Dell™ IN1930/IN2030M Monitor User's Guide
About Your Monitor
Setting Up the Monitor
Operating the Monitor
Troubleshooting
Appendix
Notes, Cautions, Warnings
NOTE: A NOTE indicates important information that helps you make better use of your computer.
CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed.
WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2011 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
Model IN1930f/IN2030Mf/IN1930c/IN2030Mc
February 2011 Rev. A00
Back to Contents Page
About Your Monitor
Dell™ IN1930/IN2030M Monitor User's Guide
Package Contents
Product Features
Identifying Parts and Controls
Monitor Specifications
Plug and Play Capability
LCD Monitor Quality & Pixel Policy
Maintenance Guidelines
Package Contents
Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing.
NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.
• Monitor
• Stand Riser
• Stand Base
• Power Cable
• VGA Cable (attached to the monitor)
•Drivers and Documentation media
•Quick Setup Guide
•Product Information Guide
Product Features
The Dell™ IN1930/IN2030M flat panel display has an active matrix, Thin-Film Transistor, Liquid Crystal Display. The monitor's features include:
■IN1930: 47.0 cm (18.5 inches) viewable area display. 1366 x 768 resolution, plus full-screen support for lower resolutions.
■IN2030M: 50.8 cm (20.0 inches) viewable area display. 1600 x 900 resolution, plus full-screen support for lower resolutions.
■Tilt adjustment capability.
■Removable pedestal and Video Electronics Standards Association (VESA) 100 mm mounting holes for flexible mounting solutions.
■Plug and play capability if supported by your system.
■On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.
■Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation.
■ENERGY STAR compliant.
■Security lock slot.
■EPEAT™ Silver compliant.
■RoHS compliant.
Identifying Parts and Controls
Front View
1.Function buttons (For more information, see Operating the Monitor)
2.Power On/Off button (with LED indicator)
Back View
Label |
Description |
Use |
|
|
|
1 |
Barcode serial number label |
Refer to this label if you need to contact Dell for technical support. |
2 |
Regulatory rating label |
Lists the regulatory approvals. |
|
|
|
3 |
VESA mounting holes (100 mm) |
To mount the monitor. |
|
|
|
4 |
Security lock slot |
Use a security lock with the slot to help secure your monitor. |
|
|
|
5 |
Dell soundbar mounting brackets |
To attach the optional Dell Soundbar. |
|
|
|
Side View
Right Side
Bottom View
IN1930: |
IN2030M: |
|
|
Label |
Description |
Use |
|
|
|
1 |
AC power connector |
To connect the monitor power cable. |
|
|
|
2 |
VGA connector |
To connect your computer to the monitor using a VGA cable. |
|
|
|
Label |
Description |
U |
1 |
AC power connector |
To |
|
|
|
2 |
DVI connector |
To |
|
|
|
3 |
VGA connector |
To |
|
|
|
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
Power Management Modes
If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling o
IN1930:
VESA Modes |
Horizontal Sync |
Vertical Sync |
Video |
Power Indicator |
Power Consumption |
|
|
|
|
|
|
Normal operation |
Active |
Active |
Active |
White |
22 W (Maximum) |
|
|
|
|
|
18 W (Typical) |
|
|
|
|
|
|
Active-off mode |
Inactive |
Inactive |
Blank |
Amber |
Less than 1 W |
|
|
|
|
|
|
Switch off |
- |
- |
- |
Off |
Less than 0.5 W |
|
|
|
|
|
|
IN2030M: |
|
|
|
|
|
|
|
|
|
|
|
VESA Modes |
Horizontal Sync |
Vertical Sync |
Video |
Power Indicator |
Power Consumption |
|
|
|
|
|
|
Normal operation |
Active |
Active |
Active |
White |
25 W (Maximum) |
|
|
|
|
|
20 W (Typical) |
|
|
|
|
|
|
Active-off mode |
Inactive |
Inactive |
Blank |
Amber |
Less than 1 W |
|
|
|
|
|
|
Switch off |
- |
- |
- |
Off |
Less than 0.5 W |
|
|
|
|
|
|
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be dis
Activate the computer and monitor to gain access to the OSD.
NOTE: Dell IN1930/IN2030M monitor is ENERGY STAR®-compliance.
*Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
**Maximum power consumption with max luminance and contrast.
Pin Assignments
15-pin D-Sub connector
Pin Number Monitor Side of the 15-pin Side Signal Cable
1Video-Red
2Video-Green
3Video-Blue
4GND
5Self-test
6GND-R
7GND-G
8GND-B
9DDC +5 V
10GND-sync
11GND
12DDC data
13H-sync
14V-sync
15DDC clock
DVI Connector
Pin |
24-pin Side of the Connected Signal |
Number |
Cable |
1TMDS RX2-
2TMDS RX2+
3TMDS Ground
4Floating
5Floating
6DDC Clock
7DDC Data
8Floating
9TMDS RX1-
10TMDS RX1+
11TMDS Ground
12Floating
13Floating
14+5 V power
15Self test
16Hot Plug Detect
17TMDS RX0-
18TMDS RX0+
19TMDS Ground
20Floating
21Floating
22TMDS Ground
23TMDS Clock+
24TMDS Clock-
Plug and Play Capability
You can install the monitor in any Plug and Play compatible system. The monitor automatically provides the computer with its Extended Display Identification Dat system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.
Flat Panel Specifications
Model number |
Dell IN1930 monitor |
Dell IN2030M monitor |
||
|
|
|
||
Screen type |
Active matrix - TFT LCD |
Active matrix - TFT LCD |
||
|
|
|
||
Panel Type |
TN |
TN |
||
|
|
|
|
|
Screen dimensions |
47.0 cm (18.5 inches) (18.5-inch wide |
50.8 cm (20 inches) (20-inch wide |
||
viewable image size) |
viewable image size) |
|||
|
|
|||
Preset display area: |
|
|
||
• |
Horizontal |
409.8 mm (16.14 inches) |
442.8 mm (17.43 inches) |
|
• |
Vertical |
230.4 mm (9.07 inches) |
249.1 mm (9.81 inches) |
|
|
|
|
||
Pixel pitch |
0.300 mm |
0.277 mm |
||
|
|
|
||
Viewing angle: |
|
|
||
• |
Horizontal |
170 ° typical |
170 ° typical |
|
• |
Vertical |
160 ° typical |
160 ° typical |
|
|
|
|
||
Luminance output |
250 cd/m² (typical) |
250 cd/m² (typical) |
||
Contrast ratio |
1000 to 1 (typical) |
1000 to 1 (typical) |
||
|
|
|
||
Dynamic Contrast Ratio |
8,000,000 to 1 (typical) * |
8,000,000 to 1 (typical) * |
||
|
|
|
||
Faceplate coating |
Antiglare with hard-coating 3H |
Antiglare with hard-coating 3H |
||
|
|
|
||
Backlight |
LED light bar system |
LED light bar system |
||
|
|
|
||
Response Time |
5 ms typical (black to white) |
5 ms typical (black to white) |
||
|
|
|
||
Color Depth |
16.7 mil colors |
16.7 mil colors |
||
|
|
|
||
Color Gamut |
82 % (typical) ** |
82 % (typical) ** |
||
|
|
|
|
*Based on estimation.
**[IN1930/IN2030M] color gamut (typical) is based on CIE1976 (82 %) and CIE1931 (72 %) test standards.
Resolution Specifications
Model number |
Dell IN1930 monitor |
Dell IN2030M monitor |
|
|
|
|
|
|
|
Scan range |
|
|
|
|
• |
Horizontal |
30 kHz to 83 kHz (automatic) |
30 kHz to 83 kHz (automatic) |
|
• |
Vertical |
56 Hz to 75 Hz (automatic) |
56 Hz to 75 Hz (automatic) |
|
|
|
|
|
|
Maximum preset resolution |
1366 x 768 at 60 Hz |
1600 x 900 at 60 Hz |
|
|
|
|
|
|
|
|
|
|
|
|
Electrical Specifications
Model number |
Dell IN1930/IN2030M monitor |
Video input signals
Analog RGB: 0.7 Volts +/- 5 %, 75 ohm input impedance
Separate horizontal and vertical Synchronization input signals synchronizations, polarity-free TTL level, SOG
(Composite SYNC on green)
AC input voltage / frequency / current
100 VAC to 240 VAC/50 Hz or 60 Hz + 3 Hz/1.5 A (Max.)
Inrush current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Preset Display Modes
The following table lists the preset modes for which Dell guarantees image size and centering:
IN1930:
Display Mode |
Horizontal Frequency |
Vertical Frequency |
Pixel Clock (MHz) |
Sync Polarity |
|
|
(kHz) |
(Hz) |
|
(Horizontal/Vertical) |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 720 x 400 |
31.5 |
70.0 |
28.3 |
-/+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 640 x 480 |
31.5 |
60.0 |
25.2 |
-/- |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 640 x 480 |
37.5 |
75.0 |
31.5 |
-/- |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 800 x 600 |
37.9 |
60.0 |
40.0 |
+/+ |
|
|
|
|
|
|
|
VESA, 800 x 600 |
46.9 |
75.0 |
49.5 |
+/+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 1024 x 768 |
48.4 |
60.0 |
65.0 |
-/- |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 1024 x 768 |
60.0 |
75.0 |
78.8 |
+/+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 1280 x 1024 |
80.0 |
75.0 |
135.0 |
+/+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
VESA, 1366 x 768 |
47.7 |
60.0 |
85.5 |
+/+ |
|
|
|
|
|
|
|
|
|
|
|
|
|
IN2030M: |
|
|
|
|
|
|
|
|
|
|
|
Display Mode |
Horizontal Frequency |
Vertical Frequency |
Pixel Clock (MHz) |
Sync Polarity |
|
|
(kHz) |
(Hz) |
|
(Horizontal/Vertical) |
|
|
|
|
|
|
|
VESA, 720 x 400 |
31.5 |
70.1 |
28.3 |
-/+ |
|
|
|
|
|
|
|
VESA, 640 x 480 |
31.5 |
59.9 |
25.2 |
-/- |
|
|
|
|
|
|
|
VESA, 640 x 480 |
37.5 |
75.0 |
31.5 |
-/- |
|
|
|
|
|
|
|
VESA, 800 x 600 |
37.9 |
60.3 |
40.0 |
+/+ |
|
VESA, 800 x 600 |
46.9 |
75.0 |
49.5 |
+/+ |
|
|
|
|
|
|
|
VESA, 1024 x 768 |
48.4 |
60.0 |
65.0 |
-/- |
|
|
|
|
|
|
|
VESA, 1024 x 768 |
60.0 |
75.0 |
78.8 |
+/+ |
|
|
|
|
|
|
|
VESA, 1152 x 864 |
67.5 |
75.0 |
108.0 |
+/+ |
|
|
|
|
|
|
|
VESA, 1280 x 1024 |
64.0 |
60.0 |
108.0 |
+/+ |
|
|
|
|
|
|
|
VESA, 1280 x 1024 |
80.0 |
75.0 |
135.0 |
+/+ |
|
|
|
|
|
|
|
VESA, 1600 x 900 |
55.5 |
60.0 |
97.8 |
+/- |
|
|
|
|
|
|
|
|
|
|
|
|
|
Physical Characteristics
The following table lists the monitor's physical characteristics:
Model Number |
Dell IN1930 monitor |
Dell IN2030M monitor |
|
|
|
|
|
|
|
|
D-subminiature, blue connector; |
Connector type |
D-subminiature, blue connector |
|
|
|
|
|
DVI-D: White connector |
|
|
|
|
|
|
|
D-sub: Detachable, Analog, 15 pin, shipped |
Signal cable type |
Analog: Detachable, D-Sub, 15 pins, shipped |
attached to the monitor |
|
attached to the monitor |
|
||
|
|
|
|
|
|
|
DVI-D: Detachable, DVI-D, Solid pins (optional) |
|
|
|
|
Dimensions: (with stand) |
|
|
|
• |
Height |
349.10 mm (13.74 inches) |
367.78 mm (14.48 inches) |
• |
Width |
445.41 mm (17.54 inches) |
478.60 mm (18.84 inches) |
• |
Depth |
163.78 mm (6.45 inches) |
163.78 mm (6.45 inches) |
|
|
|
|
Dimensions: (without stand) |
|
|
|
• |
Height |
266.05 mm (10.47 inches) |
284.89 mm (11.22 inches) |
• |
Width |
445.41 mm (17.54 inches) |
478.60 mm (18.84 inches) |
• |
Depth |
52.30 mm (2.06 inches) |
52.30 mm (2.06 inches) |
|
|
|
|
Stand dimensions: |
|
|
|
|
|
|
|
• |
Height |
141.50 mm (5.57 inches) |
141.50 mm (5.57 inches) |
• |
Width |
236.33 mm (9.30 inches) |
236.33 mm (9.30 inches) |
• |
Depth |
163.78 mm (6.45 inches) |
163.78 mm (6.45 inches) |
|
|
|
|
Weight: |
|
|
|
Weight with packaging |
3.94 kg (8.69 lb) |
4.25 kg (9.37 lb) |
|
|
|
|
|
Weight with stand assembly and cables |
3.26 kg (7.19 lb) |
3.53 kg (7.78 lb) |
|
|
|
|
|
Weight without stand assembly |
|
|
|
(For wall mount or VESA mount |
2.64 kg (5.82 lb) |
2.91 kg (6.42 lb) |
|
considerations - no cables) |
|
|
|
|
|
|
|
Weight of stand assembly |
0.33 kg (0.73 lb) |
0.33 kg (0.73 lb) |
|
|
|
|
|
Environmental Characteristics
The following table lists the environmental conditions for your monitor:
|
Model Number |
Dell IN1930 monitor |
Dell IN2030M monitor |
|
|
|
|
|
|
|
|
|
Temperature |
|
|
|
|
|
• |
Operating |
0 ° C to 40 ° C (32 ° F to 104 ° F) |
0 ° C to 40 ° C (32 ° F to 104 ° F) |
|
|
• |
Non-operating |
Storage: -20 ° C to 60 ° C (-4 ° F to |
Storage: -20 ° C to 60 ° C (-4 ° F to |
|
|
|
|
140 ° F) |
140 ° F) |
|
|
|
|
Shipping: -20 ° C to 60 ° C (-4 ° F to |
Shipping: -20 ° C to 60 ° C (-4 ° F to |
|
|
|
|
140 ° F) |
140 ° F) |
|
|
Humidity |
|
|
|
|
|
|
Operating |
10 % to 80 % (non-condensing) |
10 % to 80 % (non-condensing) |
|
|
• |
|
|
|
|
|
|
Non-operating |
Storage: 5 % to 90 % (non- |
Storage: 5 % to 90 % (non- |
|
|
• |
condensing) |
condensing) |
|
|
|
|
|
Shipping: 5 % to 90 % (non- |
Shipping: 5 % to 90 % (non- |
|
|
|
|
condensing) |
condensing) |
|
|
|
|
|
|
|
|
Altitude |
|
|
|
|
|
• |
Operating |
4,485 m (14,700 ft) max |
4,485 m (14,700 ft) max |
|
|
• |
Non-operating |
12,191 m (40,000 ft) max |
12,191 m (40,000 ft) max |
|
|
|
|
|
|
|
|
Thermal dissipation |
75.09 BTU/hour (maximum) |
85.33 BTU/hour (maximum) |
|
|
|
61.43 BTU/hour (typical) |
68.26 BTU/hour (typical) |
|
||
|
|
|
|
||
|
|
|
|
|
|
LCD Monitor Quality & Pixel Policy
During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pix spot.When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.”
In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered norma
Support site at: support.dell.com.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Read and follow the safety instructions before cleaning the monitor.
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
•To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the cleaners, or compressed air.
•Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
•If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.
•Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.
•To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.
Back to Contents Page
Back to Contents Page
Appendix
Dell™ IN1930/IN2030M Monitor User's Guide
Safety Instructions
FCC Notice (U.S. Only) and Other Regulatory Information
Contacting Dell
WARNING: Safety Instructions
WARNING: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory Information
For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference
(2)this device must accept any interference received including interference that may cause undesired operation
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:
1.Visit support.dell.com.
2.Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.
3.Click Contact Us on the left side of the page.
4.Select the appropriate service or support link based on your need.
5.Choose the method of contacting Dell that is convenient for you.
Back to Contents Page
Back to Contents Page
Setting Up Your Monitor
Dell™ IN1930/IN2030M monitor
If you have a Dell™ desktop or a Dell™ portable computer with internet access
1.Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.
2.After installing the drivers for your graphics adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.
NOTE: If you are unable to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M), please contact Dell™ to inquire about a graphics adapter that supports these resolutions.
Back to Contents Page
Back to Contents Page
Setting Up Your Monitor
Dell™ IN1930/IN2030M monitor
If you have a non Dell™ desktop, portable computer, or graphics card
In Windows XP:
1.Right-click on the desktop and click Properties.
2.Select the Settings tab.
3.Select Advanced.
4.Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5.Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
6.After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.
In Windows Vista® or Windows 7:
1.Right-click on the desktop and click Personalization.
2.Click Change Display Settings.
3.Click Advanced Settings.
4.Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5.Please refer to the graphics card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
6.After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M) again.
NOTE: If you are unable to set the resolution to 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M), please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution of 1366 x 768 (for IN1930) or 1600 x 900 (for IN2030M).
Back to Contents Page