FLIP

A1

A2

B

EXIT/

CLR

A

RELOOP

@4

PARAMETERS

NEXT TR.

PUSH

/B TRIM

QUICK JUMP

@5

FAST SEARCH

@3

TRACK SEARCH

MP3 SEARCH MODE

@8

PITCH/KEY	@6
RANGE				@7
	PITCH BEND

o @9

3

FRONT PANEL DIAGRAM / VORDERES BEDIENFELD-SCHEMA /

SCHEMA DU PANNEAU AVANT / SCHEMA PANNEAU AVANT / DIAGRAMA DEL PANEL FRONTAL / OVERZICHT VAN VOORPANEEL / FRONTPANELEN /

NOTE ON USE / HINWEISE ZUM GEBRAUCH /

OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA

q

REAR PANEL DIAGRAM / HINTERES ANSCHLUSSFELD-SCHEMA /

SCHEMA DU PANNEAU ARRIERE / SCHEMA PANNEAU ARRIERE / DIAGRAMA DEL PANEL POSTERIOR / OVERZICHT VAN ACHTERPANEEL / BAKPANELEN /

DIGITAL OUT

L

R

LINE OUT

FADER

t e r

R

MODEL NO.

DN-S1000

POWER

ON

OFF

MODELE NO.

120V

15W

60Hz

NO.

Z

Y

X

W

V

U

T

S

R

Q

P

O

N

M

L

K

J

I

H

G

F

E

D

C

B

A

w

•Avoid high temperatures.

Allow for sufficient heat dispersion when installed on a rack.

•Vermeiden Sie hohe Temperaturen. Beachten Sie, daß eine ausreichend Luftzirkulation gewährleistet wird, wenn das Gerät auf ein Regal gestellt wird.

•Eviter des températures élevées

Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.

•Evitate di esporre l’unità a temperature alte. Assicuratevi che ci sia un’adeguata dispersione del calore quando installate l’unità in un mobile per componenti audio.

•Evite altas temperaturas

Permite la suficiente dispersión del calor cuando está instalado en la consola.

•Vermijd hoge temperaturen.

Zorg voor een degelijk hitteafvoer indien het apparaat op een rek wordt geplaatst.

•Undvik höga temperaturer.

Se till att det finns möjlighet till god värmeavledning vid montering i ett rack.

•Handle the power cord carefully.

Hold the plug when unplugging the cord.

•Gehen Sie vorsichtig mit dem Netzkabel um. Halten Sie das Kabel am Stecker, wenn Sie den Stecker herausziehen.

•Manipuler le cordon d’alimentation avec précaution.

Tenir la prise lors du débranchement du cordon.

•Manneggiate il filo di alimentazione con cura. Agite per la spina quando scollegate il cavo dalla presa.

•Maneje el cordón de energía con cuidado. Sostenga el enchufe cuando desconecte el cordón de energía.

•Hanteer het netsnoer voorzichtig.

Houd het snoer bij de stekker vast wanneer deze moet worden aanof losgekoppeld.

•Hantera nätkabeln varsamt.

Håll i kabeln när den kopplas från el-uttaget.

•Keep the set free from moisture, water, and dust.

•Halten Sie das Gerät von Feuchtigkeit, Wasser und Staub fern.

•Protéger l’appareil contre l’humidité, l’eau et lapoussière.

•Tenete l’unità lontana dall’umidità, dall’acqua e dalla polvere.

•Mantenga el equipo libre de humedad, agua y polvo.

•Laat geen vochtigheid, water of stof in het apparaat binnendringen.

•Utsätt inte apparaten för fukt, vatten och damm.

•Unplug the power cord when not using the set for long periods of time.

•Wenn das Gerät eine längere Zeit nicht verwendet werden soll, trennen Sie das Netzkabel vom Netzstecker.

•Débrancher le cordon d’alimentation lorsque l’appareil n’est pas utilisé pendant de longues périodes.

•Disinnestate il filo di alimentazione quando avete l’intenzione di non usare il filo di alimentazione per un lungo periodo di tempo.

•Desconecte el cordón de energía cuando no utilice el equipo por mucho tiempo.

•Neem altijd het netsnoer uit het stopkontakt wanneer het apparaat gedurende een lange periode niet wordt gebruikt.

•Koppla ur nätkabeln om apparaten inte kommer att användas i lång tid.

*(For sets with ventilation holes)

•Do not obstruct the ventilation holes.

•Die Belüftungsöffnungen dürfen nicht verdeckt werden.

•Ne pas obstruer les trous d’aération.

•Non coprite i fori di ventilazione.

•No obstruya los orificios de ventilación.

•De ventilatieopeningen mogen niet worden beblokkeerd.

•Täpp inte till ventilationsöppningarna.

•Do not let foreign objects in the set.

•Keine fremden Gegenstände in das Gerät kommen lassen.

•Ne pas laisser des objets étrangers dans l’appareil.

•E’ importante che nessun oggetto è inserito all’interno dell’unità.

•No deje objetos extraños dentro del equipo.

•Laat geen vreemde voorwerpen in dit apparaat vallen.

•Se till att främmande föremål inte tränger in i apparaten.

•Do not let insecticides, benzene, and thinner come in contact with the set.

•Lassen Sie das Gerät nicht mit Insektiziden, Benzin oder Verdünnungsmitteln in Berührung kommen.

•Ne pas mettre en contact des insecticides, du benzène et un diluant avec l’appareil.

•Assicuratevvi che l’unità non venga in contatto con insetticidi, benzolo o solventi.

•No permita el contacto de insecticidas, gasolina y diluyentes con el equipo.

•Laat geen insektenverdelgende middelen, benzine of verfverdunner met dit apparaat in kontakt komen.

•Se till att inte insektsmedel på spraybruk, bensen och thinner kommer i kontakt med apparatens hölje.

•Never disassemble or modify the set in any way.

•Versuchen Sie niemals das Gerät auseinander zu nehmen oder auf jegliche Art zu verändern.

•Ne jamais démonter ou modifier l’appareil d’une manière ou d’une autre.

•Non smontate mai, nè modificate l’unità in nessun modo.

•Nunca desarme o modifique el equipo de ninguna manera.

•Nooit dit apparaat demonteren of op andere wijze modifiëren.

•Ta inte isär apparaten och försök inte bygga om den.

CAUTION	• Please be care the environmental aspects of battery
• The ventilation should not be impeded by covering the	disposal.
ventilation openings with items, such as newspapers,	• The apparatus shall not be exposed to dripping or
table-cloths, curtains, etc.	splashing for use.
• No naked flame sources, such as lighted candles, should	• No objects filled with liquids, such as vases, shall be
be placed on the apparatus.	placed on the apparatus.

4

•DECLARATION OF CONFORMITY

We declare under our sole responsibility that this product, to which this declaration relates, is in conformity with the following standards:

EN60065, EN55013, EN55020, EN61000-3-2 and EN61000- 3-3.

Following the provisions of 73/23/EEC, 89/336/EEC and 93/68/EEC Directive.

•ÜBEREINSTIMMUNGSERKLÄRUNG

Wir erklären unter unserer Verantwortung, daß dieses Produkt, auf das sich diese Erklärung bezieht, den folgenden Standards entspricht:

EN60065, EN55013, EN55020, EN61000-3-2 und EN61000- 3-3.

Entspricht den Verordnungen der Direktive 73/23/EEC, 89/336/EEC und 93/68/EEC.

•DECLARATION DE CONFORMITE

Nous déclarons sous notre seule responsabilité que l’appareil, auquel se réfère cette déclaration, est conforme aux standards suivants:

EN60065, EN55013, EN55020, EN61000-3-2 et EN61000- 3-3.

D’après les dispositions de la Directive 73/23/EEC, 89/336/EEC et 93/68/EEC.

•DICHIARAZIONE DI CONFORMITÀ

Dichiariamo sotto nostra responsabilità che questo prodotto, al quale si riferisce la presente dichiarazione, è conforme ai seguenti standard:

EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3- 3.

In base alle disposizioni delle direttive 73/23/CEE, 89/336/CEE e 93/68/CEE.

•DECLARACIÓN DE CONFORMIDAD

Declaramos bajo nuestra exclusiva responsabilidad que este producto al que hace referencia esta declaración, está conforme con los siguientes estándares:

EN60065, EN55013, EN55020, EN61000-3-2 y EN61000- 3-3.

Siguiendo las provisiones de las Directivas 73/23/EEC, 89/336/EEC y 93/68/EEC.

•EENVORMIGHEIDSVERKLARING

Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt, waarop deze verklaring betrekking heeft, in overeenstemming is met de volgende normen:

EN60065, EN55013, EN55020, EN61000-3-2 en EN61000-3-3.

Volgens de bepalingen van de Richtlijnen 73/23/EEC, 89/336/EEC en 93/68/EEC.

•ÖVERENSSTÄMMELSESINTYG

Härmed intygas helt på eget ansvar att denna produkt, vilken detta intyg avser, uppfyller följande standarder: EN60065, EN55013, EN55020, EN61000-3-2 och EN61000-3-3.

Enligt stadgarna i direktiv 73/23/EEC, 89/336/EEC och 93/68/EEC.

•Use compact discs that include the mark.

CD’s with special shapes (heart-shaped CD’s, octagonal CD’s etc.) cannot be played on this set. Attempting to do so may damage the set. Do not use such CD’s.

•Benutzen Sie Compact Discs, die das Zeichen tragen.

Speziell geformte CD’s (herzförmige CDs, achteckige CDs, usw.) können auf dieser Anlage nicht abgespielt werden.

Der Versuch derartige CDs abzuspielen kann die Anlage beschädigen. Verzichten Sie auf die Benutzung solcher CDs.

•Utiliser des disques compacts portant le logo .

Des CD avec des formes spéciales (CD en forme de coeur, des CD octogonaux, etc.) ne peuvent pas être lus sur cet appareil.

Le fait de l’essayer, risque d’endommager le lecteur. Ne pas utiliser de tels CD.

•Utilizzare compact disc contrassegnati con .

Non è possibile eseguire in questa unità CD con forme speciali (CD a forma di cuore, ottagonali, ecc.), poiché possono danneggiare il prodotto. Non utilizzare tali CD.

•Use discos compactos con la marca .

En este equipo no es posible reproducir CDs con formas especiales (CDs con forma de corazón, CDs octagonales, etc.).

Si intenta hacerlo, el equipo podrá resultar dañado. No use este tipo de CDs.

•Gebruik compact discs voorzien van het logo .

CD’s met speciale vormen (bijv. CD’s in de vorm van een hart, achthoekige CD’s, enz.) kunnen met dit toestel niet worden afgespeeld.

Wanneer u dit toch probeert, zal u het toestel beschadigen. Speel dergelijke CD’s dus niet af.

•Använd CD-skivor med -märket.

Specialformade CD-skivor (hjärtformade, åttkantiga, m m) går inte att spela på den här apparaten. Utrustningen kan skadas om du försöker göra detta. Använd inte CD-skivor av denna typ.

ENGLISH

	Residue
	Rückstand
	Résidu
	Residuo
	Residuos
	Oneffenheid
Disc	Plastrester

•The disc may not play normally if there is residue along the edges of the center hole.

•When using new discs in particular, use a pen, etc., to remove the residue.

•Die Disk kann nicht normal abgespielt werden, wenn sich ein Rückstand entlang der Mittellochenden befindet.

•Insbesondere, wenn Sie neue Disks benutzen, dann entfernen Sie mit einem Stift, etc. den Rückstand.

•Le disque peut ne pas être lu normalements s’il y a un résidu le long des bord du trou central.

•Lors de l’utilisation de nouveaux disques en particulier, utiliser un stylo à bille, etc., pour enlever le résidu.

•Il disco non viene eseguito in modo corretto se sono presenti residuo ai bordi del foro centrale.

•Quando si utilizzano dischi nuovi, utilizzare una penna o uno strumento simile, per rimuovere i residui.

•El disco no puede ser reproducido normalmente debido a la terminación deficiente de los bordes del agujero central.

•Para quitar estos residuos de material, especialmente cuando vaya a re-producir discos nuevos, utilice un bolígrafo, o algo similar.

•Het is mogelijk dat de disc niet normaal wordt weergegeven als de randen van het middengat van de schijf oneffenheden vertonen.

•Verwijder vooral bij gebruik van nieuwe discs de oneffenheden met een pen of iets dergelijks.

•Det kan uppstå fel vid CD-avspelningen om det finns plastrester kvar i mitthålet.

•Tänk på att bort dessa med en penna, e d, särskilt om CD-skivan är ny.

• FOR CANADA MODEL ONLY	• POUR LES MODELE CANADIENS
	UNIQUEMENT

CAUTION		ATTENTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE		POUR ÉVITER LES CHOCS ÉLECTRIQUES,
OF PLUG TO WIDE SLOT, FULLY INSERT.		INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE
		DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
		POUSSER JUSQU’ AU FOND.

CAUTION:

DO NOT USE THE DENON AMC-22 CD PICK-UP LENS CLEANER FOR THIS PRODUCT.

THIS MIGHT DAMAGE THE LASER PICK-UP OF THIS PRODUCT.

ACHTUNG:

VERWENDEN SIE NICHT DEN CD-ABTAST-LINSENREINIGER DENON AMC-22 FÜR DIESES PRODUKT. SOLLTEN SIE DIES NICHT BEACHTEN, KÖNNTE DER LASERABTASTKOPF DIESES PRODUKTES BESCHÄDIGT WERDEN.

ATTENTION :

N’UTILISEZ PAS LE NETTOYEUR DE CAPTEUR D’OBJECTIF CD DENON AMC-22 POUR CE PRODUIT. CECI POURRAIT ENDOMMAGER LE CAPTEUR LASER DE CD DE CE PRODUIT.

AVVERTENZA:

NON UTILIZZARE L’UNITÀ DI PULITURA DELLE LENTI DEI CD DENON AMC-22 PER QUESTO PRODOTTO, POICHÉ POTREBBE DANNEGGIARE IL DISPOSITIVO LASE DEL PRODOTTO.

PRECAUCIÓN:

NO UTILICE EL LIMPIADOR DE OBJETIVO DEL DETECTOR DE CD DEL DENON AMC-22 PARA ESTE PRODUCTO.

ESTO PUEDE DAÑAR EL DETECTOR LASER DE ESTE PRODUCTO.

OPGELET:

GEBRUIK DE PICK-UPLENSREINIGER VAN DE DENON AMC-22 NIET VOOR DIT PRODUCT. DIT KAN DE LASER PICK-UP VAN DIT PRODUCT BESCHADIGEN.

FÖRSIKTIGT:

ANVÄND INTE LINSAVPUTSAREN FÖR DENON AMC-22:NS CD-PICKUP FÖR DENNA PRODUKT. DET KAN SKADA PRODUKTENS LASERPICKUP.

5

ENGLISH

– TABLE OF CONTENTS –

z Main features .....................................................	6
x Connections/Installation .....................................	7
c Part names and functions ..........................	8 ~ 10
v Compact discs ..................................................	10
b Basic operation .................................................	11
n Next Track ........................................................	12
m Scratch..............................................................	12
, Seamless loop/Hot start/Stutter .......................	13
. B trim................................................................	14
⁄0Auto BPM Counter/Effector .......................	14, 15

⁄1MP3 playback ...................................................	16
⁄2Platter effect.....................................................	17
⁄3Memo (Custom setting memory).....................	18
⁄4Preset ...............................................................	19
⁄5Specifications ...................................................	20

•ACCESSORIES

Check that the following parts are included in addition to the main unit:

q Operating instructions .....................................	1
w Connection cords for signal output (RCA) .......	1

1 MAIN FEATURES

Congratulations on your new purchase of the DNS1000. The DN-S1000 table top single CD player is equipped with a variety of advanced features, functions and rich performance for unlimited creativeness and showmanship.

Features and Functions

With the implementation of a powerful DSP and large memory capacity allows for many new controlling features such as:

1.SCRATCH

The jog dial construction consists of clear scratch disc, felt slipmat and slip sheet to ensure the same feeling and performance as found in an analog turntable.

2.MP3 PLAY BACK

It is possible to play MP3 files created in the specified format found on page 16.

Files can be searched for easily either manually, or by scanning or using a number of file search functions (File search, File/Folder search, Artist name search, Title name search, File name search).

3.NEXT TRACK RESERVE

The next track can be selected while continuing to play the current track for a seamless transition.

4.CROSS FADE

In conjunction with the Next Track feature, the DN-S1000 can perform a smooth internal cross fade when transitioning to the new track.

5.HOT START and STUTTER

The Hot Start function lets you start playback immediately from a set point decided by you. Up to two points can be set using the A1 and A2 buttons. The loaded Hot Starts can also be used to “Stutter” those same points. When in Stutter mode, momentary audio is triggered according to the length of time of which these buttons are held down and released.

6.SEAMLESS LOOP

With this function, any section on a disc can be played repeatedly between A & B points with no break in sound or limit in length. The DN-S1000 has a variety of looping options such as Exit, Reloop and dual looping.

7.B TRIM

The B points for the Seamless Loop can easily be adjusted using the Scratch Disc. Adjustments can be made in real-time while playing the live loop.

8.AUTO BPM COUNTER, BPM LOCK, MANUAL TAP, and MANUAL BPM INPUT

In addition to the Auto BPM counter and Manual Tap function, the DN-S1000 is also equipped with a Lock function for temporarily locking the Auto BPM counter. A Manual BPM Input function is available too for inputting the known BPM value directly by a Rotary knob, so the BPM setting can be made easily.

9.ON BOARD EFFECT’S

Six types of effectors are included. ECHO/LOOP:The ECHO and LOOP functions

can be selected. Looping for the feedback time (ECHO LOOP) is possible by setting the feedback number to “MAX”.

FLANGER:The feedback time and feedback gain can be selected.

FILTER: One of three filters (LOW PASS, MID PASS and HIGH PASS) can be selected and Individually adjusted.

10.PLATTER MODE

Analog turntable-like playback can be simulated using three Platter effects.

DRAG START: Simulates the dragging sound of a turntable’s slow starting up from a stop mode. (Start-up time can be adjusted.)

BRAKE: Simulates a winding-down sound of a turntable coming to a full stop slowly. (Slowing-down time can be adjusted.)

RVS: (Reverse) Plays the sound backwards until you return to normal play.

11.MEMO

Various settings such as Cue Point, Hot Start, A- B Loop, Pitch and Key Adjust can be saved to the internal non-volatile memory for later recall. Up to 1000 points are available.

12.PITCH/KEY ADJUST

PITCH: Playback speed is adjusted with PITCH slider. Adjustable pitch ranges are +/– 4, 10, 16, 24, 100% (selectable live).

KEY ADJUST: Keeps the original key even if the pitch playing speed is changed with the PITCH slider.

13.DIGITAL OUT

The digital output for Main provides a true 100% digital signal without any restrictions or limitations regardless of pitch change or mode setting.

14.FADER START

The DN-S1000 FADER START controls are compatible with our DN-X300 or DN-X100 mixers.

15.SHOCKPROOF MEMORY

20 seconds of shock-proof memory guards against audible interruptions due to external mechanical shocks such as bumps or other hard vibrations, which is especially helpful for the mobile DJ as well as for nightclub-installed applications.

16.PRESETS

It is possible to customise the machine to your preference by saving your favourite setting to internal memory. For items found in the presets, please see page 19.

17.CD TEXT

18.CD-R/RW Play Back

This player can play CD-R/RW discs, but only if they are finalized. Note however that depending on the recording quality, the player may not be able to play some finalized CD-R/RW discs.

19.Power on Play

The player can be set so that playback in the relay mode starts when the power is turned on.

20.Scratch Stroke

This unigue feature found in the presetmode allows the user to select a comfortable stroke distance for scratching “Long” is set for wide pattern strokes and “Short” is set for small pattern strokes.

6

ENGLISH

2 CONNECTIONS/INSTALLATION

(1) CONNECTIONS

1.	Turn off the POWER switch.
2.	Connect the RCA pin cords between the DN-S1000 outputs and inputs of your mixer.
3.	If your mixer has Fader Start function such as our DENON DN-X100 or DN-X300, connect FADER 1, 2 jacks to	DN-X100	DN-S1000
	the mixer using 3.5 mm stereo mini cord.

DN-X100

L	LINE
RL	OUT

LINE2

FADER

PGM 1

DN-X300

L	LINE
RL	OUT

POWER	ON OFF
TITLE
						A1	A2	B
		FLIP
						A		EXIT/
MEMO			CLR
	NEXT TR.							RELOOP
PRESET								QUICK JUMP
TIME	/B TRIM
CONT.
/SINGLE								FAST SEARCH

TRACK SEARCH

MP3 SEARCH MODE

TAP	ECHO
	/LOOP
DIGITAL OUT	FLANGER

AUTO

FILTER

					R					DISC MODE
			MODEL NO.					POWER	ON
		L	MODELE NO.				DN-S1000			OFF
			120V			15W	60Hz			ON :
										:
L			NO.							BEND
		R					GEN-6335-1
			Z Y X W V U T S R Q P O N
L	LINE OUT	FADER								DRAG-S	0
R			M L K	J	I	H G F E D C B A

MADE IN JAPAN FABRIQUE AU JAPON

BRAKE

FADER

	DIGITAL OUT
					R
			MODEL NO.				DN-S1000	POWER	ON	OFF
	L		MODELE NO.
			120V			15W	60Hz
L			NO.
	R						GEN-6335-1
L			Z Y X W V U T S R Q P O N
R	LINE OUT	FADER	M L K	J	I	H G F E D C B A

MADE IN JAPAN FABRIQUE AU JAPON

RVS

CUE

CUE/STUTTER

		PITCH/KEY
	DISC EJECT	RANGE
PLAY/PAUSE		PITCH BEND

	LINE2	FADER	FADER	DN-X300	DN-S1000
		PGM 1

(2) INSTALLATION

Please set up DN-S1000 horizontally.

MAX 20°

Front

POWER

ON OFF

TITLE

A1

A2

B

FLIP

A

EXIT/

MEMO

CLR

NEXT TR.

RELOOP

PRESET

QUICK JUMP

TIME

/B TRIM

CONT.

/SINGLE

FAST SEARCH

TRACK SEARCH

ECHO

MP3 SEARCH MODE

TAP

/LOOP

AUTO

FLANGER

FILTER

DISC MODE

ON :

:

BEND

DRAG-S

0

BRAKE

RVS

CUE

CUE/STUTTER

		PITCH/KEY
	DISC EJECT	RANGE
PLAY/PAUSE		PITCH BEND

7

ENGLISH

3 PART NAMES AND FUNCTIONS

(1) Front panel

qDisc loading slot

•Load the disc slowly, and release it once the DN-S1000 starts grabbing the disc in.

NOTE:

Please clean the dirt of the label side of a disc and start loading of the disc.

The dirt causes a slip of a disc loader roller.

CAUTIONS:

•Do not load discs when the power is turned off.

•Do not try to forcibly remove a disc once the DN-S1000 has started to grab the disc.

•Do not load more than once disc at a time or insert anything other than discs.

Otherwise loading mechanism may be damaged.

(2) Rear panel

wPOWER button (¢ON £OFF)

• Push this button to turn power on and off.

CAUTION:

•Do not turn off the power while a disc is loading or being ejected. Otherwise loading mechanism may be damaged.

eAnalog output jacks (LINE OUT)

•This is unbalanced RCA output jacks.

•Audio signals outputs.

rFader start jack

•Use this when your mixer has Fader Start function with 3.5 mm stereo mini cord.

tDigital output jack

•Digital data is available from this jack.

•Use 75 Ω/ohms pin cord for connection.

•We recommend you use braided wire type shielded cable.

NOTE: The playback level after analog conversion is set to –6dB below the usual level to avoid digital distortion.

(3) Top panel

CAUTION:

•Note that there are many buttons working two different function selected by short time pushing or long pushing (1 second or more). The mark indicates short time push function and mark indicates long time push function.

yPLAY/PAUSE button (13)

•This button will start or pause playback.

•Push once to start playback, once again to pause playback, and once more to resume playback.

uDISC EJECT button

•Push this button to eject the disc.

•The disc will not eject during playback. Stop playback before pushing this button.

iCUE button

•Pushing this button in play mode will force the track back to the position which playback started. While in search mode, it makes new Cue point. (Cue)

•In Cue mode, by pushing the CUE button makes a Stutter sound from the Cue point. This is called Stutter play. (Stutter)

o Scratch Disc

Use this vinyl scratch disc for scan, manual search, Pitch Bend and Scratch operations.

!0FLIP/CLR button

•FLIP:

Use this to select operating mode of A1 and A2 buttons, from Hot Start mode and Stutter mode. The display will indicate “H/S” or “STR”

•A1, A2 CLR:

If the A1 or A2 button is pushed while pushing the FLIP button, you can clear the selected A point.

By holding down just the FLIP button for more than 1 sec, you can clear A1 and A2 points all at once.

!1A1, A2 button

•Using this button you can create starting point for Hot Start, Seamless Loop and Stutter.

!2B button

•Use this to set the B point to create a Seamless Loop after the A point has been set.

!3EXIT/RELOOP button

•Use this to exit or return back again to Seamless loop playback. You can add variety to looping with this function.

!4NEXT TR./B TRIM button

•When the button is pressed during playback, the NEXT TRACK MODE is selected. If the button is pressed again, the B TRIM MODE is selected.

In the standby and pause modes, only the B TRIM MODE can be selected.

!5TITLE button

•CD TEXT:

When there is CD text data, the CD text data is displayed automatically or when the button is pressed.

If no TEXT is available, the display will indicate “No TEXT”.

•MP3:

When an MP3 file has ID-3 tag data, the title, artist name and album name are selected and displayed each time the button is pressed.

!6 TIME, CONT./SINGLE button

•TIME:

A short push will displays mode changes between ELAPSED TIME and REMAIN TIME.

•4-way TOTAL TIME display mode can be selected by PRESET(8).

•At this time, you can select display mode from four modes, TRACK ELAPSED, TRACK REMAIN, DISC ELAPSED and DISC REMAIN.

•CONT./SINGLE:

Long pushing play ending mode between CONT. (continue: play more tracks) and SINGLE (stop playing and ReCUE’s back to your set point).

•SINGLE PLAY LOCK:

When SINGLE PLAY LOCK is selected, track selection during playback is disabled. This prevents playback from stopping when the Track Select Knob is turned accidentally during playback. Play ending mode is the same as single mode.

!7 MEMO, PRESET button

•MEMO:

The memo mode starts when this button is pushed once in the Cue mode.

•PRESET:

When this button is pushed for more than 1 sec, the PRESET mode menu is displayed. The machine status must be in, CUE, PAUSE or No Disc mode before entering the preset mode.

8

!8DISC MODE button

Select from Scratch playback, Bend mode or Manual Frame Search mode.

•SCRATCH:

This button lights up or blinks in orange when scratching. Manipulate the sound by pushing down on the disc.

•BEND/SEARCH:

When the Disc mode is set to BEND during playback, it alternates as the pitch bend function. The display will indicate “Bend”. When Disc mode is set to Search, during Pause or CUE mode, it alternates as the Manual Search function. Manual search allows you to move the CUE point around by one frame at a time (1/75 second) with an audible frame-repeat sound. The display will indicate “Search”.

!9FILTER button

•One of three filters (LOW PASS, MID PASS and HIGH PASS) can be selected.

@2ECHO/LOOP button

•The ECHO and LOOP functions can be selected. The feedback time and feedback ratio can be selected. Looping for the feedback time (ECHO LOOP) is possible by setting the feedback number to “MAX”.

@3TRACK/PARAMETERS knob

•TRACK:

When PARAMETERS LED is on, turn this knob to select tracks.

By pushing this knob down while turning, the tracks will change by 10 tracks at a time.

•PARAMETERS:

When the PARAMETER LED is flashing, turn this knob to select and change the parameter for items found in the Platter effects, Memo, and Preset data, etc.

•FILE SEARCH MODE:MP3 DISC only.

When pushing this knob for more than 1 second, the file search selection mode is selected.

@0FLANGER button

•The feedback time and feedback gain can be selected.

@1TAP, LOCK, AUTO, INPUT BPM

button

•TAP:

When you push this button repeatedly, the Auto mode turns off and starts measuring your Beats Per Minute (BPM) by tapping.

•LOCK:

When this button is pressed once while the auto BPM counter is operating, the data measured by the auto BPM counter is locked.

•AUTO:

When pushing the TAP button for 1 second, activates AUTO BPM mode.

The measured BPM is displayed in the character section of the display.

•INPUT BPM:

When the TAP button is pressed and held in for more than 2 seconds, the BPM input mode is set and the BPM value can be input directly with the PARAMETERS knob. When the tap button is pressed again, the BPM input mode

is turned off and set.

NOTE:

If you select a new track, AUTO BPM mode turns on automatically.

@4FAST SEARCH (6)

QUICK JUMP button

@5FAST SEARCH (7)

QUICK JUMP button

•QUICK JUMP:

When one of these buttons is tapped shortly, the playback position jumps approximately 10 seconds in the forward (7) or reverse (6) direction. The jump time can be changed in the preset mode.

•FAST SEARCH:

When one of these buttons is pressed and held in, the disc is fast-searched in the forward (7) or reverse (6) direction.

@6PITCH BEND – button

@7PITCH BEND + button

•Pushing these buttons will change main playing speed temporarily.

•While pushing PITCH BEND + button, the playing speed increases and speed decreases while pushing PITCH BEND – button.

•When release button, playing speed returns to the previous speed.

ENGLISH

@8Pitch Slider

•Use this slider to adjust playing speed.

•The playing speed decreases when slid upwards and increases downwards.

@9 PITCH/KEY, RANGE button

•With this button you can select PITCH and KEY ADJUST mode. Mode changes Pitch on, Key Adjust on and both off cyclically. PITCH LED indicates in Pitch mode and KEY ADJUST indicator in the display lights up in Key Adjust mode.

•RANGE:

Push this button for more than 1 sec to select the pitch range. The pitch range can be selected with the PARAMETERS knob from ±4,10,16,24 or 100%.

#0RVS button

• Push this button to set the RVS mode.

#1BRAKE button

• Push this button to set the BRAKE.

#2DRAG-S button

• Push this button to set the DRAG-S.

9

ENGLISH

(4) Display

q w e r

BPM

TITLE

t y u

i o

!0 y !1!2

qTrack, minute, second and frame displays

•These displays indicate current position information.

wTime mode indicators

•When the TIME button is pushed, the Time mode indicator switches as follows: ELAPSED:

Track’s elapsed time is displayed. REMAIN:

Track’s remaining time is displayed. T. ELAPSED:

The total elapsed time of disc is displayed. T. REMAIN:

The total remaining time of disc is displayed.

ePlay mode indicators

•When SINGLE indicator lights up, playback will finish at end of current track.

•When CONT. indicator lights up, playback continues.

rBPM indicators

•Lights when the BPM is displayed on the pitch display.

tMP3 indicators

• Lights when an MP3 disc is detected.

yLoop mode indicators

•DN-S1000 has Loop mode indicators which consist of A , B and two arrows. A and B marks indicate A and B points have been set.

•Two arrows indicate loop setting mode as follows.

or Left arrow only on:

Hot Start mode

Both arrows on:

Seamless Loop mode

, Both arrows flashing:

Seamless Loop Playing

, Left arrow on, right flashing:

Exit play from Seamless Loop

u MP3 file search mode indicator

FILE:

FILE indicator appears in display, when in the FILE name search mode.

FOLDER:

FOLDER indicator appears in display, when in the FILE & FOLDER name search mode.

TITLE:

TITLE indicator appears in display, when in the TITLE name search mode.

ARTIST:

ARTIST indicator appears in display, when in the ARTIST name search mode.

iCharacter display

•You can select the mode or function using PARAMETERS knob following the short message which is displayed on the character display area.

•The character display indicates the operation, mode name, data, etc., and displays such guide messages as “Push/Play” means if

“YES”, push PARAMETERS knob. The display

indicates and marks sometime, note that mark says you to turn PARAMETERS knob and marks says to push PARAMETERS knob.

•The PARAMETERS LED flashes when you can use PARAMETER knob, otherwise this knob used for Track Selection.

oPlay Position indicators

•Play position indicator:

The 30 dots indicate a visual track position marker during normal play. The 10 Orange dots indicate the play position during the reverse play mode.

•End of Message:

When the time remaining to the end of the track is less than the specified time, the EOM (End Of Message) play position indicator flashes along with the remaining time, notifying of the track end.

The EOM time can be set in the presets.

!0KEY ADJ. indicator

•KEY ADJ. indicator appears in display when the Key Adjust mode is ON.

!1MEMO indicator

•MEMO indicator appears in display when there is a memo setting found for the current playing track or the track at which the Cue standby mode is currently set.

!2Pitch display

•This indicator display the playback speed (pitch).

4COMPACT DISCS

1.Precautions on handling compact discs

•Do not allow fingerprints, oil or dust to get on the surface of the disc.

If the disc is dirty, wipe it off with a soft dry cloth.

•Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths to clean discs.

•Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its case or returning it.

•Do not bend the disc.

•Do not apply heat.

•Do not enlarge the hole in the center of the disc.

•Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.

•Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in winter. Do not attempt to dry the disc with a hair dryer, etc.

2.Precautions on storage

•After playing a disc, always unload it from the player.

•Always store the disc in the jewel case to protect from dirt or damage.

•Do not place discs in the following areas:

(1)Areas exposed to direct sunlight for a considerable time.

(2)Areas subject to accumulation of dust or high humidity.

(3)Areas affected by heat from indoor heaters, etc.

10

FAST SEARCH

QUICK JUMP

PITCH BEND

5 BASIC OPERATION

Play and pause

•Each push of the y PLAY/PAUSE (13) button switches between playback and pause. y PLAY/PAUSE (13) button illuminates solid green during playback and flashed in pause.

•When the y PLAY/PAUSE (13) button is pushed during play, the DN-S1000 pauses playback at that point. Push y PLAY/PAUSE (13) button once again and playback resumes.

•Playback will pause when SCRATCH is selected with the !8DISC MODE button and the scratch disc is held with your hand. Playback resumes when your hand is released.

Play and Cue

•When the i CUE button is pushed during playback, the track stops and returns to the original position of which playback started from, the (Cue point). This function is also called Back-Cue. With the Back-Cue function, you can start from exactly same position. The i CUE button illuminates solid red when DNS1000 is ready to start playback.

•You can set and change Cue point as follows.

•When you started playback.

•Track select finished.

•manual search.

Select the track

•Turn the @3TRACK knob.

•By pushing @3TRACK knob down while turning, the tracks will increment 10 at a time.

!Move the Cue point

•If you would like to start playback other from the beginning of the track, you need to move Cue Point using fast Search and manual search function.

You can move to the approximate playback start position by @4or @5FAST SEARCH buttons.

[QUICK JUMP]

• If the FAST SEARCH button is tapped shortly, the

1 playback position jumps about 10 seconds. The jump time can be selected in the preset mode from 10,20,30 or 60 sec.

[FAST SEARCH]

•When the FAST SEARCH button is pressed and held in, the disc is fast-searched.

	Push the !8DISC MODE	DISC MODE
	button to set o Scratch
2
	Disc to search mode. The	ON SCRATCH
		OFF SEARCH/
	!8DISC MODE button	BEND
	LEDs will turn off.

Turn the o Scratch Disc to change Cue point. You can hear the short sound of the current

3Cue point.

When o Scratch Disc is turned in the pause, Cue or frame repeat mode, it works as the manual search function.

After you found your

	4	preferred Cue point, push	CUE
		the i CUE button then a
		new Cue point is set.	CUE/STUTTER

Adjusting the pitch

•With Pitch slider you can adjust the playback speed (Pitch).

•If you would not prefer to change key of sound, use the Key Adjust function.

Push the @9 PITCH/KEY	PITCH/KEY
button to PITCH LED lights up.

1		RANGE
	•	PITCH → KEY (key adjust) → OFF
		Pitch decreases
		Move the @8Pitch slider to adjust
2	0	the pitch. The current pitch setting
		is displayed on the display.
		Pitch increases

DN-S1000 has five pitch ranges, 4%, 10%, 16%, 24% and 100%. When the @9 RANGE button is pushed for more than 1 sec,

3the pitch range can be selected PITCH/KEY with the @3 PARAMETERS

knob.

RANGE

ENGLISH

•When the @3PARAMETERS knob is pushed the pitch

3range is entered and the pitch range selection mode

is cancelled.

PARAMETERS

PUSH

TRACK SEARCH MP3 SEARCH MODE

Pitch Bend

•With PITCH BEND function you can change pitch temporary. DN-S1000 has two ways for this function PITCH BEND buttons and Scratch Disc.

[PITCH BEND +/– buttons]

• Push the @6PITCH BEND

– or @7+ button for momentary change of

1pitch.

While holding these buttons down, the pitch continues to change up to the limitation.

•After releasing the PITCH BEND buttons, playback pitch returns to slider setting.

[Scratch Disc]

•When the disc mode is set to SEARCH/BEND with the !8DISC

MODE button, the playback speed

2can be changed by turning o Scratch Disc during playback.

Power on play

•When “POWER ON PLAY” is set to “ON” at “⁄4 PRESET (10)”, playback starts from the first track on the disc when the power is turned on.

11