http://www.delta.com.tw/industrialautomation/
Terminal Panels Series!
Instruction Sheet
Warning
3Please read this instruction carefully before use.
3Switch off the power before wiring.
3The display panel of TP02 series is waterproof. But please prevent grease, corrosive liquids and sharp objects from contacting the TP02 series.
3The TP02 series require 24VDC input power. DO NOT connect input AC power supply to any of the RS-485 communication port; otherwise serious damage may occur. Check all the wiring again before switching on the power.
3DO NOT touch any terminal when the power is switched on. DO NOT touch any internal circuit in 1 minute after the power is switched off.
3Make sure the groud terminal 
is correctly grounded in order to prevent electromagnetic interference.
3Please use the fixed support accessory which is packed together with the product provided by Delta. DO NOT tighten the screws out of the normal torque specifications; otherwise serious damage may occur.
X Introduction
1.1 Model Explanation
Thank you for choosing Delta TP Series. TP02G-AS1 has the features of high resolution 160×32 dots. It provides multilingual display and two built-in communication ports, one is for RS-232 and the other is for RS-485. RS-232 and RS-485 can be used simultaneously. Besides, it also supports communication and alarm LED indicators. The user can purchase program copy card (optional) to copy settings and programs quickly and save download time.
Nameplate Explanation
Production model |
|
MODEL : |
|
|
|
|
|
|
TP02G-AS1 |
|
|
|
|
|
|
|
|
|
|||||||||||
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||
Power input spec. |
|
POWER INPUT : 24Vdc 3W |
|
|
|
|
|
|
|
|
|
||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||
Barcode and |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
serial number |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Version |
|
VX.XX |
|
|
TP02GAS1W6050004 |
||||||||||||||||||||||||
|
|
|
|
|
|
||||||||||||||||||||||||
|
|
DELTA ELECTRONICS, INC |
MADE IN XXXXXXX |
||||||||||||||||||||||||||
NOTE: The words of “MADE IN XXXXX” will be different due to the manufacturing location. Please refer to the actual product for exact description.
Model / Serial No. Explanation
|
TP 02 G - AS 1 |
|
|
TP02GAS |
1 W 6 05 0004 |
||||||||||||||||||||||
|
|
|
|
|
|
|
|
Reserved |
|
|
|
|
|
|
|
|
|
|
|
Production serial number |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Production weeks |
||||||||
|
|
|
|
|
|
|
|
Reserved |
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
T: Text mode |
|
|
|
|
|
|
|
|
|
|
|
Production year (2006) |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
G: Graphic mode |
|
|
|
|
|
|
|
|
|
|
|
Production plant |
|||||||
|
|
|
|
|
|
|
|
LCD Spec. |
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(W: Wuijang; T: Taoyuan) |
||||||||
|
|
|
|
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
Series name |
|
|
|
|
|
|
|
|
|
|
|
Version |
|||||||
|
|
|
|
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||
1.2 |
Product Outline |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Production model |
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Alarm LED Indicator |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RS-232 LED Indicator |
|||
|
|
Displaying Area |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RS-485 LED Indicator |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Function Keys |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
Escape / Exit Key |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Arrow Keys |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Enter Key |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
1.3 |
Panel Function Explanation |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
||||||||||||||||||||||
PANEL COMPONENT |
|
|
|
|
EXPLANATION |
||||||||||||||||||||||
|
Alarm LED Indicator |
|
Status 1: When power is on, LED will blink slowly for three times. |
||||||||||||||||||||||||
|
|
Status 2: When there is an abnormal situation, LED will blink quickly along with |
|||||||||||||||||||||||||
|
|
(RED) |
|
||||||||||||||||||||||||
|
|
|
an alarm sound. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
RS-232 LED Indicator |
|
LED will blink when transmits program and communicates via RS-232. |
||||||||||||||||||||||||
|
|
(Yellow) |
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
RS-485 LED Indicator |
|
LED will blink when communicates via RS-485. |
||||||||||||||||||||||||
|
|
(Green) |
|
||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
Displaying Area |
|
Liquid Crystal Module display area. It is used to display current program status. |
||||||||||||||||||||||||
PANEL COMPONENT |
|
EXPLANATION |
Escape / Exit Key |
|
It is used to cancel an incorrect input, or to exit a programming step. |
Enter Key |
|
It is used to input a value or accept a programming command. |
|
|
UP / Pg Up: It is used to increase the value or move up one page. |
|
|
Pg Dn / DOWN: It is used to decrease the value or move down one page. |
Arrow Keys |
|
Left: This key is left direction key and it can be used to select the position of the |
|
value. |
|
|
|
|
|
|
Right: This key is right direction key and it can be used to select the position of |
|
|
the value. |
|
|
F0 / 0: It is used as a constant 0, or the user can define it as function F0. |
|
|
F1 / 1: It is used as a constant 1, or the user can define it as function F1. |
|
|
F2 / 2: It is used as a constant 2, or the user can define it as function F2. |
|
|
F3 / 3: It is used as a constant 3, or the user can define it as function F3. |
Function Keys |
|
F4 / 4: It is used as a constant 4, or the user can define it as function F4. |
|
F5 / 5: It is used as a constant 5, or the user can define it as function F5. |
|
|
|
|
|
|
F6 / 6: It is used as a constant 6, or the user can define it as function F6. |
|
|
F7 / 7: It is used as a constant 7, or the user can define it as function F7. |
|
|
F8 / 8: It is used as a constant 8, or the user can define it as function F8. |
|
|
F9 / 9: It is used as a constant 9, or the user can define it as function F9. |
1.4 Back Panel
RS-232
Extension port
5 PIN terminal / Wire gauge: 12-24 AWG / Torque: 4.5 lb.-inch
1.5 Dimension
Front panel (unit: mm [inch])
Right side diagram (unit: mm [inch]) |
Back panel |
Mounting dimension (unit: mm [inch])
85
[3.35]
135~136.5[5.31~5.37] Thickness Range 0.5~9mm
Vertical view (Unit: mm)
1.6 Installation
Please insert TP02 series to the opening hole of panel and tighten the screws. However, if a firm mounting TP02 series to the panel is needed, please use the mounting fixed support accessory which is packed together with TP02 series, then insert the fixed support in the back and tighten the screws.
If the fixed support is not installed well, Delta will not guarantee the waterproof function. The screw torque should be 4-5(kg-cm). DO NOT exceed this specification when tightening the screws; otherwise TP02 series may be damaged. Please leave sufficient space (more than 50mm) around the unit for heat dissipation.
Do not install and mount TP02 series in the following environment.
hA location subjected to Airborne dust, metallic particles, oil and smoke, corrosive or flammable gases and liquids.
h A location where temperature and humidity will exceed specifications.
hA location where vibration and shock will exceed specifications.
The flat surface should be a UL Type 4 "Indoor Use Only" enclosure or equivalent (IP65 / NEMA4). Please refer to the figures below.
Thickness: 0.5~9.0mm
Y Function Specifications
ITEM |
|
|
TP02G-AS1 |
Screen Type |
|
STN-LCD |
|
Display Color |
|
|
Monochromatic |
|
|
||
Backlight |
|
The back-light automatic turn off time is 1 ~ 99 minutes (0 = do not turn off) |
|
|
(The back-light life is about 50 thousand hours at 25°C) |
||
|
|
|
|
Resolution |
|
160 x 32 dots |
|
Display Range |
|
(W) x (H) = 72 x 22 (unit: mm) |
|
Contrast Adjustment |
|
15 levels of adjustment |
|
|
|
|
ASCII: Alphanumeric (including European characters) |
Language / Font |
|
Taiwan: (Big 5 codes) Traditional Chinese Fonts |
|
|
|
|
China: (GB2324-80 codes) Simplified Chinese Fonts |
Font Size |
|
|
ASCII: 5 × 8, 8 × 8, 8 × 12, 8 × 16 |
|
|
|
1. Power on indication (Blink for three times) |
Alarm LED Indicator (RED) |
|
2. Communication error alarm |
|
|
|
|
3. Special indication by user programming |
RS-232 LED Indicator |
|
It will blink when transmitting program and communicating by using RS-232. |
|
(Yellow) |
|
||
|
|
||
RS-485 LED Indicator |
|
It will blink when communicating by using RS-485. |
|
(Green) |
|
||
|
|
||
Program Memory |
|
256KB flash memory |
|
|
|
|
Unsynchronized transmission method: RS-232 |
Serial Communication Port |
|
Data length: 7 or 8 bits, Stop bits: 1 or 2 bits |
|
RS-232 (COM1) |
|
Parity: None/Odd/Even, Transmission speed: 4,800bps ~115,200bps |
|
|
|
|
RS-232: 9 PIN D-SUB male |
Extension Communication |
|
|
Unsynchronized transmission method: RS-485 |
|
|
Data length: 7 or 8 bits, Stop bits: 1 or 2 bits |
|
Port |
|
|
|
|
|
Parity: None/Odd/Even, Transmission speed: 4,800bps ~115,200bps |
|
RS-485 (COM2) |
|
|
|
|
|
RS-485: 5 PIN removal terminal |
|
|
|
|
|
Extension Interface |
|
1. Update firmware version |
|
|
|
|
2. The slot for program copy card |
Battery Cover |
|
|
DC 3V battery for HMI |
5 PIN Removal Terminal |
|
Include DC 24V input and RS-485 communication input |
|
Loading...