Delfield SMR2-SL, SSR2, SAR2 User Manual

Standard Features

Delfield
™		®	Project ___________________________________
			Item _____________________________________
Specification Line®			Quantity _ ________________________________
			Date _____________________________________
			CSI Section 11400
			Approved _ _______________________________
Self-Contained Sliding Door Reach-In Refrigerator
Models
Solid door	Glass door
SSR2-SLS	SSR2-SLG	2 section stainless exterior and interior full sliding door
SSR2-SLSH	SSR2-SLGH	2 section stainless exterior and interior half sliding door
SAR2-SLS	SAR2-SLG	2 section stainless exterior and aluminum interior full sliding door
SAR2-SLSH	SAR2-SLGH	2 section stainless exterior and aluminum interior half sliding door
SMR2-SLS	SMR2-SLG	2 section stainless front aluminum exterior and interior full sliding door
SMR2-SLSH	SMR2-SLGH	2 section stainless front aluminum exterior and interior half sliding door

Options &

	•	Stainless steel interior and exterior (SS)	Accessories
	•	Stainless steel exterior, aluminum interior (SA)
	•	Aluminum interior and exterior, stainless front (SM)	•	Additional shelves
	•	Pressure relief valve is standard to prevent door
		vapor lock	•	Tray slides
	•	Exterior digital thermometer with high/low	•	Stainless steel back
		temperature alarm	•	Laminate on front, sides and back
	•	Easy access “flip up” shroud	•	Bottom mount electrical
	•	Easy to use electronic control	•	Stainless steel banking strip
	•	Three wire shelves per section - SA/SS standard	•	Heat shield end
		with chrome plated shelves and SM standard with	•	Stainless steel kick plate
		epoxy coated shelves	•	Laminate kick plate
	•	10’ attached cord and plug	•	4” stainless steel utility base
	•	6” adjustable stainless steel legs	•	220-60-1 electrical
	•	Stainless steel breaker strips	•	230-50-1 electrical
	•	Environmentally friendly 404a refrigerant	•	Security package
	•	High density foamed in place environmentally
		friendly, Kyoto Protocol Compliant, Non ODP
		(Ozone Depletion Potential), Non GWP (Global
		Warming Potential) polyurethane keeps energy
		costs low
	•	Energy savings door heater switch
SSR2-SLG	•	Fluorescent light with on/off switch (glass door
		units only)
	•	Two year parts & labor warranty
	•	Five year compressor warranty

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters affixed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling, the interior fluorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Doors:

Solid Sliding. Exterior and interior shall be corrosion resistant stainless steel.

Glass Sliding. Double thermopane glass set in high impact black plastic frame.

Doors are set in tracks for easy movement. Spring action assures self closing. Gasket seals both ends of doors. Doors are removable for cleaning.

Refrigeration system: All components are mounted to the exterior cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. System has the capability of maintaining between 27˚F and 40˚F in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reducing compressor cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60Hz, single phase. A 10’ cord and plug is supplied attached to a junction box mounted on the exterior top of the cabinet.

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	www.delfield.com
	Mt. Pleasant, Michigan 48858
		Fax: [phone]

Refrigerator In-Reach Door Sliding Line®: Specification