Delfield |
|
|
™ |
® |
Project ___________________________________ |
|
|
Item _____________________________________ |
ST4472N Salad Top |
Quantity _ ________________________________ |
|
Date _____________________________________ |
||
|
|
CSI Section 11400 |
|
|
Approved _ _______________________________ |
Front-Breathing Self-Contained Compact Salad Top Refrigerators
Models
•ST4472N-12 Two section with doors twelve pan capacity
•STD4472N-12 Two section with drawers twelve pan capacity
|
Standard Features |
|
|
• Patented air screen ensures product stays cold without |
|
|
drying it out |
|
|
• All 4400 Series units are 100% front breathing, which allows |
|
|
the unit to be pushed against a wall or built into a cabinet or |
|
|
an existing line up |
|
|
• Durable, rugged stainless steel sides, top and front |
|
|
• Features Delfield’s exclusive ABS interior (on sides). ABS |
|
|
is extremely durable - it won’t dent, chip or corrode and is |
|
|
backed by a limited lifetime warranty |
|
|
• Delfield supplies 1/6 size pans and adapter bars for top |
|
|
opening |
|
|
• Salad top refrigerators are standard with 10” wide, |
|
|
dishwasher safe polyethylene cutting board treated with |
|
|
anitmicrobial agent |
|
|
• “D” prefix models feature Delfield’s new drawer system. |
|
|
Drawers are backed by a 10-year warranty on the track |
|
|
assembly |
|
STD4472N-12 |
• Environmentally friendly R404A refrigerant |
|
• High density foamed in place environmentally friendly, Kyoto |
||
|
||
|
Protocol Compliant, Non ODP (Ozone Depletion Potential), |
|
|
Non GWP (Global Warming Potential) polyurethane keeps |
|
|
energy costs low |
|
|
• Black recessed quick grip handle |
|
|
• Standard on 2” casters for easy cleaning and installation |
|
|
• 7’ cord and plug supplied |
|
|
• One epoxy coated wire shelf standard, installed per door |
|
|
section |
|
|
• ACT solid state electronic control |
|
|
• "ST" models have a 4" stainless steel backsplash |
|
|
• One year parts and 90 day labor standard warranty. |
Options &
Accessories
•Flat lift off cover
•18” wide single tier overshelf
•Stainless steel finish on back
•Plastic laminate on front
•Additional wire shelves
•Door lock
•Exterior thermometer
•Glass door(s)
•*220V/50Hertzelectricalsystem *Inclusion of this option will alter electrical specifications of the unit.
Specifications
Exterior top is one-piece 22-gauge stainless steel with integral 2.12” |
ACT control. ACT electronic, solid state control, mounted on the exterior |
|
(5.1cm) square nosing at the front. Top has openings to accept 12 or 18 |
rear of the cabinet, allows unit to maintain precise temperatures in heavy |
|
1/6-size 4”- 6” (10.2cm - 15.2cm) deep plastic pans. Adapter bars and 1/6 |
duty conditions. |
|
pans are supplied by Delfield. Temperature in top opening to maintain |
Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7’ |
|
33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient |
||
(2.1m) long electrical cord and NEMA 5-15P plug. |
||
room temperature, meeting NSF 7 requirements. One 72” x 10” x .5” (183cm |
||
|
||
x 25.4cm x 1.3cm) polyethylene cutting board treated with antimicrobial |
Casters: Equipment is mounted on 2” (5.08cm) diameter casters, with front |
|
agent is mounted on the top at the front edge. |
three locking. Equipment clearance above the floor is 2.5” (6.35cm). |
|
Exterior back and bottom are two-piece 24-gauge galvanized steel. |
The following applies to three door models only |
|
Exterior ends are stainless steel. |
Doors have a 24-gauge stainless steel exterior, with thermoformed ABS |
|
|
||
Interior sides are thermoformed ABS plastic with shelf supports. Base is |
plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf |
|
fully insulated with high-density foamed in place environmentally friendly, |
per door opening. |
|
Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP |
The following applies to six drawer models only. Drawer fronts have a |
|
(Global Warming Potential) polyurethane. |
||
24-gauge stainless steel exterior, with thermoformed ABS plastic interior |
||
|
||
Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P., |
liner. Drawer frames and slides are 12-gauge stainless steel. Drawer slides |
|
with condenser coil and condensate evaporator mounted on rear of the |
are 11-gauge stainless steel with Delrin bearings. Each section has two |
|
cabinet. Evaporator coils and temperature control are located on the |
drawers. Each top drawer holds one full size 12” x 20” (30.5cm x 50.8cm) pan |
|
interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary |
and three 1/9 size pans 4” - 6” (10.2cm -15.2cm) deep. Each bottom drawer |
|
tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F |
holds one 12” x 20” (30.5cm x 50.8cm) pan and three 1/9 size 4” (10.2cm) |
|
(2°C to 4°C). |
deep pans. Pans supplied by others. |
Refrigerators Top Salad Compact Contained-Self Breathing-Front Top Salad ST4472N
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
www.delfield.com |
|
Mt. Pleasant, Michigan 48858 |
|||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|