Grab Bars
5600 & 5700 Series
3" DIA
76 mm
2-1/6"
52 mm
SERIES
NO.
5600
MATERIALS: 5600 (1-1/2" O.D.) and 5700 (1-1/4" O.D.) tubing is (19 gauge) type 304 stainless steel with #4 satin finish. Wall Flanges
are (14 gauge) type 304 stainless steel. Snap lock cover flanges are (20 gauge) stainless steel with #4 satin finish.
Wall flanges are heliarc welded to tubing.
INSTALLATION: Install grab bar with 3 - #10 x 2-1/2" pan head stainless steel screws provided for each end wall flange and 2 - #10 x 2-1/2" pan head
stainless steel screws provided for each center wall flange. Slide cover flanges over wall flanges and press firmly to complete installation.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces. If wood blocking is not available, the following fasteners are suggested:
Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
Note: 5600 and 5700 series grab bars are engineered to meet 1000 lb. pull (500 lb. pull for 5700PB series) when properly installed.
5600 and 5700 series meet ADA, and ANSI (A117.1-2003) for form and load bearing requirements.
SPECIFICATION: Surface mounted grab bar shall be model__________________________
(fill in model number) by Liberty Hardware
DIM "A"
1-1/2" O.D.
1-1/4" O.D.5700
12"
(305 mm)
16"
(406 mm)
18"
(457 mm)
24"
(609 mm)
30"
(762 mm)
®
Manufacturing Corporation.
(812 mm)
32"
"A"
36"
(914 mm)
42"
(1066 mm)
56425636563256305624561856165612
57425736573257305724571857165712
48"
(1219 mm)
5648
5748
1-1/2"
38 mm
Dimensions shown are flange
center to center distance.
Loading...