Denon DN-S3000 User Manual

TABLE TOP SINGLE CD PLAYER / æ ˜≥ª≥Ê∫ –≈J Æ g∞¤ ΩL

DN-S3000

OPERATING INSTRUCTIONS

INSTRUCCIONES DE OPERACION

BEDIENUNGSANLEITUNG

GEBRUIKSAANWIJZING

MODE D’EMPLOI

BRUKSANVISNING

ISTRUZIONI PER L’USO

æ fi ß @ ª°© ˙ Æ —

FOR ENGLISH READERS

PAGE

116

~ PAGE

120

FÜR DEUTSCHE LESER

SEITE

121

~ SEITE

135

POUR LES LECTEURS FRANCAIS

PAGE

136

~ PAGE

150

PER IL LETTORE ITALIANO

PAGINA

151

~ PAGINA

165

PARA LECTORES DE ESPAÑOL

PAGINA

166

~ PAGINA 180

VOOR NEDERLANDSTALIGE LEZERS PAGINA

181

~ PAGINA

195

FOR SVENSKA LÄSARE

SIDA

196

~ SIDA

110

§§

§Â

≤ ƒ 111 ≠ ∂

~ ≤ ƒ 126 ≠ ∂

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

1.Handle the power supply cord carefully

Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.

2.Do not open the top cover

In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer.

3.Do not place anything inside

Do not place metal objects or spill liquid inside the CD player. Electric shock or malfunction may result.

Please, record and retain the Model name and serial number of your set shown on the rating label.

Model No. DN-S3000 Serial No.

NOTE:

This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 5 °C (41 °F) –35 °C (95 °F).

CLASS 1 LASER PRODUCT

LUOKAN 1 LASERLAITE

KLASS 1 LASERAPPARAT

LABELS (for U.S.A. model only)

CERTIFICATION

THIS PRODUCT COMPLIES WITH DHHS RULES 21 CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

	,,CLASS 1
	LASER PRODUCT,,
ADVARSEL:	USYNLIG LASERSTRÅLING VED ÅBNING, NÅR
	SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION.
	UNDGÅ UDSAETTELSE FOR STRÅLING.
VAROITUS!	LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ
	KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA
	ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1
	YLITTÄVÄLLE NÄKYMÄMTTÖMÄLLE LASERSÄTEILYLLE.
VARNING–	OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA
	BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN
	UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING SOM
	ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1.

SAFETY INSTRUCTIONS

1.Read Instructions – All the safety and operating instructions should be read before the product is operated.

2.Retain Instructions – The safety and operating instructions should be retained for future reference.

3.Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.

4.Follow Instructions – All operating and use instructions should be followed.

5.Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

6.Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.

7.Water and Moisture – Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8.Accessories – Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory

recommended by the manufacturer.

9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

10.Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions.

12.Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL

ELECTRICAL CODE ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

13.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product.

15.Outdoor Antenna Grounding – If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A.

16.Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.

17.Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

18.Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

19.Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

20.Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

21.Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a)When the power-supply cord or plug is damaged,

b)If liquid has been spilled, or objects have fallen into the product,

c)If the product has been exposed to rain or water,

d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,

e)If the product has been dropped or damaged in any way, and

f)When the product exhibits a distinct change in performance – this indicates a need for service.

22.Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.

23.Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

24.Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

25.Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

2

ENGLISH

DEUTSCH FRANÇAIS

ITALIANO

ESPAÑOL NEDERLANDS SVENSKA

TOP PANEL DIAGRAM / OBERES BEDIENFELD-SCHEMA / SCHEMA DU PANNEAU SUPERIEUR / SCHEMA PANNEAU SUPERIEUR DIAGRAMA DEL PANEL SUPERIOR / OVERZICHT VAN BOVENPANEEL / BILD ÖVER ÖVERSTA PANELEN / ≥ª≠ ±™ Oµ¯π œ

!2!4 !6!8 @6 @0 !3!5 !7!9 @1@7

@8

@ @3@ @5@9#0

	#1
	#2
!1	#3
	#4

#5 !0

o i

#9 #8#7 #6

3

FRONT PANEL DIAGRAM / VORDERES BEDIENFELD-SCHEMA /

SCHEMA DU PANNEAU AVANT / SCHEMA PANNEAU AVANT / DIAGRAMA DEL PANEL FRONTAL / OVERZICHT VAN VOORPANEEL / FRONTPANELEN / ´e≠ ±™ Oµ¯π œ

NOTE ON USE / HINWEISE ZUM GEBRAUCH /

OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA

q w

REAR PANEL DIAGRAM / HINTERES ANSCHLUSSFELD-SCHEMA /

SCHEMA DU PANNEAU ARRIERE / SCHEMA PANNEAU ARRIERE / DIAGRAMA DEL PANEL POSTERIOR / OVERZICHT VAN ACHTERPANEEL / BAKPANELEN / ´·≠ ±™ Oµ¯π œ

e

r t y u

•Avoid high temperatures.

Allow for sufficient heat dispersion when installed on a rack.

•Vermeiden Sie hohe Temperaturen. Beachten Sie, daß eine ausreichend Luftzirkulation gewährleistet wird, wenn das Gerät auf ein Regal gestellt wird.

•Eviter des températures élevées

Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.

•Evitate di esporre l’unità a temperature alte. Assicuratevi che ci sia un’adeguata dispersione del calore quando installate l’unità in un mobile per componenti audio.

•Evite altas temperaturas

Permite la suficiente dispersión del calor cuando está instalado en la consola.

•Vermijd hoge temperaturen.

Zorg voor een degelijk hitteafvoer indien het apparaat op een rek wordt geplaatst.

•Undvik höga temperaturer.

Se till att det finns möjlighet till god värmeavledning vid montering i ett rack.

•Handle the power cord carefully.

Hold the plug when unplugging the cord.

•Gehen Sie vorsichtig mit dem Netzkabel um. Halten Sie das Kabel am Stecker, wenn Sie den Stecker herausziehen.

•Manipuler le cordon d’alimentation avec précaution.

Tenir la prise lors du débranchement du cordon.

•Manneggiate il filo di alimentazione con cura. Agite per la spina quando scollegate il cavo dalla presa.

•Maneje el cordón de energía con cuidado. Sostenga el enchufe cuando desconecte el cordón de energía.

•Hanteer het netsnoer voorzichtig.

Houd het snoer bij de stekker vast wanneer deze moet worden aanof losgekoppeld.

•Hantera nätkabeln varsamt.

Håll i kabeln när den kopplas från el-uttaget.

•Keep the set free from moisture, water, and dust.

•Halten Sie das Gerät von Feuchtigkeit, Wasser und Staub fern.

•Protéger l’appareil contre l’humidité, l’eau et lapoussière.

•Tenete l’unità lontana dall’umidità, dall’acqua e dalla polvere.

•Mantenga el equipo libre de humedad, agua y polvo.

•Laat geen vochtigheid, water of stof in het apparaat binnendringen.

•Utsätt inte apparaten för fukt, vatten och damm.

•Unplug the power cord when not using the set for long periods of time.

•Wenn das Gerät eine längere Zeit nicht verwendet werden soll, trennen Sie das Netzkabel vom Netzstecker.

•Débrancher le cordon d’alimentation lorsque l’appareil n’est pas utilisé pendant de longues périodes.

•Disinnestate il filo di alimentazione quando avete l’intenzione di non usare il filo di alimentazione per un lungo periodo di tempo.

•Desconecte el cordón de energía cuando no utilice el equipo por mucho tiempo.

•Neem altijd het netsnoer uit het stopkontakt wanneer het apparaat gedurende een lange periode niet wordt gebruikt.

•Koppla ur nätkabeln om apparaten inte kommer att användas i lång tid.

*(For sets with ventilation holes)

•Do not obstruct the ventilation holes.

•Die Belüftungsöffnungen dürfen nicht verdeckt werden.

•Ne pas obstruer les trous d’aération.

•Non coprite i fori di ventilazione.

•No obstruya los orificios de ventilación.

•De ventilatieopeningen mogen niet worden beblokkeerd.

•Täpp inte till ventilationsöppningarna.

•Do not let foreign objects in the set.

•Keine fremden Gegenstände in das Gerät kommen lassen.

•Ne pas laisser des objets étrangers dans l’appareil.

•E’ importante che nessun oggetto è inserito all’interno dell’unità.

•No deje objetos extraños dentro del equipo.

•Laat geen vreemde voorwerpen in dit apparaat vallen.

•Se till att främmande föremål inte tränger in i apparaten.

•Do not let insecticides, benzene, and thinner come in contact with the set.

•Lassen Sie das Gerät nicht mit Insektiziden, Benzin oder Verdünnungsmitteln in Berührung kommen.

•Ne pas mettre en contact des insecticides, du benzène et un diluant avec l’appareil.

•Assicuratevvi che l’unità non venga in contatto con insetticidi, benzolo o solventi.

•No permita el contacto de insecticidas, gasolina y diluyentes con el equipo.

•Laat geen insektenverdelgende middelen, benzine of verfverdunner met dit apparaat in kontakt komen.

•Se till att inte insektsmedel på spraybruk, bensen och thinner kommer i kontakt med apparatens hölje.

•Never disassemble or modify the set in any way.

•Versuchen Sie niemals das Gerät auseinander zu nehmen oder auf jegliche Art zu verändern.

•Ne jamais démonter ou modifier l’appareil d’une manière ou d’une autre.

•Non smontate mai, nè modificate l’unità in nessun modo.

•Nunca desarme o modifique el equipo de ninguna manera.

•Nooit dit apparaat demonteren of op andere wijze modifiëren.

•Ta inte isär apparaten och försök inte bygga om den.

CAUTION	• Please be care the environmental aspects of battery
• The ventilation should not be impeded by covering the	disposal.
ventilation openings with items, such as newspapers,	• The apparatus shall not be exposed to dripping or
table-cloths, curtains, etc.	splashing for use.
• No naked flame sources, such as lighted candles, should	• No objects filled with liquids, such as vases, shall be
be placed on the apparatus.	placed on the apparatus.

4

• DECLARATION OF CONFORMITY	• DECLARACIÓN DE CONFORMIDAD
We declare under our sole responsibility that this product,	Declaramos bajo nuestra exclusiva responsabilidad que
to which this declaration relates, is in conformity with the	este producto al que hace referencia esta declaración,
following standards:	está conforme con los siguientes estándares:
EN60065, EN55013, EN55020, EN61000-3-2 and EN61000-	EN60065, EN55013, EN55020, EN61000-3-2 y EN61000-
3-3.	3-3.
Following the provisions of 73/23/EEC, 89/336/EEC and	Siguiendo las provisiones de las Directivas 73/23/EEC,
93/68/EEC Directive.	89/336/EEC y 93/68/EEC.

• ÜBEREINSTIMMUNGSERKLÄRUNG	• EENVORMIGHEIDSVERKLARING
Wir erklären unter unserer Verantwortung, daß dieses	Wij verklaren uitsluitend op onze verantwoordelijkheid dat
Produkt, auf das sich diese Erklärung bezieht, den	dit produkt, waarop deze verklaring betrekking heeft, in
folgenden Standards entspricht:	overeenstemming is met de volgende normen:
EN60065, EN55013, EN55020, EN61000-3-2 und EN61000-	EN60065, EN55013, EN55020, EN61000-3-2 en
3-3.	EN61000-3-3.
Entspricht den Verordnungen der Direktive 73/23/EEC,	Volgens de bepalingen van de Richtlijnen 73/23/EEC,
89/336/EEC und 93/68/EEC.	89/336/EEC en 93/68/EEC.

• DECLARATION DE CONFORMITE	• ÖVERENSSTÄMMELSESINTYG
Nous déclarons sous notre seule responsabilité que	Härmed intygas helt på eget ansvar att denna produkt,
l’appareil, auquel se réfère cette déclaration, est conforme	vilken detta intyg avser, uppfyller följande standarder:
aux standards suivants:	EN60065, EN55013, EN55020, EN61000-3-2 och
EN60065, EN55013, EN55020, EN61000-3-2 et EN61000-	EN61000-3-3.
3-3.	Enligt stadgarna i direktiv 73/23/EEC, 89/336/EEC och
D’après les dispositions de la Directive 73/23/EEC,	93/68/EEC.
89/336/EEC et 93/68/EEC.
• DICHIARAZIONE DI CONFORMITÀ
Dichiariamo sotto nostra responsabilità che questo
prodotto, al quale si riferisce la presente dichiarazione, è
conforme ai seguenti standard:
EN60065, EN55013, EN55020, EN61000-3-2 e EN61000-3-
3.
In base alle disposizioni delle direttive 73/23/CEE,
89/336/CEE e 93/68/CEE.

•Use compact discs that include the mark.

CD’s with special shapes (heart-shaped CD’s, octagonal CD’s etc.) cannot be played on this set. Attempting to do so may damage the set. Do not use such CD’s.

•Benutzen Sie Compact Discs, die das Zeichen tragen.

Speziell geformte CD’s (herzförmige CDs, achteckige CDs, usw.) können auf dieser Anlage nicht abgespielt werden.

Der Versuch derartige CDs abzuspielen kann die Anlage beschädigen. Verzichten Sie auf die Benutzung solcher CDs.

•Utiliser des disques compacts portant le logo .

Des CD avec des formes spéciales (CD en forme de coeur, des CD octogonaux, etc.) ne peuvent pas être lus sur cet appareil.

Le fait de l’essayer, risque d’endommager le lecteur. Ne pas utiliser de tels CD.

•Utilizzare compact disc contrassegnati con .

Non è possibile eseguire in questa unità CD con forme speciali (CD a forma di cuore, ottagonali, ecc.), poiché possono danneggiare il prodotto. Non utilizzare tali CD.

•Use discos compactos con la marca .

En este equipo no es posible reproducir CDs con formas especiales (CDs con forma de corazón, CDs octagonales, etc.).

Si intenta hacerlo, el equipo podrá resultar dañado. No use este tipo de CDs.

•Gebruik compact discs voorzien van het logo .

CD’s met speciale vormen (bijv. CD’s in de vorm van een hart, achthoekige CD’s, enz.) kunnen met dit toestel niet worden afgespeeld.

Wanneer u dit toch probeert, zal u het toestel beschadigen. Speel dergelijke CD’s dus niet af.

•Använd CD-skivor med -märket.

Specialformade CD-skivor (hjärtformade, åttkantiga, m m) går inte att spela på den här apparaten. Utrustningen kan skadas om du försöker göra detta. Använd inte CD-skivor av denna typ.

Residue

Rückstand

Résidu

Residuo

Residuos

Oneffenheid

Plastrester

Disc

•The disc may not play normally if there is residue along the edges of the center hole.

•When using new discs in particular, use a pen, etc., to remove the residue.

•Die Disk kann nicht normal abgespielt werden, wenn sich ein Rückstand entlang der Mittellochenden befindet.

•Insbesondere, wenn Sie neue Disks benutzen, dann entfernen Sie mit einem Stift, etc. den Rückstand.

•Le disque peut ne pas être lu normalements s’il y a un résidu le long des bord du trou central.

•Lors de l’utilisation de nouveaux disques en particulier, utiliser un stylo à bille, etc., pour enlever le résidu.

•Il disco non viene eseguito in modo corretto se sono presenti residuo ai bordi del foro centrale.

•Quando si utilizzano dischi nuovi, utilizzare una penna o uno strumento simile, per rimuovere i residui.

•El disco no puede ser reproducido normalmente debido a la terminación deficiente de los bordes del agujero central.

•Para quitar estos residuos de material, especialmente cuando vaya a re-producir discos nuevos, utilice un bolígrafo, o algo similar.

•Het is mogelijk dat de disc niet normaal wordt weergegeven als de randen van het middengat van de schijf oneffenheden vertonen.

•Verwijder vooral bij gebruik van nieuwe discs de oneffenheden met een pen of iets dergelijks.

•Det kan uppstå fel vid CD-avspelningen om det finns plastrester kvar i mitthålet.

•Tänk på att bort dessa med en penna, e d, särskilt om CD-skivan är ny.

• FOR CANADA MODEL ONLY	• POUR LES MODELE CANADIENS
	UNIQUEMENT

CAUTION		ATTENTION
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE		POUR ÉVITER LES CHOCS ÉLECTRIQUES,
OF PLUG TO WIDE SLOT, FULLY INSERT.		INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE
		DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
		POUSSER JUSQU’ AU FOND.

CAUTION:

DO NOT USE THE DENON AMC-22 CD PICK-UP LENS CLEANER FOR THIS PRODUCT. THIS MIGHT DAMAGE THE LASER PICK-UP OF THIS PRODUCT.

ACHTUNG:

VERWENDEN SIE NICHT DEN CD-ABTAST-LINSENREINIGER DENON AMC-22 FÜR DIESES PRODUKT. SOLLTEN SIE DIES NICHT BEACHTEN, KÖNNTE DER LASERABTASTKOPF DIESES PRODUKTES BESCHÄDIGT WERDEN.

ATTENTION :

N’UTILISEZ PAS LE NETTOYEUR DE CAPTEUR D’OBJECTIF CD DENON AMC-22 POUR CE PRODUIT. CECI POURRAIT ENDOMMAGER LE CAPTEUR LASER DE CD DE CE PRODUIT.

AVVERTENZA:

NON UTILIZZARE L'UNITÀ DI PULITURA DELLE LENTI DEI CD DENON AMC-22 PER QUESTO PRODOTTO, POICHÉ POTREBBE DANNEGGIARE IL DISPOSITIVO LASE DEL PRODOTTO.

PRECAUCIÓN:

NO UTILICE EL LIMPIADOR DE OBJETIVO DEL DETECTOR DE CD DEL DENON AMC-22 PARA ESTE PRODUCTO.

ESTO PUEDE DAÑAR EL DETECTOR LASER DE ESTE PRODUCTO.

OPGELET:

GEBRUIK DE PICK-UPLENSREINIGER VAN DE DENON AMC-22 NIET VOOR DIT PRODUCT. DIT KAN DE LASER PICK-UP VAN DIT PRODUCT BESCHADIGEN.

FÖRSIKTIGT:

ANVÄND INTE LINSAVPUTSAREN FÖR DENON AMC-22:NS CD-PICKUP FÖR DENNA PRODUKT. DET KAN SKADA PRODUKTENS LASERPICKUP.

5

ENGLISH

– TABLE OF CONTENTS –

z Main features .....................................................	6
x Connections/Installation/
Installing the 7“record adaptor...........................	7
c Part names and functions ..........................	8 ~ 10
v Compact discs ..................................................	10
b Basic operation .................................................	11
n Next Track Reserve ..........................................	12
m Scratch..............................................................	12
, Seamless loop/Hot start/Stutter .......................	13
. A/B trim ............................................................	14

⁄0Sampler ............................................................	15
⁄1MP3 playback ...................................................	16
⁄2Platter effect.....................................................	17
⁄3Memo (Custom setting memory).....................	18
⁄4Preset ...............................................................	19
⁄5Specifications ...................................................	20
⁄6Replacing the belt.............................................	20

•ACCESSORIES

Check that the following parts are included in addition to the main unit:

.....................................q Operating instructions	1	..............................................r Hexagon wrench	1
w Connection cords for signal output (RCA) .......	1	t Adaptor unit .....................................................	1
e Belt...................................................................	1

1 MAIN FEATURES

Congratulations on your new purchase of the DNS3000. The DN-S3000 table top single CD player is equipped with a variety of advanced features, functions and rich performance for unlimited creativeness and showmanship.

Professional Structure and parts

1.Active Motor Platter

When playback is started, the Platter turns, feels and reacts in the same way as with an analog turntable.

The active Platter consists of the Motor-driven Platter, Slip Mat, Scratch Disc, and Slip Sheet just like an analog turntable for true emulation. The beats can be matched and scratching can be performed with the same feeling as an analog turntable.

2.Slot loading and Removable drive

Our newly designed replaceable drive (Slot-in type) structure is geared for professionals who require virtually “zero down time”. The heavyduty drives are built with optimum parts to assure longevity.

3.Esthetically Ambient Design

Visibility is greatly improved thanks to the large FL tube displays, backlit buttons and the red illumination eject bar. All of these items come in handy during low light environments.

Features and Functions

The implementation of a powerful DSP and large memory capacity allows for many new controlling features such as:

1.SCRATCH

Thanks to the active Platter and Scratch Disc, the Scratch sound is comparable to analog turntables.

Furthermore, the Main Track and Samples can be selected as the Scratch sound source at the touch of a button.

2.MP3 PLAY BACK

It is possible to play MP3 files created in the specified format.

Files can be searched for easily either manually, by scanning or using a number of file search functions (File search, File/Folder search, Artist name search, Title name search, File name search).

In addition, a number of play modes are supported, including scratch, hot start and seamless loop playback.

3.NEXT TRACK RESERVE (New)

The next track can be selected while continuing to play the current track. Replacing with playback of the next track without interrupting playback is possible.

4.HOT START and STUTTER

The Hot Start function lets you start playback immediately from a set point decided by you.The loaded Hot Start can also be used to “Stutter” that point. When in Stutter mode, momentary audio is triggered according to the length of time of which this button is held down and released.

5.SEAMLESS LOOP

With this function, any section on a disc can be played repeatedly between A & B points with no break in sound or limit in length. The DN-S3000 has a variety of looping options such as Exit and Reloop.

6.SAMPLER

On-board digital Sampler can record up to 15 seconds CD quality sound at 44.1kHz sampling frequency. You can seamlessly loop this sample or play it backwards (REVERSE). The pitch and output level of a sample can be adjusted independently.

The B point can be easily set or changed exactly the same way as you would with the A-B Seamless Loop function.

7.A/B TRIM and MOVE

The A and B points for the Seamless Loop and Sampler loop points can easily be adjusted using

the Scratch Disc.

Trim and Move modes are available.

A-B TRIM: For adjusting the points while playing the live loop.

A/B MOVE: For moving the points using the manual search.

8.PLATTER MODE

Analog turntable-like playback can be simulated using four Platter effects.

DRAG START: Simulates the dragging sound of a turntable’s slow starting up from a stop mode. (Start-up time can be adjusted.)

BRAKE: Simulates a winding-down sound of a turntable coming to a full stop slowly. (Slowing-down time can be adjusted.)

DUMP: Plays the sound backwards while continuing in a forward motion without losing “elapse time” when you return back to normal play.

RVS: (Reverse) Plays the sound backwards until you return to normal play.

9.MEMO

Various settings such as Cue Point, Hot Start, A- B Loop, Pitch and Key Adjust can be saved to the internal non-volatile memory for later recall. Up to 5000 points are available.

In Addtion, memo data can be transferred into the DN-S3000 from an another DN-S3000, DNS5000, DN-D9000 or DN-2600F.

10.PITCH/KEY ADJUST

PITCH: Playback speed is adjusted with PITCH slider. Adjustable pitch ranges are +/- 4, 10, 16, 24, 50,100% (selectable live).

KEY ADJUST: Keeps the original key even if the pitch playing speed is changed with the PITCH slider.

11.DIGITAL OUT

The digital output for Main provides a true 100% digital signal without any restrictions or limitations regardless of pitch change or mode setting.

12.FADER START / X-EFFECT IN/OUT

The DN-S3000 FADER START and X-EFFECT controls are compatible with our DN-X800 mixer. Only Fader Start is compatible with the DN-X400 mixer. When two DN-S3000s are connected by X-EFFECT, it is possible to compare their data memos.

13.SHOCKPROOF MEMORY

20 seconds of shock-proof memory guards against audible interruptions due to external mechanical shocks such as bumps or other hard vibrations, which is especially helpful for the mobile DJ as well as for nightclub-installed applications.

14.PRESETS

It is possible to customise the machine to your preference by saving your favourite setting to internal memory. For items found in the presets, please see page 19.

15.CD TEXT

6

2CONNECTIONS/INSTALLATION/

INSTALLING THE 7“(17cm) RECORD ADAPTOR

(1)CONNECTIONS

1.Turn off the POWER switch.

2.Connect the RCA pin cords between the DN-S3000 outputs and inputs of your mixer.

3.If your mixer has Fader Start function such as our DENON DN-X800 or DN-X400, connect FADER 1, 2 jacks to the mixer using 3.5 mm stereo mini cord.

4.If you have a DENON DN-X800 mixer, you can use the X-Effect function to control the Hot Starts, Samplers and Brake from the crossfader to get wide variety of operation.

Fig. 1 : Fader start connections example 1

Fig. 2 : X-Effect connections example 1

FADE FADE

CH1 CH2 CH3 CH4 Rch1 Rch2

DN-X400

LINE OUT		FADER
	DN-S3000
	X'EFFECT	X'EFFECT
	IN	OUT

RCA cord

3.5 mm stereo mini cord

FADE FADE

CH1 CH2 CH3 CH4 Rch3 Rch4 X'EFFECT

DN-X800

LINE OUT

FADER

DN-S3000

CD1

X'EFFECT X'EFFECT

IN OUT

LINE OUT

FADER

DN-S3000 or DN-S5000 CD2

X'EFFECT X'EFFECT

IN OUT

•X-EFFECT playback is possible with the CD 1 and CD 2.

•The memos of player and player can be compared when the CD players are connected by X-EFFECT.

•Relay play

(2)INSTALLATION

The DN-S3000 will work normally when the unit is installed with in 20 degrees off the level surface. If the unit is titled excessively, the disc may not be loaded properly.

NOTE:

Standing up of playback slows unusually after trans porting the product.At the time, push center of the !1Scratch Disc lightly.

MAX 20°

Front

ENGLISH

(3)INSTALLING THE 7” (17cm) RECORD ADAPTOR

Your own 7” (17cm) vinyl record can be installed on this product by using the provided adaptor.

This original design grants you the freedom to use your favorite vinyl record for that ultimate analog turntable feel.

*Make sure the record used is flat and not warped.

•7” (17cm) record adaptor accessories
q Adaptor......................................	1
w Screw(<head) ..........................	3
e Washer(Reserve) ......................	1	Washer	B	(Hexagon socket head)

1.Remove a screw B (Hexagon socket head) and pull out Stabilizer, Scratch disc, Slip mat, Slip sheet (White) and Anti-static sheet (Black).

2.Set Adaptor in the hole of 7” record.

3.Install Stabilizer in Adaptor.

4.Fix Adaptor with 3 screws. A (<head).

5.Install Slip sheet (White), Slip mat and 7” (17cm) record adaptor in Shaft of the product. (Do not install Anti-static sheet (Black).)

Slip mat

Anti-static sheet (Black)

Stabilizer

Scratch Disc

Slip sheet (White)

Attention

Fit the D shape of Shaft to the D hole of Stabilizer.

6. Install a screw B (Hexagon socket head) through Washer.

A

Adaptor

( + head)

7" (17 cm) record

B (Hexagon socket head)

Washer

	Stabilizer	7" (17 cm)
		record adaptor
		Slip mat
		Slip sheet (White)
		Shaft

NOTE:

• When RECORD to be used and friction of Slip mat are small, it may be unable to playback normally.

7

ENGLISH

3 PART NAMES AND FUNCTIONS

(1) Front panel

qDisc loading slot

•Load the disc slowly, and release it once the DN-S3000 starts grabbing the disc in.

CAUTIONS:

•Do not load discs when the power is turned off.

•Do not try to forcibly remove a disc once the DN-S3000 has started to grab the disc.

•Do not load more than once disc at a time or insert anything other than discs.

Otherwise loading mechanism may be damaged.

(2) Rear panel

ePOWER button (¢ON £OFF)

• Push this button to turn power on and off.

CAUTION:

•Do not turn off the power while a disc is loading or being ejected. Otherwise loading mechanism may be damaged.

rX-EFFECT jacks (X-EFFECT IN/OUT)

•Connect this jack to the DENON mixer DNX800 and DN-S3000 with 3.5 mm stereo mini cord.

w CD drive	t Analog output jacks
	(LINE OUT)
• This Drive is field replaceable by you.	• This is unbalanced RCA output jacks.
• Optional spare drive is sold separately.	• Audio signals outputs.
	y Fader start jack
	• Use this when your mixer has Fader Start
	function with 3.5 mm stereo mini cord.
	u Digital output jack
	• Digital data is available from this jack.
	• Use 75 Ω/ohms pin cord for connection.
	• We recommend you use braided wire type
	shielded cable.
	NOTE: The playback level after analog
	conversion is set to -6dB of the usual
	level.

(3) Top panel

CAUTION:

•Note that there are many buttons working two different function selected by short time pushing or long pushing (1second or more). The mark indicates short time push function and

mark indicates long time push function.

CAUTIONS:

•Do not forcibly try to stop the Platter when it is turning. Otherwise Platter moving mechanism may be damaged.

•If a problem with Platter rotation arises when the Platter is turning, the Platter stops turning and the pause mode is set.

iPlay/Pause button (13)

•This button will start or pause playback.

•Push once to start playback, once again to pause playback, and once more to resume playback.

oDISC EJECT button

•Eject disc with this button while button illumination light. Note that if illumination is off, you cannot eject disc.(Eject lock function)

!0CUE button

•Pushing this button in play mode will force the track back to the position which playback started. While in search mode, it makes new Cue point. (Cue)

•In Cue mode, by pushing the CUE button makes a Stutter sound from the Cue point. This is called Stutter play. (Stutter)

!1Platter/Scratch Disc

Use this vinyl scratch disc for manual search, Pitch Bend and Scratch operations.

•Platter:

The Platter turns when playback of the source select Scratch mode button is in the Main or Sampler position and in play mode.

•Scratch Disc:

When the Scratch Disc is turning, Scratch playback of the source selected (Main or Sampler) starts.

NOTE: The Platter does not turn when the Scratch mode is set to the SEARCH mode. If “PLATTER TURN STOP” is selected within the presets, the Platter never turns, regardless of the Scratch mode.

However, you still may be able to scratch normally without the platter spinning.

When using the player in this mode, there will a small delay upon release of the scratch disc. (This is normal)

To avoid this delay, press the PLAY button simultaneously upon release of the scratch disc with your thumb.

!2FLIP/CLR button

•FLIP:

Use this to select operating mode of A button, from Hot Start mode and Stutter mode. FLIP LED lights up in Hot Start mode.

•A CLR:

If the A button is pushed while pushing the FLIP button, you can clear the A point.

Or, by holding down just the FLIP button for more than 1 sec.

!3(SAMP) RVS/CLR button

•(SAMP)RVS:

Use this to select the sample play direction forward and reverse. When select reverse RVS LED lights up.

•(SAMP) CLR:

If the SAMP button is pushed while pushing the FLIP button, you can clear the SAMP data. Or, by holding down just the FLIP button for more than 1 sec.

!4A button

•Using this button you can create starting point for Hot Start, Seamless Loop and Stutter.

!5SAMP button

•Push this button to record or play sound of Sampler.

!6B button

•Use this to set the B point for A point of Seamless Loop.

!7(SAMP) B button

• Use this to set the Sampler loop B point.

!8EXIT/RELOOP button

•Use this to exit or return back again to Seamless loop playback. You can add variety to looping with this function.

•The LED indicates what’s going on about looping.

EXIT/RELOOP LED lit:

Seamless Loop on or playing. EXIT/RELOOP LED flashing:

Playback after exit loop.

8

!9(SAMP)EXIT/RELOOP

•Use this to turn the Sampler Loop mode on and off. Also acts as EXIT/RELOOP button for Sampler Loop to exit or back again.

@0A/B TRIM button

•With push of this button, the A and B point trim mode changes on and off while in PLAY or CUE mode.

@1(SAMP.) STOP button

•Push this button while in Sampler record or playback, Sampler record or playback stops.

@2TITLE button

•CD TEXT:

When there is CD text data, the CD text data is displayed when the button is pressed.

•MP3:

When an MP3 file has ID-3 tag data, the title, artist name and album name are selected and displayed each time the button is pressed.

@3 CONT./SINGLE, RELAY button

•CONT./SINGLE:

Short pushing play ending mode between CONT (continue: play more tracks) and SINGLE (stop playing and ReCUE’s back to your set point).

•SINGLE PLAY LOCK:

SINGLE PLAY LOCK can be selected by PRESET(9). At this time , if this button is pushed, it will be selected. When SINGLE PLAY LOCK is selected, track selection during playback is disabled. This prevents playback from stopping when the Track Select Knob is turned accidentally during playback.Play ending mode is the same as single.

•RELAY:

You can turn on and off RELAY PLAY mode. Relay playback is possible when two DNS3000s are connected by X-EFFECT.

@4 TIME, T.TIME button

•TIME:

A short push will displays mode changes between ELAPSED TIME and REMAIN TIME.

•T.TIME:

A long push, will display mode changes between TRACK TIME and DISC TIME.

•So, you can select display mode from four modes, TRACK ELAPSED, TRACK REMAIN, DISC ELAPSED and DISC REMAIN.

@5 MEMO, PRESET button

•MEMO:

The memo mode starts when this button is pushed once in the Cue mode.

•PRESET:

When this button is pushed for more than 1 sec, the PRESET mode menu is displayed.

@6(SAMP) PITCH button

•Push this button, pitch of Sampler can be adjusted with the PARAMETERS knob.

@7(SAMP) VOL. button

•Push this button, output level of Sampler playback can be adjusted with the PARAMETERS knob.

@8NEXT TRACK button

•If this button is pushed during playback, the NEXT TRACK mode will be selected. The next track can be selected with the PARAMETERS knob.

@9SCRATCH MODE, SEARCH button

Select the source for Scratch playback and the manual search/bend mode.

•MAIN:

This button lights up or blinks at orange. Manipulate Main Track sound

•SAMP.:

This button lights up or blinks at green. Manipulate Sampler Track sound

•SEARCH:

When this button is pushed for more than 1 sec, the SEARCH mode is selected.

When the Scratch Disc selector is set to SEARCH during playback, it works as the pitch bend function.

When Scratch Disc is turned in the pause or standby mode, works as the manual search function. Manual search works and you can move the CUE point around by one frame at a time (1/75 second) with an audible framerepeat sound, da-da-da-da.

#0TRACK/PARAMETERS knob

•TRACK:

When PARAMETERS LED is on, turn this knob to select tracks.

By pushing this knob down while turning, the tracks will change by 10 tracks at a time.

•PARAMETERS:

When the PARAMETER LED is flashing, turn this knob to select and change the parameter for items found in the Platter effects, Memo, and Preset data, etc.

ENGLISH

#1FAST SEARCH (6),

1-MIN.SKIP button

#2FAST SEARCH (7)

1-MIN.SKIP button

•1-MIN.SKIP:

When one of these buttons is short pushed, the playback position skips approximately 1 minute in the forward (6) or reverse (7) direction.

•FAST SEARCH:

When one of these buttons is pressed and held in, the disc is fast-searched in the forward (6) or reverse (7) direction.

#3PITCH BEND – button

#4PITCH BEND + button

•Pushing these buttons will change main playing speed temporary.

•While pushing PITCH BEND + button playing speed increases and speed decreases while pushing PITCH BEND – button.

•When release button, playing speed returns to the previous speed.

#5Pitch Slider

•Use this slider to adjust playing speed.

•The playing speed decreases when slid upwards and increases downwards.

#6 PITCH/KEY, RANGE button

•With this button you can select PITCH and KEY ADJUST mode. Mode changes Pitch on, Key Adjust on and both off cyclically. PITCH LED indicates in Pitch mode and KEY ADJUST indicator in the display lights up in Key Adjust mode.

•RANGE:

Push this button for more than 1 sec to select the pitch range. The pitch range can be selected with the PARAMETERS knob.

#7DUMP/RVS button

•Push this button to select between RVS or DUMP and OFF.

#8BRAKE button

• Push this button to set the BRAKE.

#9DRAG-S button

• Push this button to set the DRAG-S.

9

ENGLISH

(4) Display

q w	e	r	t	y	u
A1	B

TOTAL REMAIN ELAPSED			CONT. SINGLE			KEY ADJ.		DRAG S.
	m		s					BRAKE
m	s		f

MEMO			DUMP
			RVS
i	t	o	!0 !1

q Track, minute, second and frame	r Parameter indicators
displays	(upper 30 dots)
• These displays indicate current position	• Upper 30 dots on display indicate parameter,
information.	data setting for Effector.

wLoop mode indicators

•DN-S3000 has Loop mode indicators which consist of A , B and two arrows. A and B marks indicate A and B points are exist.

•Two arrows indicate loop setting mode as follow.

A1	B		or	A1	B Left arrow only on:
Hot Start mode
A1	B	Both arrows on:
Seamless Loop mode
A1	B	,	A1	B	Both arrows flashing:
Seamless Loop Playing
A1	B	,	A1	B	Left arrow on, right flashing:

Exit play from Seamless Loop

eTime mode indicators

•When the TIME/T.TIME button is pushed, the Time mode indicator switches as follows: ELAPSED:

Track’s elapsed time is displayed. REMAIN:

Track’s remaining time is displayed. TOTAL + ELAPSED:

The total elapsed time of disc is displayed. TOTAL + REMAIN:

The total remaining time of disc is displayed.

tCharacter display

•You can select mode or function using PARAMETERS knob following the short message which is displayed on the character display part.

•The character display indicates the operation, mode name, data, etc., and displays such guide messages as “Yes/Push_PM” means if “YES”, push PARAMETERS knob. The display

indicates and marks sometime, note that mark says you to turn PARAMETERS knob and marks says to push

PARAMETERS knob.

•The PARAMETERS LED flashes when you can use PARAMETER knob, otherwise this knob used for Track Selection.

yPlay mode indicators

•When SINGLE indicator lights up, playback will finish at end of current track.

•When CONT. indicator lights up, playback continues.

uKEY ADJ. indicator

•KEY ADJ. indicator appears in display when in the Key Adjust mode.

iMEMO indicator

•MEMO indicator appears in display when there is a memo setting for the currently playing track or the track at which the standby mode is currently set.

oPlay Position indicators (lower 33 dots)

•Play position indicator:

The 33 white dots indicate where is playing visually in a track in the normal play. The 11 Orange dots indicate play position in the reverse play mode.

•End of Message:

When the time remaining to the end of the track is less than the specified time, the EOM (End Of Message) play position indicator flashes along with the remaining time, notifying of the track end.

The EOM time can be set in the presets.

!0Pitch display

•This indicator display the playback speed (pitch).

!1PLATTER MODE indicators

•There are indicators for all Platter Effects DRAG-S., BRAKE, DUMP and RVS. These indicators light up when each mode is on.

4COMPACT DISCS

1.Precautions on handling compact discs

•Do not allow fingerprints, oil or dust to get on the surface of the disc.

If the disc is dirty, wipe it off with a soft dry cloth.

•Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths to clean discs.

•Always handle discs carefully to prevent damaging the surface; in particular when removing a disc from its case or returning it.

•Do not bend the disc.

•Do not apply heat.

•Do not enlarge the hole in the center of the disc.

•Do not write on the label (printed side) with a hard-tipped implement such as a pencil or ball point pen.

•Condensation will form if a disc is brought into a warm area from a colder one, such as outdoors in winter. Do not attempt to dry the disc with a hair dryer, etc.

2.Precautions on storage

•After playing a disc, always unload it from the player.

•Always store the disc in the jewel case to protect from dirt or damage.

•Do not place discs in the following areas:

(1)Areas exposed to direct sunlight for a considerable time.

(2)Areas subject to accumulation of dust or high humidity.

(3)Areas affected by heat from indoor heaters, etc.

10

5 BASIC OPERATION

Play and pause

•Each push of the i PLAY/PAUSE (13) button switches between playback and pause. PLAY/PAUSE (13) button illuminates solid green during playback and flashed in pause.

•When the i PLAY/PAUSE (13) button is pushed during play, the DN-S3000 pauses playback at that point. Push i PLAY/PAUSE (13) button once again and playback resumes.

•When the Scratch mode is set to MAIN, the Platter turns when the Main Track is played. When the rotation of Scratch Disc is stopped by pressing with the finger, the pause mode is set, and when the finger is released playback resumes.

NOTE:

Standing up of playback slows unusually after trans porting the product.At the time, push center of the !1 Scratch Disc lightly.

Push the @9SCRATCH MODE button for more than

2 1 sec to set @9Scratch Disc to search mode. The SCRATCH MODE button LEDs will turn off.

Turn the !1Scratch Disc to change Cue point. You can hear the short sound of the current

3 Cue point.

When !1Scratch Disc is turned in the pause, standby or frame repeat mode, works as the manual search function.

After you found your preferred Cue point, push

4 the !0CUE button then new Cue point is set.

Play and Cue

•When the !0CUE button is pushed during playback, the track stops and returns to the position that current playback started (Cue point) and prepares for next playback. This function is called Back-Cue. With Back-Cue function, you can start from exactly same position. The !0CUE button illuminates solid red when DN-S3000 is ready to start playback.

•You can set and change Cue point as follows.

•When you started playback.

•Track select finished.

•manual search.

!Move the Cue point

•If you would not like to start playback from beginning of the track, you need to move Cue Point using fast Search and manual search function.

		You can move to the approximate playback
		start position by #1or #2FAST SEARCH
		buttons.
		[1-MIN.SKIP]
		• If the FAST SEARCH button
	1	is pushed short time, the
		playback position skips for about 1 minute.

[FAST SEARCH]

•When the FAST SEARCH button is pressed and held in, the disc is fast-searched.

Adjusting the pitch

•With Pitch slider you can adjust the playback speed (Pitch).

•If you would not prefer to change key of sound, use the Key Adjust function.

Push the #6 PITCH/KEY button to PITCH LED lights up.

1

• PITCH → KEY (key adjust) → OFF

			Pitch decreases
			Move the #5Pitch slider to adjust
2			the pitch. The current pitch setting
			is displayed on the display.

Pitch increases

DN-S3000 has five pitch ranges, 4%, 10%, 16%, 24% 50% and 100%. When the #6 RANGE

3 button is pushed for more than 1 sec, the pitch range can be selected with the #0 PARAMETERS knob.

ENGLISH

Pitch Bend

•With PITCH BEND function you can change pitch temporary. DN-S3000 has three ways for this function PITCH BEND buttons and Scratch Disc.

[PITCH BEND +/– buttons]

• Push the #3PITCH BEND

– or #4+ button for momentary change of

1pitch.

While holding these buttons down, the pitch continues to change up to the limitation.

•After releasing the PITCH BEND buttons, playback pitch returns to slider setting.

When the Scratch source is set to MAIN and the Platter is turning, playback of the Main source can be slowed temporarily by lightly pressing

2!1Scratch Disc or PLATTER.

In addition, playback can be quickened temporarily by pushing Scratch Disc or PLATTER in the direction in which the Platter is turning.

[Scratch Disc]

• When the Scratch mode is set to SEARCH, the playback speed can be changed by turning !1Scratch Disc

3 during playback.

•The pitch increases gradually when the Scratch Disc is turned clockwise and decreases when turned counterclockwise.

•When you stop turning the Scratch Disc, the playing speed returns to the previous pitch.

Select the track

•Turn the #0TRACK knob.

•By pushing #0TRACK knob down while turning, the tracks will change 10 at a time.

Relay playback

•Relay Play function is a playback mode to continue play tracks of CDs in two DN-S3000s.

•Connect the X-EFFECT IN/OUT terminals between two DN-S3000s.

q, w

Start Relay Play

q Push the RELAY button for more than 1 sec to enable Relay play mode. You can set Relay mode as below.

•In the single play mode, when the one player’s playback reaches end of track, another DN-S3000 starts playing.

1• In the continuous play mode, when the whole tracks on one side are finished, another DN-S3000 starts.

•The discs in two DN-S3000s can be played alternately by setting both DNS3000 to the relay play mode.

•Relay play can be set in the program and random play modes.

•Relay play is possible also for DN-S3000 or DN-S5000.

	Stop Relay Play
	w When the RELAY button
2	is pushed for more than 1
	sec while in the relay play
	mode, the relay play
	mode is turned off.

Power on play

•When “POWER ON PLAY” is set to “ON” at “⁄4 PRESET (8)”, playback starts from the first track on the disc when the power is turned on.

11