Denon 270, DCM-370 User Manual

0 (0)
Denon 270, DCM-370 User Manual

STEREO CD PLAYER

DCM-370/270

OPERATING INSTRUCTIONS

MODE D’EMPLOI

INSTRUCCIONES DE OPERACION

 

HDCD

1

 

 

 

 

 

 

 

 

 

 

 

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER

DCM-370

 

 

 

 

 

 

REPEAT

PROG

STOP

PAUSE

PLAY

2

TRACK

 

 

1

2

3

 

 

 

 

REMOTE

3

 

 

 

4

 

 

 

 

 

SENSOR

 

DISC

MIN

SEC

5

6

7

8

 

 

 

 

 

 

4

¤‚⁄

‚‹ fi‚

9 101112

 

 

 

 

 

 

5

13141516

 

 

 

 

OPEN/CLOSE

DISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

¢ ON £ OFF

PHONES

DCM-370

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER

DCM-270

 

1

 

 

 

 

 

 

REPEAT

PROG

STOP

PAUSE

PLAY

 

2

TRACK

 

 

 

 

 

 

 

 

 

 

REMOTE

3

DISC

MIN

SEC

1

2

3

4

 

 

 

 

 

 

SENSOR

 

5

6

7

8

 

 

 

 

 

 

 

4

¤‚⁄

‚‹ fi‚

9 101112

 

 

 

 

 

 

 

5

13141516

 

 

 

 

OPEN/CLOSE

DISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

¢ ON £ OFF

PHONES

DCM-270

FOR ENGLISH READERS

PAGE

05

~ PAGE

16

POUR LES LECTEURS FRANCAIS

PAGE

17

~ PAGE

28

PARA LECTORES DE ESPAÑOL

PAGINA

29

~ PAGINA 37

IMPORTANT TO SAFETY

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION:

1.Handle the power supply cord carefully

Do not damage or deform the power supply cord. If it is damaged or deformed, it may cause electric shock or malfunction when used. When removing from wall outlet, be sure to remove by holding the plug attachment and not by pulling the cord.

2.Do not open the top cover

In order to prevent electric shock, do not open the top cover. If problems occur, contact your DENON dealer.

3.Do not place anything inside

Do not place metal objects or spill liquid inside the CD player. Electric shock or malfunction may result.

Please, record and retain the Model name and serial number of your set shown

on the rating label.

 

Model No. DCM-370/270

Serial No.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

NOTE:

This CD player uses the semiconductor laser. To allow you to enjoy music at a stable operation, it is recommended to use this in a room of 10°C (50°F) ~ 35°C (95°F).

LABELS (for U.S.A. model only)

CERTIFICATION

THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE.

CAUTION:

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

THE COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.

• FOR U.S.A. & CANADA MODEL ONLY

CAUTION

TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

• POUR LES MODELES AMERICAINS ET CANADIENS UNIQUEMENT

ATTENTION

POUR PREVENIR LES CHOCS ELECTRIQUES NE PAS UTILISER CETTE FICHE POLARISEE AVEC UN PROLONGATEUR UNE PRISE DE COURANT OU UNE AUTRE SORTIE DE COURANT, SAUF SI LES LAMES PEUVENT ETRE INSEREES A FOND SANS EN LAISSER AUCUNE PARTIE A DECOUVERT.

2

SAFETY INSTRUCTIONS

1.Read Instructions – All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions – The safety and operating instructions should be retained for future reference.

3.Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions – All operating and use instructions should be followed.

5.Water and Moisture – The appliance should not be used near water – for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, and the like.

6.Carts and Stands – The appliance should be used only with a cart or stand that is recommended by the manufacturer.

6A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart

combination to overturn.

7.Wall or Ceiling Mounting – The appliance should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.Ventilation – The appliance should be situated so that its location or position does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or, placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat – The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.

10.Power Sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Grounding or Polarization – Precautions should be taken so that the grounding or polarization means of an appliance is not defeated.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL

ELECTRICAL CODE ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS (NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC - NATIONAL ELECTRICAL CODE

12.Power-Cord Protection – Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

14.Cleaning – The appliance should be cleaned only as recommended by the manufacturer.

15.Power Lines – An outdoor antenna should be located away from power lines.

16.Outdoor Antenna Grounding – If an outside antenna is connected to the receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure A.

17.Nonuse Periods – The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time.

18.Object and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings.

19.Damage Requiring Service – The appliance should be serviced by qualified service personnel when:

A.The power-supply cord or the plug has been damaged; or

B.Objects have fallen, or liquid has been spilled into the appliance; or

C.The appliance has been exposed to rain; or

D.The appliance does not appear to operate normally or exhibits a marked change in performance; or

E.The appliance has been dropped, or the enclosure damaged.

20.Servicing – The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel.

3

ENGLISH FRANCAIS ESPAÑOL

NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION / NOTAS SOBRE EL USO

Avoid high temperatures.

Allow for sufficient heat dispersion when installed on a rack.

Eviter des températures élevées

Tenir compte d’une dispersion de chaleur suffisante lors de l’installation sur une étagère.

Evite altas temperaturas.

Permite la suficiente dispersión del calor cuando está instalado en la consola.

Handle the power cord carefully.

Hold the plug when unplugging the cord.

Manipuler le cordon d’alimentation avec précaution.

Tenir la prise lors du débranchement du cordon.

Maneje el cordón de energía con cuidado. Sostenga el enchufe cuando desconecte el cordón de energía.

Keep the set free from moisture, water, and dust.

Protéger l’appareil contre l’humidité, l’eau et lapoussière.

Mantenga el equipo libre de humedad, agua y polvo.

Unplug the power cord when not using the set for long periods of time.

Débrancher le cordon d’alimentation lorsque l’appareil n’est pas utilisé pendant de longues périodes.

Desconecte el cordón de energía cuando no utilice el equipo por mucho tiempo.

*(For sets with ventilation holes)

Do not obstruct the ventilation holes.

Ne pas obstruer les trous d’aération.

No obstruya los orificios de ventilación.

Do not let foreign objects in the set.

Ne pas laisser des objets étrangers dans l’appareil.

No deje objetos extraños dentro del equipo.

Do not let insecticides, benzene, and thinner come in contact with the set.

Ne pas mettre en contact des insecticides, du benzène et un diluant avec l’appareil.

No permita el contacto de insecticidas, gasolina y diluyentes con el equipo.

Never disassemble or modify the set in any way.

Ne jamais démonter ou modifier l’appareil d’une manière ou d’une autre.

Nunca desarme o modifique el equipo de ninguna manera.

CAUTION:

At the bottom of the player there are two red shipping screws for use when the player is transported. Before using the player, turn these screws counterclockwise and remove them.

If the shipping screws are still in place and the power is turned on, the disc tray will not open. If this happens, turn off the power, unplug the power cord from the power outlet and remove the shipping screws.

Retain these screws as they will be needed when the player is transported. Before transporting the player, take out the discs, close the disc tray, turn off the power after “0 00 00:00” is displayed and unplug the power cord from the power outlet. Then install the shipping screws by turning them clockwise. Be sure to fasten them securely.

PRECAUCION:

En la parte inferior del reproductor hay dos tornillos de transporte para su utilización durante el transporte. Antes de utilizar el reproductor, gire estos tornillos en sentido contrario a las agujas del reloj y extráigalos.

Si se activa la alimentación y los tornillos de transporte todavía están en su sitio, la bandeja de discos no se abrirá. Si ocurriera esto, desconecte el cable de alimentación de la toma de red eléctrica general y extraiga los tornillos de transporte.

Guarde estos tornillos ya que serán necesarios cuando se transporte el reproductor. Antes de transportar el reproductor, saque los discos, cierre la bandeja de discos, desactive la alimetnación después de que se visualice “0’ 00 00:00” y desconecte el cable de alimentación de la toma de red. A continuación proceda a instalar los tornillos de transporte girándolos en el sentido de las agujas del reloj. Asegúrese de fijarlos firmemente.

ATTENTION:

Au fond du lecteur, se trouvent deux vis de transport rouges, à utiliser lors du tranport du lecteur. Avant d’utiliser le lecteur, tourner ces vis dans le sens inverse des aiguilles d’une montre, et les retirer.

Si les vis de transport sont encore en place et l’alimentation allumée, le plateau de disque ne s’ouvrira pas. Si cela se produit, couper l’alimentation, débrancher le cordon d’alimentation de la prise de sortie d’alimentation, et retirer les vis de transport.

Conserver ces vis, car elle seront nécessaires lors d’un transport du lecteur. Avant de transporter le lecteur, retirer les disques, fermer le plateau de disque, couper l’alimentation après que “0 00 00:00” ait été affiché, et débrancher le cordon d’alimentation de la prise de sortie d’alimentation. Puis installer les vis de transport en les tournant dans le sens des aiguilles d’une montre. Assurez-vous de les avoir serrées solidement.

4

Thank you for purchasing the DENON compact disc player. Read the Operating Instructions thoroughly, and operate this player properly.

— TABLE OF CONTENTS —

FEATURES ……………………………………………………………………………5

CAUTIONS DURING USE …………………………………………………………5

NAMES OF PARTS AND THEIR FUNCTIONS …………………………………6, 7 OPENING AND CLOSING THE DRAWER AND

LOADING A DISC ………………………………………………………………8

CONNECTIONS ………………………………………………………………………9

NORMAL PLAY ………………………………………………………………………9

OTHER PLAY METHODS………………………………………………………10~13 INSTALLATION PRECAUTIONS …………………………………………………14

PLAY USING THE REMOTE CONTROL UNIT ………………………………14, 15 COMPACT DISCS …………………………………………………………………16

TROUBLE? CHECK THE PLAYER TO FIND

WHAT’S WRONG ………………………………………………………………16

SPECIFICATIONS ……………………………………………………………………16

In addition to the CD Player unit, please check to make sure the following items are included in the packing box.

(1)Operating Instructions ……………………………………………………1

(2)Connection Cords …………………………………………………………1

(3)Remote Control Unit RC-258 ……………………………………………1

(4)R6P (AA size) Dry batteries ………………………………………………2

IMPORTANT

(CANADIAN MODEL ONLY)

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus setout in the Radio Interference Regulations of the Canadian Department of Communication.

ENGLISH

FEATURES

(1)HDCD® (High Definition Compatible Digital) decoder (DCM370)

HDCD is an encoding/decoding technology that greatly reduces the distortion occurring at the time of digital recording while maintaining compatibility with the conventional CD format. HDCD allows 20-bit data to be converted into the 16-bit data of current CDs with no loss in sound quality.

The use of this HDCD decoder makes it possible to achieve the high resolution and low distortion characteristic of HDCD when playing HDCDcompatible discs, and DENON’s digital technology optimizes the high sound quality possibilities of HDCD technology. Furthermore, normal CDs and HDCD-compatible CDs are automatically identified, and the optimum digital signal processing for that type of disc used.

(2)High performance digital filter

The DCM-370/270 uses high precision 8-times oversampling digital filters.

(3)Simple Playback of 8cm CD Singles

8cm CD singles can be played without using an adaptor.

(4)Programming of up to 32 tracks

All of the tracks on a CD can be programmed to play in any order. Programming in units of discs (all tracks on a disc) is also possible.

(5)Newly developed carousel-type changer mechanism included

This mechanism can house five discs, and while one disc is playing the remaining four discs can be changed. In addition, the carousel can be rotated either clockwise or counterclockwise, so searching between discs is fast.

(6)Wireless Remote Control Accessory

In addition to general operations such as Play, Stop and Pause, this remote control unit enables direct selection, direct programming, and other functions. Use of the remote control unit adds greatly to the operating ease of the DCM-370/270, enhancing its outstanding features.

CAUTIONS DURING USE

This compact disc player is capable of playing discs which have the mark at right.

During track selection, during search and when the C player sustains a strong impact, the disc’s rotational

speed changes greatly, causing a small noise to be emitted. This is not a malfunction of the player.

If the CD player is operated while an FM or AM broadcast is being received, there may be noise in the FM or AM reception. Please switch the power to the CD player off at such times.

The DCM-370/270 has a broad dynamic range. Please exercise caution when turning up the volume on the amplifier in cases when the playback volume is low. If the volume is turned up too high, it could damage the speakers.

Do not use any discs but exclusive audio discs with this CD player.

Placing this player or its connection cords near a TV or other audio device could cause a humming sound to be emitted. If this occurs, relocate the player or reroute the connection cords.

Be sure to remove the disc from the player before moving it. The disc could be damaged if left in the player while it is being moved.

Do not place any object in the tray in the position where the disc is loaded, or open and close the tray with anything inside. Foreign objects in the tray could damage the play mechanism.

Do not move the player from a cold place to a warm place suddenly. If the player is cold when brought into a warm room, condensation could form, preventing proper operation of the player. If condensation does form on the player when it is brought into a warm room, wait at least 30 minutes before use.

CAUTION:

1.Always remove all discs from the trays when moving the set. Failure to do so may damage the set.

2.When the power is turned off, the varied level will be cleared and be set to 0 dB.

5

ENGLISH

NAMES OF PARTS AND THEIR FUNCTIONS

FRONT PANEL

 

 

 

 

DCM-370 only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

q

w e

 

 

 

r

 

 

t y u i o !0!1

 

 

HDCD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

 

 

 

1

 

 

 

 

 

REPEAT PROG

 

STOP PAUSE

PLAY

 

 

REMOTE

 

2

TRACK

 

1 2 3 4

 

 

 

 

 

 

 

 

 

 

 

 

3

 

 

 

 

 

 

 

 

 

 

 

 

 

SENSOR

 

DISC

MIN SEC

5 6 7 8

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

¤‚⁄

‚‹ fi‚

13141516

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9 101112

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPEN/CLOSE

DISC SKIP

 

 

 

 

 

 

 

 

 

 

 

 

 

¢ ON £ OFF

 

 

 

5 DISC AUTOMATIC DISC LOADING SYSTEM

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

!5

!4

!3!2

REAR PANEL

DCM-370 only

!7 !8 !9@0@1

 

IN

OUT

COAXIAL

SYNCHRO

CONTROL

DIGITAL OUT

LINE OUT

VARIABLE

 

DCM-370

1

 

 

 

 

 

 

 

2

 

1

2

3

4

 

 

3

¤‚⁄

5

6

7

8

 

 

5

‚‹ fi‚ 13141516

CAROUSEL

 

4

 

9 101112

 

 

 

 

 

 

 

5 DISC AUTOMATIC DISC LOADING SYSTEM

!6

DISPLAY

Disc Indicator

Play Indicator

 

Random Indicator

 

 

 

 

 

 

 

 

 

 

 

 

Program Indicator

 

 

 

Time

Pause Indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

minute

second

 

 

TRACK

PROGRAM

 

 

R 1

2

3

4

 

 

 

 

 

 

 

 

RANDOM

 

 

 

DISC

MIN

SEC

 

 

 

 

5

6

7

8

 

REPEAT ALL

 

 

 

 

 

 

 

 

 

 

°°°

1 DISC

°° °°

9 101112

 

 

 

REMAIN

 

13141516

 

 

 

 

16-track music calendar

 

Repeat Indicator

 

 

 

 

Remote control signal

 

 

 

 

Track Number

 

 

Receive Indicator

Disc Number

6

q Power Switch (POWER)

• Press this button to switch on the power.

w Remote Control Receptor (REMOTE SENSOR)

This receptor receives infrared signals from the wireless remote control unit.

Aim the wireless remote control unit at this receptor window when operating it.

e HDCD Indicator (DCM-370 only)

• This lights when an HDCD-compatible disc is playing. r Display Window

The Disc No., Track No., playing time and other information are displayed in the display window.

t Repeat Button (REPEAT)

Press this button for repeated playback. The REPEAT indicator appears on the display. The following three types of repeat modes are available.

When pressed once, the REPEAT and 1 indicators light and the track currently playing is repeated.

When pressed again, the

REPEAT

and

 

1 DISC

 

indicators light and all

 

the tracks on the disc currently playing are repeated.

When pressed again, the

 

 

,

 

 

 

 

 

and

 

 

indicators light

REPEAT

ALL

 

DISC

 

 

and all the discs currently set on the tray are repeated.

When pressed again, the

 

 

 

,

 

 

 

 

 

 

and

 

 

 

indicators turn off

REPEAT

 

ALL

 

DISC

 

and the repeat mode is cancelled.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The repeat function can also be used during programmed and random

 

playback, but in this case only the all repeat (

 

 

 

and

 

 

 

 

 

ALL

DISC

 

indicator) mode is available. (Refer to page 11 for details.)

y Program Button (PROG)

Press this button when you want to enter tracks for programmed playback. (Refer to page 10 for details.)

u Automatic/Manual Search Reverse Button

(8/6)

Press this button to return the pickup to the beginning of the present track. Press again to return to other tracks.

By pressing the button a number of times, the pickup will move back the corresponding number of tracks.

Keep on pressing this button for more than 0.5 seconds during playback for fast reverse search. As long as the button is kept pressed, music signals are played back faster than normal.

Keep on pressing this button for more than 5 seconds, reverse search becomes approximately 4 times faster.

iAutomatic/Manual Search Forward Button (7/9)

Press this button to move the pickup forward to the beginning of the next track. Press again to move ahead to other tracks.

By pressing the button a number of times, the pickup will advance the corresponding number of tracks.

Keep on pressing this button for more than 0.5 seconds during playback for fast forward search. As long as the button is kept pressed, music signals are played back faster than normal.

Keep on pressing this button for more than 5 seconds, forward search becomes approximately 4 times faster.

o Stop Button (2 STOP)

• Press this button to stop play.

ENGLISH

!0Pause Button (3 PAUSE)

Press this button to stop play temporarily.

Pressing the Pause button during play stops play temporarily. The 1

indicator goes off and the 3 indicator lights up.

To cancel the Pause state, press either the Play button !1or the Pause button !0a second time.

!1Play Button (1 PLAY)

Press this button to play a disc.

The 1 indicator lights up when the button is pressed, the number of the disc and the track being played is displayed by the Disc Number and Track No. indicator, and the amount of elapsed time for the current track is displayed by the Time indicator.

The 1 indicator goes off after playing of the final track of the final disc is finished and the player stops.

!2Disc Skip Button (DISC SKIP)

Each time this button is pressed, the carousel will rotate in a clockwise direction to the next tray position. This allows for loading or unloading of discs.

This button is also used to select the next disc, in the normal play continuously.

!3Open/Close Button (5 OPEN/CLOSE)

Press this button when opening.

The drawer is opened toward the front.

Press the button again to close the drawer.

!4Loading Drawer

Discs can be loaded and unloaded when this drawer is open. Do not force the drawer closed by hand.

!5Headphone Jack (PHONES)

Insert the jack of the headphones when desiring to listen to a disc privately. (Headphones are sold separately.)

!6Disc Trays (1 ~ 5)

• One disc per tray can be loaded.

!7Output Terminal (LINE OUT)

Connect the connection cords from these terminals to the amplifier’s input terminals. (Refer to page 9 for connections.)

!8SYNCHRO Jack (SYNCHRO)

To make a synchronized recording, this jack must be connected to the SYNCHRO jack of the deck with a connection cord. (Refer to page 9 for connections.)

!9Control Input Connector (CONTROL IN) (DCM-370 only)

This is the input connector for wired remote control.

Consult your DENON dealer if you wish to use this connector.

@0Control Output Connector (CONTROL OUT)

(DCM-370 only)

This is the output connector for wired remote control. Consult your DENON dealer if you wish to use this connector.

@1Digital Audio Output Connector (COAXIAL)

(DCM-370 only)

Connect a commercially available 75 Ω /ohms pin-plug cord.

Digital data is output from this connector.

Continuous Button Operation

If the automatic/manual search reverse button u or the automatic/manual search forward button i are held in, the function of that button will be repeated.

7

ENGLISH

OPENING AND CLOSING THE DRAWER AND LOADING A DISC

Opening and closing the drawer (This operation only works while the power is on.)

1.Press the power switch (POWER) to turn on the power.

2.Press the open/close button (5 OPEN/CLOSE).

How to load a disc

Make sure the drawer is completely open.

Hold the disc by the edges and place it on the disc tray. (Do not touch the signal surface, i.e., the glossy side.)

Set the disc properly in the tray according to its size. Set 8 cm discs in the center hole.

Set 12 cm discs in the outer hole.

When the drawer is opened during the stop mode, discs can be loaded in the 3 disc trays. If the DISC SKIP button is pressed, the carousel turns and a disc can be loaded in the another disc tray.

When the drawer is opened during the play mode, it is possible to load and unload discs in all of the disc trays other than the one whose disc is currently playing. 3 discs can be replaced and press the DISC SKIP button to switch the other disc tray that can be replaced.

Press the open/close button (5 OPEN/CLOSE) to close the drawer.

DCM-370

1

 

 

 

 

 

 

 

2

 

 

1

2

3

4

 

3

¤‚⁄

‚‹ fi‚

5

6

7

8

 

5

13141516

 

4

 

 

9 101112

LOADING SYSTEM

LABEL SIDE

UP WARD

DCM-370

Caution:

The player will not operate properly and the disc may even be damaged if it is not set correctly.

If your finger should get caught in the drawer when it closes, press the open/close button (5 OPEN/CLOSE).

Do not place any foreign objects on the disc tray, and do not place more than one disc on the tray at a time. Otherwise malfunction may occur.

Do not push in the disc tray manually when the power is off as this may cause malfunction and damage the CD player.

Do not touch the carousel while it is turning. Also, do not turn the carousel by hand when it is stopped. Doing so could damage it.

5 DISC AUTOMATIC DISC LOADING SYSTEM

DCM-370

1

2

3

4

5 ¤

5 DISC AUTOMATIC DISC LOADING SYSTEM

Do not insert disc where indicated by arrow.

This could damage the internal mechanism in the unit.

DCM-370

1

 

 

 

 

 

 

 

2

 

 

1

2

3

4

 

3

¤‚⁄

‚‹ fi‚

5

6

7

8

 

5

13141516

 

4

 

 

9 101112

LOADING SYSTEM

8

ENGLISH

CONNECTIONS

(1)Connecting the Output Terminal

Connect one end of the connection cord supplied with the CD Player to the output terminals, left (L) and right (R) of the CD Player, and the other end to the CD, AUX or TAPE PLAY input terminals, left (L) and right (R), of the amplifier.

DCM-370/270

 

IN

OUT

COAXIAL

SYNCHRO

CONTROL

DIGITAL OUT

LINE OUT

VARIABLE

(3)SYNCHRO Jack Connections

Connect the SYNCHRO jack with a DENON cassette deck which is equipped with a SYNCHRO jack, then make a synchronized recording. Use the connection cord supplied with the cassette deck.

To make use of this function, also connect the output jacks and make the settings so that a recording can be made from the CD player to the cassette deck.

DCM-370/270

 

IN

OUT

COAXIAL

SYNCHRO

CONTROL

DIGITAL OUT

LINE OUT

VARIABLE

(Amplifier)

 

 

Power supply outlet

 

SIGNAL

 

SPEAKER SYSTEMS

(Cassette Deck)

Power supply outlet

GND

 

 

 

 

 

 

R

L

 

INPUTS

PB

REC

A

 

PHONO CD TUNER AUX

TAPE-1 TAPE-2

TAPE-1 TAPE-2

 

 

 

/DAT /MD

/DAT /MD

 

 

L

 

L

 

 

 

 

 

B

 

R

 

R

 

 

AC OUTLET

(2)Connecting the Digital Output Jack (COAXIAL) (DCM-370 only)

Use a 75 Ω /ohm pin cord to connect the digital output jack (COAXIAL) of the DCM-370 to the digital input jack (COAXIAL) on a digital processor or MD recorder, available in stores.

DCM-370/270

 

IN

OUT

COAXIAL

SYNCHRO

CONTROL

DIGITAL OUT

LINE OUT

VARIABLE

Digital processor or MD recorder

Power supply outlet

DIGITAL INPUT

COAXIAL

OPTICAL

NORMAL PLAY

Follow the steps below to get an understanding of the disc play procedure.

(1) Starting Playback

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

1

 

 

 

 

 

 

 

STOP

PAUSE

PLAY

 

2

TRACK

 

 

1

2

3

4

 

 

 

 

3

DISC

MIN

SEC

5

6

7

8

 

 

 

 

5

¤‚⁄

‚‹ fi‚

13141516

 

 

 

 

4

 

 

 

9 101112

 

 

 

OPEN/CLOSE

5 DISC AUTOMATIC DISC LOADING SYSTEM

PHONES

( 1 PLAY )

1.Turn the power switch on and press the open/close (5 OPEN/CLOSE) button to open the drawer.

2.Set the disc to be played in the front side tray.

3.Press the play button (1).

4.The drawer closes and the disc just loaded is played.

5.The disc number, track number and elapsed time, etc., for the disc currently playing appear on the display window.

6.If the open/close (5 OPEN/CLOSE) button is pressed while a disc is playing, playback continues, but the drawer opens and four discs can be replaced. The disc that can be replaced switches when the DISC SKIP button is pressed.

Press the open/close (5 OPEN/CLOSE) button again to close the drawer.

(2) Stopping Playback

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

1

 

 

 

 

 

 

 

 

STOP

PAUSE

PLAY

2

TRACK

 

 

 

 

 

REPEAT

PROG

 

 

 

1

2

3

4

 

 

 

 

 

3

DISC

MIN

SEC

5

6

7

8

 

 

 

 

 

5

¤‚⁄

‚‹ fi‚

13141516

 

 

 

 

 

4

 

 

 

9 101112

 

 

 

 

OPEN/CLOSE DISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

PHONES

( 2 STOP )

1.Press the stop button (2 STOP) to stop playback.

2.To replace discs, press the open/close (5 OPEN/CLOSE) button.

The disc which was playing switches over to the front side and the drawer opens.

Set the disc you want to played in the front side.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

 

 

1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

 

1

2

3

4

 

 

 

 

 

 

 

 

3

¤‚⁄

‚‹ fi‚

5

6

7

8

 

 

 

 

 

 

 

 

5

13141516

 

 

 

 

 

 

 

 

4

 

 

9 101112

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LOADING SYSTEM

9

ENGLISH

OTHER PLAY METHODS

In addition to normal play, the following methods can be used when playing a disc.

qTo Play the Desired Disc and

Desired Track ……………………………………………… Direct Selection

(Remote control only)

1 ( DISC SELECT )

eTo Move to the Next Track

during Play ……………………………………………… Automatic Search

Press the Automatic/Manual search forward button (7/9) for less than 0.5 seconds during playback.

The pickup will advance to the beginning of the next track and playback will continue. Pressing the button several times will forward the pickup the corresponding number tracks.

3

( 1 ~ 10 )

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

1

 

 

 

9 101112

 

STOP

PAUSE

PLAY

4

 

 

 

PROG

 

 

2

TRACK

 

 

1 2 3 4

 

 

 

 

 

 

3

DISC

MIN

SEC

5 6 7 8

 

 

 

 

 

 

5

¤‚⁄

‚‹ fi‚ 13141516

 

 

OPEN/CLOSE

 

 

 

 

 

 

 

 

 

 

 

DISC SKIP

 

 

 

5 DISC AUTOMATIC DISC LOADING SYSTEM

 

 

 

 

2 ( 1 ~ 5 )

PHONES

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

( 7/9 )

Press the 7/9 button.

1.Press the DISC SELECT button.

2.Use the number buttons (1 to 5) to select the number of the disc to be played.

3.Next, use the number buttons (1 to 10 and +10) to select the number of the track to be played.

• For example, to play the 4th track on the 3rd disc:

Press DISC SELECT , 3 and 4 .

To play the 12th track on the 5th disc:

Press DISC SELECT , 5 , +10 and 2 .

Playback begins from the number of the disc and track selected.

wTo Move to the Next Disc

During Playback …………………………………………………… Disc Skip

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

 

 

1

 

 

 

 

 

 

 

 

 

 

 

STOP

PAUSE

PLAY

 

 

 

2

TRACK

 

 

1

2

3

4

 

 

 

 

 

 

 

 

 

 

 

3

DISC

MIN

SEC

5

6

7

8

 

 

 

 

 

 

 

 

 

 

 

5

¤‚⁄

‚‹ fi‚

13141516

 

 

 

 

 

 

 

 

 

 

 

4

 

 

 

9 101112

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPEN/CLOSE

DISC SKIP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5 DISC AUTOMATIC DISC LOADING SYSTEM

PHONES

( DISC SKIP )

1.Press the disc skip button. The carousel in the drawer turns and the disc on the next tray is played.

For example, if disc number 3 was playing, the disc switches to disc number 4, and if disc number 5 was playing, the disc switches to disc number 1.

2.In addition, when the Disc Skip – button on the remote control unit is pressed, the carousel turns in the opposite direction and the previous disc is played.

( DISC SKIP – )

2nd Track

3rd Track

4th Track

During Random or Program operation, player moves to the beginning of the next random or program track selection.

r To return to the beginning of the

track now being played ……………………………… Automatic Search

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

1

 

 

 

 

 

 

 

 

STOP

PAUSE

PLAY

2

TRACK

 

 

 

 

 

REPEAT

PROG

 

 

 

1

2

3

4

 

 

 

 

 

3

DISC

MIN

SEC

5

6

7

8

 

 

 

 

 

5

¤‚⁄

‚‹ fi‚

13141516

 

 

 

 

 

4

 

 

 

9 101112

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPEN/CLOSE

DISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

PHONES

( 8/6 )

Press the Automatic/Manual search reverse button (8/6) for less than 0.5 seconds during playback.

The pickup will return to the beginning of the current track and playback will continue. Pressing the button several times will return the pickup the corresponding number tracks.

Press the 8/6 button.

3rd Track

4th Track

5th Track

tTo Play the Desired Discs and the Desired Tracks in the

Desired Order ………………………………………… Program Selection

You can play certain tracks on the loaded discs in any order.

Tracks on a disc not loaded can also be programmed, but if you try to play that disc, the microprocessor detects that it is not loaded and the following disc is played automatically.

Up to 32 tracks can be set in a program.

10

(1) Programming (when using the remote control unit)

1 ( PROG / DIRECT )

2 ( DISC SELECT )

 

4 ( 1 ~ 10 )

3

( 1 ~ 5 )

Press the PROG/DIRECT button. The PROGRAM indicator lights. Use the DISC SELECT, number and +10 buttons to select the disc to be

programmed.

For example, to program the 3rd track on the 2nd disc and the 12 track on the 5th disc, press PROG/DIRECT , DISC SELECT , 2 , 3 , DISC SELECT , 5 ,

+10 and 2 .

(2) Programming (when using the buttons on the main unit)

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

1

 

 

 

 

 

 

 

 

STOP

PAUSE

PLAY

2

TRACK

 

 

 

 

 

REPEAT

PROG

 

 

 

1

2

3

4

 

 

 

 

 

3

DISC

MIN

SEC

5

6

7

8

 

 

 

 

 

5

¤‚⁄

‚‹ fi‚

13141516

 

 

 

 

 

4

 

 

 

9 101112

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OPEN/CLOSE

DISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

PHONES

( PROG )

Press the PROGRAM (PROG) button. The PROGRAM indicator flashes. Use the DISC SKIP, Automatic/Manual search reverse (8/6), Automatic/Manual search forward (7/9) buttons to select the disc to be programmed.

For example, to program the 3rd track on the 2nd disc and the 12 track on the 5th disc, press the PROGRAM (PROG) button, DISC SKIP button to select the 2nd disc, Automatic/Manual search reverse (8/6) or Automatic/Manual search forward (7/9) button to select the 3rd track, then press the PROGRAM (PROG) button.

In the same way, select the 12th track on the 5th disc using the DISC SKIP and Automatic/Manual search buttons, then press the PROGRAM (PROG) button.

(3) To Check the Programmed Tracks (Remote control only)

( CALL )

Press the call button on the wireless remote control unit.

The contents of the program are displayed in order one item at a time each time the Call button is pressed.

ENGLISH

(4) To Play a Program

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

1

 

 

 

 

 

 

 

STOP

PAUSE

PLAY

 

2

TRACK

 

 

1

2

3

4

 

 

 

 

3

DISC

MIN

SEC

5

6

7

8

 

 

 

 

5

¤‚⁄

‚‹ fi‚

13141516

 

 

 

 

4

 

 

 

9 101112

 

 

 

OPEN/CLOSE

5 DISC AUTOMATIC DISC LOADING SYSTEM

PHONES

( 1 PLAY )

( 1 PLAY )

Press the Play (1 PLAY) button to play the programmed selections in the order in which they were programmed.

(5) To clear the entire program

Pressing the PROG/DIRECT button once more erases the entire program. Pressing the open/close (5 OPEN/CLOSE) button also erases the contents of a program.

Pressing the PROG/DIRECT button while a program is being played cancels the program. Play will then be continuous to the end of the disc currently being played, after which the player will stop automatically.

Cautions

If a program is run during playing of a track or from the Pause state, the track which is currently being played becomes the 1st track in the program.

Direct selection cannot be done while a program is being played. Inputting the track number of a desired track with the Track Number buttons adds the input track to the end of the program.

When programming, do not program a track number which is not recorded on the disc. If such a number is programmed by mistake, the player ignore the program.

y To Repeat Play of All Tracks ………………………………… Repeat Play

• Press the Repeat (REPEAT) button. The REPEAT

indicator will light up.

Steps q and w can be done in any order, with the same results.

PCM AUDIO TECHNOLOGY / CD AUTO CHANGER DCM-370

1

 

 

 

 

 

STOP PAUSE PLAY

2

TRACK

 

 

 

REPEAT PROG

 

1

2

3

4

 

 

3

DISC

MIN SEC 5

6

7

8

 

 

5

¤‚⁄

‚‹ fi‚ 13141516

 

 

4

 

9 101112

 

OPEN/CLOSE DISC SKIP

5 DISC AUTOMATIC DISC LOADING SYSTEM

PHONES

 

2

 

1

 

( 1 PLAY )

( REPEAT )

When the repeat button is pressed once, the REPEAT and 1 indicators light. In this mode, the track currently playing is repeated.

REPEAT

REPEAT 1

Track

Track

 

Track

 

 

 

 

 

 

 

 

 

 

 

 

11

ENGLISH

• If the repeat button is pressed again, the REPEAT and 1 DISC indicators light, and the disc currently playing is repeated.

 

REPEAT

 

REPEAT

 

 

1 DISC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1st disc

2nd disc

 

 

 

 

5th disc

(ALL TRACKS)

(ALL TRACKS)

 

 

 

(ALL TRACKS)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the repeat button is pressed again, the REPEAT , ALL and DISC indicators light, and all the discs currently loaded are repeated.

 

REPEAT

REPEAT

 

ALL

 

DISC

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1st disc

2nd disc

 

 

 

 

5th disc

(ALL TRACKS)

(ALL TRACKS)

 

 

 

(ALL TRACKS)

 

 

 

 

 

 

 

 

 

 

Pressing the Repeat (REPEAT) button during play will also cause the player to repeat play (of all tracks).

To cancel repeat play, press the Repeat (REPEAT) button once more.

Pressing the Repeat (REPEAT) button while a program is being played will cause the tracks in the program to be played again in order.

Pressing the Repeat (REPEAT) button during Random play will cause the tracks to be played again at random.

uLetting the Player Select the

Order of Play ………………………………………………… Random Play

(Remote control only)

(1) Full Random Play

( RANDOM ) 1

( 1 PLAY ) 2

Press the Random button, then press the Play button. The microcomputer will then start play of the tracks on the 5 discs at random.

(2) Program Random Play

1

( RANDOM )

5

( 1 ~ 5 ) 3

2

( 1 ~ 10 ) 4

( PROG / DIRECT )

( DISC SELECT )

( 1 PLAY ) 6

After pressing the PROG/DIRECT button and inputting a program (See item t on page 10 and 11), press the Random button, then the Play button. The

microcomputer will then select tracks from the program at random and play them.

(3) Disc Sequential Random Play

( RANDOM ) 1

2 ( DISC SELECT )

 

( 1 ~ 5 )

3

( 1 PLAY )

4

Press the RANDOM button and specify the disc numbers (1 to 5) with the DISC SELECT button and the number buttons. A press of the PLAY (1 PLAY) button will result in the player randomly selecting and playing tracks on the disc in the order of specified discs.

Up to 5 discs can be selected, and the same disc can be selected, two or more times. Disc sequential random play is cancelled when play ends.

(4) To Cancel Random Play

Pressing the Random button once more cancels the Random function. Play will then proceed from the track currently being played to the end of the last track on the disc, then stop.

Pressing the open/close (5 OPEN/CLOSE) button also cancels the Random function.

Cautions

Pressing the Random button during normal play starts full random play.

Pressing the Random button during Program play starts random play of the tracks in the program, including the tracks which have already been played.

During random play, the player may display the number of disc which is not loaded in the tray. In such a case, the player will read the disc information, then reset automatically to correct. This is not a malfunction.

12

Loading...
+ 26 hidden pages