Dell D176P, E1910Hc User Manual

0 (0)

Dell™ E1910H Flat Panel Monitor User's Guide

About Your Monitor

Setting Up the Monitor

Operating the Monitor

Troubleshooting

Appendix

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Information in this document is subject to change without notice.

© 2009 Dell Inc. All rights reserved.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.; Microsoft and Windows are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model E1910Hc

March 2009 Rev. A00

Back to Contents Page

About Your Monitor

Dell™ E1910H Flat Panel Monitor User's Guide

Package Contents

Product Features

Identifying Parts and Controls

Monitor Specifications

Plug and Play Capability

LCD Monitor Quality & Pixel Policy

Maintenance Guidelines

Package Contents

Your monitor ships with all the components shown below. Ensure that you have received all the components and Contact Dell™ if anything is missing.

NOTE: Some items may be optional and may not ship with your monitor. Some features or media may not be available in certain countries.

Monitor

Stand

Power Cable

VGA Cable (attached to the monitor)

Drivers and Documentation media

Quick Setup Guide

Safety Information

Product Features

The Dell™ E1910H flat panel display has an active matrix, Thin-film Transistor, Liquid Crystal Display. The monitors features include:

Dell E1910H has a 18.5-inch (470.0 mm) viewable area display.

1366 x 768 resolution, plus full-screen support for lower resolutions.

Wide viewing angle to allow viewing from a sitting or standing position, or while moving from side-to-side.

Tilt adjustment capability.

Removable pedestal and Video Electronics Standards Association (VESA) 100mm mounting holes for flexible mounting solutions.

Plug and play capability if supported by your system.

On-Screen Display (OSD) adjustments for ease of set-up and screen optimization.

Software and documentation media which includes an information file (INF), Image Color Matching File (ICM), and product documentation.

Energy Saver feature for ENERGY STAR® compliance.

Security lock slot.

Halogen reduced.

Identifying Parts and Controls

Front View

1.Function buttons (For more information, see Operating the Monitor)

2.Power On/Off button (with LED indicator)

Back View

Label

Description

Use

 

 

 

1

Barcode serial number label

Refer to this label if you need to contact Dell for technical support.

2

Regulatory rating label

List the regulatory approvals.

 

 

 

3

VESA mounting holes (100mm)

To mount the monitor.

 

 

 

4

Security lock slot

Use a security lock with the slot to help secure your monitor.

 

 

 

5

Dell soundbar mounting brackets

To attach the optional Dell Soundbar.

 

 

 

Side View

Left Side

Right Side

 

 

Bottom View

Label

Description

Use

 

 

 

1

AC power connector

To connect the monitor power cable.

 

 

 

2

VGA connector

To connect your computer to the monitor using a VGA cable.

 

 

 

Dell D176P, E1910Hc User Manual

Monitor Specifications

The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.

Power Management Modes

If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as Power Save Mode. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:

VESA Modes

Horizontal Sync

Vertical Sync

Video

Power Indicator

Power Consumption

 

 

 

 

 

 

Normal operation

Active

Active

Active

Blue

19 W(Typical)

 

 

 

 

 

23 W(Max)

 

 

 

 

 

 

Active-off mode

Inactive

Inactive

Blank

Amber

Less than 1 W

 

 

 

 

 

 

Switch off

-

-

-

Off

Less than 1 W

 

 

 

 

 

 

The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed:

Activate the computer and monitor to gain access to the OSD.

NOTE: Dell E1910H Flat Panel monitor is TC003 and ENERGY STAR®-compliant.

Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments

15-pin D-Sub connector

Pin Number Monitor Side of the 15-pin Side Signal Cable

1Video-Red

2Video-Green

3Video-Blue

4GND

5Self-test

6GND-R

7GND-G

8GND-B

9DDC +5V

10GND-sync

11GND

12DDC data

13H-sync

14V-sync

15DDC clock

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer with its Extended Display Identification Dat (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings. Most monitor installations are automatic. You can select different settings if required.

Flat Panel Specifications

Model number

Dell E1910H Flat Panel Monitor

 

 

Screen type

Active matrix - TFT LCD

Panel Type

TN

 

 

 

Screen dimensions

18.5 inches

(18.5-inch wide viewable image size)

 

 

Preset display area:

 

Horizontal

409.8 mm (16.1 inches)

Vertical

230.4 mm (9.07 inches)

 

 

Pixel pitch

0.300 mm

 

 

Viewing angle:

 

Horizontal

160° typical

Vertical

160° typical

 

 

Luminance output

250 CD/m ²(typical)

 

 

Contrast ratio

1000 to 1 (typical)

 

 

Faceplate coating

Anti-glare

 

 

Backlight

2 CCFL edgelight system

 

 

Response Time

5ms typical

 

 

Color Gamut

83% (typical)*

 

 

 

*Dell E1910H Flat Panel monitor color gamut (typical) is based on CIE 1976 (83%) and CIE1931 (72%) test standards.

Resolution Specifications

Model number

Dell E1910H Flat Panel Monitor

 

 

 

 

Scan range

 

 

Horizontal

30 kHz to 83 kHz (automatic)

 

Vertical

56 Hz to 75 Hz (automatic)

 

 

 

 

Maximum preset resolution

1366 x 768 at 60 Hz

 

 

 

 

 

Electrical Specifications

Model number

Dell E1910H Flat Panel Monitor

Video input signals

Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance

Separate horizontal and vertical Synchronization input signals synchronizations, polarity-free TTL level, SOG

(Composite SYNC on green)

AC input voltage / frequency / current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.6A (Max.)

Inrush current

120V:30A (Max.) 240V:60A (Max.)

Preset Display Modes

The following table lists the preset modes for which Dell guarantees image size and centering:

Display Mode

Horizontal Frequency

Vertical Frequency

Pixel Clock (MHz)

Sync Polarity

 

 

(kHz)

(Hz)

 

(Horizontal/Vertical)

 

 

 

 

 

 

 

VESA, 720 x 400

31.5

70.0

28.3

-/+

 

 

 

 

 

 

 

VESA, 640 x 480

31.5

60.0

25.2

-/-

 

 

 

 

 

 

 

VESA, 640 x 480

37.5

75.0

31.5

-/-

 

 

 

 

 

 

 

VESA, 800 x 600

37.9

60.0

40.0

+/+

 

 

 

 

 

 

 

VESA, 800 x 600

46.9

75.0

49.5

+/+

 

 

 

 

 

 

 

VESA, 1024 x 768

48.4

60.0

65.0

-/-

 

 

 

 

 

 

 

VESA, 1024 x 768

60.0

75.0

78.8

+/+

 

 

 

 

 

 

 

VESA, 1366 x 768

47.7

60.0

85.5

+/+

 

 

 

 

 

 

 

 

 

 

 

 

 

Physical Characteristics

The following table lists the monitor physical characteristics:

Model Number

Dell E1910H Flat Panel Monitor

 

 

 

 

Connector type

15-pin D-subminiature, blue connector;

 

Signal cable type

Analog: Detachable, D-Sub, 15pins, shipped

 

attached to the monitor

 

 

 

 

 

 

 

Dimensions: (with stand)

 

 

Height

13.36 inches ( 339.3 mm)

 

Width

17.48 inches ( 444.0 mm)

 

Depth

6.13 inches ( 155.6 mm)

 

 

 

 

Dimensions: (without stand)

 

 

Height

10.42 inches ( 264.6 mm)

 

Width

17.48 inches ( 444.0 mm)

 

Depth

2.52 inches ( 64.0 mm)

 

 

 

 

Stand dimensions:

 

 

Height

4.91 inches ( 124.7 mm)

 

Width

9.84 inches ( 250.0 mm)

 

Depth

6.13 inches ( 155.6 mm)

 

 

 

 

Weight with packaging

12.10 lbs (5.50 kg)

 

 

 

 

Weight with stand assembly and cables

8.58 lbs ( 3.90 kg)

 

Weight without stand assembly

 

 

(For wall mount or VESA mount

7.04 lbs ( 3.20 kg)

 

considerations - no cables)

 

 

 

 

 

Weight of stand assembly

1.54 lbs ( 0.70 kg)

 

 

 

 

 

 

 

 

 

Environmental Characteristics

The following table lists the environmental conditions for your monitor:

Model Number

Dell E1910H Flat Panel Monitor

Temperature

 

Operating

0° to 40°C (32° to 104°F)

 

 

Non-operating

Storage: -20° to 60°C (-4° to 140°F)

 

 

Shipping: -20° to 60°C(-4° to 140°F)

 

 

Humidity

 

Operating

10% to 80% (non-condensing)

Non-operating

Storage: 5% to 90% (non-condensing)

 

 

Shipping: 5% to 90%(non-condensing)

 

 

Altitude

 

Operating

3,657.6m (12,000 ft) max

Non-operating

12,192m (40,000 ft) max

 

 

 

Thermal dissipation

71.82 BTU/hour (maximum)

64.98 BTU/hour (typical)

 

 

 

 

 

LCD Monitor Quality & Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.When the pixel remains permanently lit, it is known as a “bright dot.” When the pixel remains black, it is known as a “dark dot.”

In almost every case, these fixed pixels are hard to see and do not detract from display quality or usability. A display with 1 to 5 fixed pixels is considered norma and within competitive standards. For more information, see Dell Support site at: support.dell.com.

Maintenance Guidelines

Caring for Your Monitor

CAUTION: Read and follow the safety instructions before cleaning the monitor.

CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:

To clean your antistatic screen, slightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

Use a slightly dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.

If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor.

Handle your monitor with care as a darker-colored monitor may scratch and show white scuff marks more than a lighter-colored monitor.

To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.

Back to Contents Page

Back to Contents Page

Appendix

Dell™ E1910H Flat Panel Monitor User's Guide

Safety Instructions

FCC Notice (U.S. Only) and Other Regulatory Information

Contacting Dell

CAUTION: Safety Instructions

CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

For information on safety instructions, see the Product Information Guide.

FCC Notices (U.S. Only) and Other Regulatory Information

For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation

Contacting Dell

For customers in the United States, call 800-WWW-DELL (800-999-3355).

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1.Visit support.dell.com.

2.Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.

3.Click Contact Us on the left side of the page.

4.Select the appropriate service or support link based on your need.

5.Choose the method of contacting Dell that is convenient for you.

Back to Contents Page

Loading...
+ 20 hidden pages