Delfield SMRRI1-S, SMRRI2-S, SSRRI2-S, SMRRI3-S, SARRI1-S User Manual

...
0 (0)
Delfield SMRRI1-S, SMRRI2-S, SSRRI2-S, SMRRI3-S, SARRI1-S User Manual

 

 

 

 

Project ___________________________________

 

 

 

 

Item _____________________________________

Specification Line®

Quantity _ ________________________________

Date _____________________________________

 

 

 

 

CSI Section 11400

 

 

 

 

Approved _ _______________________________

Self-Contained Solid Door Refrigerated Roll-In

 

 

 

 

 

 

 

Models

 

 

 

 

One section

Two section

Three section

 

 

SSRRI1-S

SSRRI2-S

SSRRI3-S

Stainless exterior and interior full door

 

SARRI1-S

SARRI2-S

SARRI3-S

Stainless exterior and aluminum interior full door

 

SMRRI1-S

SMRRI2-S

SMRRI3-S

Stainless front aluminum exterior and interior full door

 

Standard Features

 

• Stainless steel interior and exterior (SS)

 

• Stainless steel exterior, aluminum interior

 

(SA)

 

• Aluminum interior and exterior, stainless

 

front (SM)

 

• Built in door locks with heavy duty strikes

 

• Recessed metal door handle

 

• Pressure relief valve is standard to prevent

 

door vapor lock

 

• Exterior digital thermometer with high/low

 

temperature alarm

 

• Easy to use electronic control

 

• Easy access “flip up” shroud

 

• Tough ABS interior door liners

 

• 10’ attached cord and plug

 

• Stainless steel breaker strips

 

• High density foamed in place

 

environmentally friendly, Kyoto Protocol

 

Compliant, Non ODP (Ozone Depletion

 

Potential), Non GWP (Global Warming

 

Potential) polyurethane keeps energy costs

SSRRI2-S

low

• Energy savings door heater switch

 

 

• Two year parts & labor warranty

 

• Five year compressor warranty

Options &

Accessories

Security (prison) package

Door field rehingability

Stainless steel interior door liner

Stainless steel back

Laminate on front, sides and back

Bottom mount electrical

Stainless steel banking strip

Heat shield end

230-50-1 electrical

220-60-1 electrical

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without impacting aisle space. Keyed door lock is mounted in the door next

to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled

as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor

cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.

Electrical: Standard electrical connections shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet.

980 S. Isabella Rd.

Phone: 800-733-8948 or 989-773-7981

www.delfield.com

Mt. Pleasant, Michigan 48858

Fax: 800-669-0619

 

 

 

 

 

In-Roll Refrigerated Door Solid Line®: Specification

Loading...
+ 1 hidden pages