Denon AVR-5805 User Manual

0 (0)

AV SURROUND RECEIVER

AVR-5805

OPERATING INSTRUCTIONS [Upgrade version]

Setting the Video Setup ·······························································2 Setting the HDMI/DVI In Assignment·········································2 Setting the Video Convert Mode·················································3

The video conversion function··················································3, 4 Relationship between the video input signal and monitor output according to the video convert mode settings of MAIN ZONE····························································4, 5

Setting the HDMI/Component Out ·············································6

Selection of resolution setting (SCALE)········································7

Setting the Network Setup ··························································7

Setting the IP Address······························································7, 8 Setting the Proxy ··········································································8 Setting the Network Option ·····················································8, 9

ENGLISH

Contents

This manual includes explanations of functions that are added after upgrading the receiver. For instructions on operating the receiver, also refer to the operating instructions included with the receiver.

Rear Panel ······················································································2

Internet radio function··································································9

vTuner ···························································································9

Music server function ···································································9 System requirements

····································································9 Broadband Internet connection ····················································9 Modem ·······················································································10 Router ·························································································10 Ethernet cable (CAT-5) ································································10 Personal computer······································································10 Others ·························································································10 TUN (Tuner) / D-TU (Digital Tuner) system buttons ····················11 Connections ················································································11

Network Audio Function

System Setup

Windows Media Connect ···························································16

Explanation for installing Windows Media Connect ···················16

vTuner ···························································································16 Windows Media DRM ·································································16

Additional Information

Listening to Internet radio··························································12 Presetting (registering) Internet radio stations ·······················13

Listening to preset Internet radio stations··································13

Registering Internet radio stations in your favorites ··············13

Listening to Internet radio stations registered in your favorites ··········································································14 Deleting radio stations from your favorites ································14

Character search function (searching by first letter)···············14 Updating the list of radio stations ············································14 Playing music files stored on the computer (music server) ··············································································15

Playing music files that have been preset or registered in your favorites ··········································································15

Operating the AVR-5805 using a browser ································15

Examples of web control operation screens ······························16

FCC INFORMATION (For US customers)

1. COMPLIANCE INFORMATION

Product Name: AV Surround Receiver Model Number: AVR-5805

This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.

Denon Electronics (USA), LLC 19C Chapin Road, Suite 205 Pine Brook, NJ 07058-9385 Tel. 973-396-0810 (Main)

2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved by DENON may void your authority, granted by the FCC, to use the product.

3. NOTE

This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the product into an outlet on a circuit different from that to which the receiver is connected.

• Consult the local retailer authorized to distribute this type of product or an experienced radio/TV technician for help.

This class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

ENGLISH

System Setup

After upgrading, part of the system setup menu changes.

Setting the Video Setup

[ Old on screen display ]

• After upgrading, the “Video Scaler” and “3D Y/C Separation” items disappear from the “Video Setup” menu.

Setting the HDMI/DVI In Assignment

Since there are now five HDMI input terminals, the “HDMI/DVI In Assign” screen changes.

There are five HDMI input terminals.

Rear Panel

[ New on screen display ]

[ Default ] [ Example ]

System Setup System Setup

ENGLISH

Setting the Video Convert Mode

Set whether or not to use the video conversion function.

ENTER <STATUS>D H F G

SYSTEM SETUP

SURROUND PARAMETER

ENTER

SYSTEM SETUP

SURROUND

PARAMETER

D H F G

[ON SCREEN]

About the button names in this explanation

<>: Buttons on the main unit []: Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

• Down-converting from the component video signal to the S-Video and composite video signal is possible only when the resolution of a component video signal is 480i / 576i.

• When a non-standard video signal from a game machine or some other source is input, the video conversion function might not operate. If this happens, please set the “Video Convert Mode” to “OFF”.

• When the video conversion function has been used, information such as that of text broadcasts which has been added to the video signal might not be output. If this happens, please set the “Video Convert Mode” to “OFF”.

Press

DD HH

to select “Video Convert Mode”, then

press ENTER.

Press

DD HH

to select the input source, then press

FF GG

to set.

ON, OFF:

Select “ON” to use the video conversion function, “OFF” if you do not want to use it.

Press ENTER.

Press

DD HH

to select “Video Setup” at the “System

Setup Menu”, then press ENTER.

The video conversion function

The AVR-5805 is equipped with a function for up and down converting video signals. Because of this, the AVR-5805’s MONITOR OUT terminal can be connected to the monitor (TV) with a set of cables offering a higher quality connection, regardless of how the player and the AVR-5805’s video input terminals are connected. Generally speaking, analog video connections using the component video terminals offer the highest quality playback, followed by connections using the S-Video terminals, then connections using the regular video terminals (yellow).

The flow of the video signals.

This unit’s input terminals This unit’s output terminals

(Component video

terminals)

(S-Video terminal)

(Video terminal)

(Component video

terminals)

(MONITOR OUT ZONE2)

(S-Video terminal)

(MONITOR OUT ZONE2)

(Video terminal)

(MONITOR OUT ZONE2)

(HDMI / DVI-D

terminals)

(HDMI / DVI-D

terminals)

: only MAIN ZONE 480i/576i

¢ Cautions on the ZONE2 video conversion

function

There is no TBC (Time Base Collector) for ZONE2. When the component video terminals are used to connect the AVR5805 with a TV (or monitor, projector, etc.) and the video (yellow) or S-Video terminals are used to connect the AVR-5805 with a VCR, depending on the combination of the TV and VCR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes. If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-5805 and the VCR, or if your VCR has a TBC function, turn it on.

System Setup System Setup

ENGLISH

• It is not possible to down-convert from HDMI and DVI-D input signals to the component, S-Video or composite video monitor output terminals.

•Video down conversion to the MAIN ZONE’s monitor output is only possible when the component video input resolution is 480i (interlaced standard definition video – NTSC format, for North America) or 576i (interlaced standard definition video – PAL format, for Europe and other countries).

• Set the resolution of the video output to one that is compatible with the resolution of your monitor.

• When “Component” is set at “Scaler” under “HDMI/Component Out”, the signals are output to the HDMI/DVI-D monitor output terminal with their original resolution. Use a monitor compatible with a resolution of 480i/576i.

• If you do not want to use the function for converting analog video signals to HDMI signals, select “OFF” for “Analog to HDMI Convert” at “Setting the HDMI/Component Out” ( page 6). In this case, the function for video up conversion to the component video terminal operates.

¢ The analog video to HDMI conversion function

• The AVR-5805’s video up-conversion function lets you output analog video input signals (component – 480i/576i, 480p/576p, 1080i or 720p; S-Video and composite video - 480i/576i) to the HDMI monitor output terminal.

•With the AVR-5805, the resolution of the signal output to the HDMI MONITOR OUT terminal can be selected ( page 6). The resolutions with which the monitor is compatible can be checked using <STATUS>or [ON SCREEN].

Relationship between the video input signal and monitor output according to the video convert mode settings of MAIN ZONE

: Not output

✳1:On screen display superimposed on video signal and output. ✳2:On screen display superimposed on S-Video signal and output. ✳3:Video signals are not output when the analog to HDMI convert function is

set to “ON”.

: On screen display only displayed for SYSTEM SETUP, SURROUND

PARAMETER and [ON SCREEN].

: When “OFF” is selected for the “Analog to HDMI Convert” setting, no

video signals other than the HDMI input signal are output.

:Including the contents of and above.

•

HDMI MONITOR OUT: When there is no HDMI input signal and “HDMI” is selected for the “Scaler” setting, the signal is output as set with the “Resolution” setting. When “Component” is selected for the “Scaler” setting, the signal is output with the same resolution as the input signal.

• COMPONENT MONITOR OUT:

When “Component” is selected for the “Scaler” setting, the signal is output as set with the “Resolution” setting. However, the output resolution is limited to a maximum of 480p/576p if the input signal is copyright-protected.

: Signal input

: No signal

480p ~ 720p : 480p/576p/1080i/720p

• The MAIN ZONE video conversion function is compatible with the following

format: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60.

• When SECAM signals of video input are up-converted, the signals are

output in PAL format from the S-Video connector.

• When the input signal is set to component video 1080p, the signals cannot

be output to the HDMI monitor output terminal.

Video convert

VIDEOS-VIDEOCOMPONENTHDMI

MONITOR OUT

VIDEOS-VIDEOCOMPONENTHDMI

Input signals

VIDEO ✳3

S-VIDEO S-VIDEO

VIDEO S-VIDEO S-VIDEO

COMPONENT COMPONENT

COMPONENT ✳1 COMPONENT ✳1

S-VIDEO

COMPONENT ✳2 COMPONENT ✳2

S-VIDEO

COMPONENT ✳2 COMPONENT ✳2

EE EE EE EE

(1080p)

(480i/576i)

EE EE EE CC CC EE CC CC EE EE

(480p ~ 720p)

EE EE EE EE

EE EE EE EE EE EE EE

VIDEO S-VIDEO S-VIDEO

COMPONENT

EE EE

VIDEO VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO

EE EE

COMPONENT

EE EE

COMPONENT COMPONENT

(1080p)

(480p ~ 720p)

(480i/576i)

(480p ~ 720p)

EE CC EE CC EE CC

(1080p)

CC EE CC EE

EE EE EE EE EE

COMPONENT ✳1 COMPONENT ✳1 COMPONENT ✳1

COMPONENT ✳2

VIDEO VIDEO

VIDEO

COMPONENT ✳1

VIDEO

COMPONENT ✳2

S-VIDEO S-VIDEO S-VIDEO

VIDEO

(480i/576i)

(1080p)

(480p ~ 720p)

CC EE CC CC CC CC

(480i/576i)

CC CC EE EE

EE EE

EECC

COMPONENT ✳2 COMPONENT ✳2 COMPONENT ✳2

S-VIDEO S-VIDEO S-VIDEO S-VIDEO

COMPONENT ✳2

S-VIDEO

EE EE

HDMI

EE EE

(480p ~ 720p)

EE CC CC EE CC CC

(1080p)

EE EE EE EE

CC CC CC CC CC

VIDEO ✳2 S-VIDEO ✳2 S-VIDEO ✳2

COMPONENT

VIDEO VIDEO S-VIDEO S-VIDEO S-VIDEO S-VIDEO

COMPONENT

EE EE EE EE

HDMI HDMI HDMI HDMI HDMI

(1080p)

(480p ~ 720p)

(480i/576i)

(480p ~ 720p)

CC EE CC EE CC

(1080p)

CC EE CC EE

CC CC CC CC CC

COMPONENT COMPONENT ✳1 COMPONENT ✳1 COMPONENT ✳1

COMPONENT ✳2

VIDEO

COMPONENT

VIDEO ✳3

VIDEO

COMPONENT ✳1

VIDEO

COMPONENT ✳2

S-VIDEO S-VIDEO S-VIDEO S-VIDEO

HDMI ✳1

HDMI

HDMI ✳1 HDMI ✳1 HDMI ✳2 HDMI ✳2

(480i/576i)

COMPONENT ✳2

S-VIDEO

COMPONENT

S-VIDEO

HDMI ✳2

(480i/576i)

(480p ~ 720p)

(1080p)

CC CC CC CC

CC CC

COMPONENT ✳2

S-VIDEO S-VIDEO S-VIDEO S-VIDEO

HDMI ✳2 HDMI ✳2

(480i/576i)

COMPONENT ✳2

S-VIDEO S-VIDEO

HDMI ✳2

CCCC

System Setup System Setup

ENGLISH

About the button names in this explanation

<>: Buttons on the main unit []: Buttons on the remote control unit

Button name only :

Buttons on the main unit and remote control unit

: Signal input

: No signal

ENTER D H F G

SYSTEM SETUP

ENTER

SYSTEM SETUP

D H F G

: Not output

✳1:On screen display superimposed on video signal and output. ✳2:On screen display superimposed on S-Video signal and output.

: On screen display only displayed for SYSTEM SETUP,

SURROUND PARAMETER and [ON SCREEN].

: When “OFF” is selected for the “Analog to HDMI Convert”

setting, no video signals other than the HDMI input signal are output.

:Including the contents of and above.

Video convert

VIDEOS-VIDEOHDMI COMPONENT

MONITOR OUT

VIDEOS-VIDEOCOMPONENTHDMI

Input signals

S-VIDEO MONITOR

OUT

OFF

– –

✳1

✳2

✳1

✳2

✳1

✳2

✳1 HDMI ✳1 HDMI ✳1 HDMI ✳2 HDMI ✳2 HDMI ✳1 HDMI ✳1

EE EE EE EE EE

EE EE EE CC CC EE CC CC CC CC

CC EE EE

EE CC

EE EE EE EE EE EE EE

✳1

✳2

✳1

COMPONENT ✳1

✳1

VIDEO

S-VIDEO

✳2

S-VIDEO

VIDEO ✳2

S-VIDEO ✳1

VIDEO

COMPONENT ✳1

✳1

VIDEO

✳1

CC CC CC

CC EE CC CC CC

EE EE EE

EE CC

EE EE EE CC CC

COMPONENT ✳2 COMPONENT ✳2 COMPONENT ✳1

✳1

S-VIDEO

✳2

S-VIDEO

VIDEO ✳2

S-VIDEO ✳1

VIDEO

✳1

VIDEO

EE EE EE

CC EE CC CC CC CC

CC EE EE

CC CC CC CC

✳2

✳1

S-VIDEO

✳2

S-VIDEO

VIDEO ✳2

S-VIDEO ✳1

VIDEO

COMPONENT

✳1

–

Used

Not used

– – –

Used

Not used

– –

Used

Not used

–

HDMI ✳1

HDMI ✳2 HDMI ✳1

EE CC CC EE CC CC

CC CC CC

CC CC CC CC

COMPONENT COMPONENT COMPONENT

✳1

VIDEO

S-VIDEO

✳2

S-VIDEO

VIDEO ✳2

COMPONENT

S-VIDEO ✳1

VIDEO

– –

Used

Not used

HDMI ✳2

+ 13 hidden pages