Delfield STD4472N-12, ST4472N-12 User Manual

Delfield
™	®	Project ___________________________________
		Item _____________________________________
ST4472N Salad Top		Quantity _ ________________________________
		Date _____________________________________
		CSI Section 11400
		Approved _ _______________________________

Front-Breathing Self-Contained Compact Salad Top Refrigerators

Models

•ST4472N-12 Two section with doors twelve pan capacity

•STD4472N-12 Two section with drawers twelve pan capacity

		Standard Features
		• Patented air screen ensures product stays cold without
		drying it out
		• All 4400 Series units are 100% front breathing, which allows
		the unit to be pushed against a wall or built into a cabinet or
		an existing line up
		• Durable, rugged stainless steel sides, top and front
		• Features Delfield’s exclusive ABS interior (on sides). ABS
		is extremely durable - it won’t dent, chip or corrode and is
		backed by a limited lifetime warranty
		• Delfield supplies 1/6 size pans and adapter bars for top
		opening
		• Salad top refrigerators are standard with 10” wide,
		dishwasher safe polyethylene cutting board treated with
		anitmicrobial agent
		• “D” prefix models feature Delfield’s new drawer system.
		Drawers are backed by a 10-year warranty on the track
		assembly
	STD4472N-12	• Environmentally friendly R404A refrigerant
		• High density foamed in place environmentally friendly, Kyoto
		Protocol Compliant, Non ODP (Ozone Depletion Potential),
		Non GWP (Global Warming Potential) polyurethane keeps
		energy costs low
		• Black recessed quick grip handle
		• Standard on 2” casters for easy cleaning and installation
		• 7’ cord and plug supplied
		• One epoxy coated wire shelf standard, installed per door
		section
		• ACT solid state electronic control
		• "ST" models have a 4" stainless steel backsplash
		• One year parts and 90 day labor standard warranty.

Options &

Accessories

•Flat lift off cover

•18” wide single tier overshelf

•Stainless steel finish on back

•Plastic laminate on front

•Additional wire shelves

•Door lock

•Exterior thermometer

•Glass door(s)

•*220V/50Hertzelectricalsystem *Inclusion of this option will alter electrical specifications of the unit.

Specifications

	Exterior top is one-piece 22-gauge stainless steel with integral 2.12”	ACT control. ACT electronic, solid state control, mounted on the exterior
	(5.1cm) square nosing at the front. Top has openings to accept 12 or 18	rear of the cabinet, allows unit to maintain precise temperatures in heavy
	1/6-size 4”- 6” (10.2cm - 15.2cm) deep plastic pans. Adapter bars and 1/6	duty conditions.
	pans are supplied by Delfield. Temperature in top opening to maintain	Electrical connections are 115 volt, 60 Hertz, single phase. Unit has a 7’
	33°F (1°C) to 41°F (5°C), with pans recessed 2.5” (6.4cm) at 86°F ambient
		(2.1m) long electrical cord and NEMA 5-15P plug.
	room temperature, meeting NSF 7 requirements. One 72” x 10” x .5” (183cm
	x 25.4cm x 1.3cm) polyethylene cutting board treated with antimicrobial	Casters: Equipment is mounted on 2” (5.08cm) diameter casters, with front
	agent is mounted on the top at the front edge.	three locking. Equipment clearance above the floor is 2.5” (6.35cm).
	Exterior back and bottom are two-piece 24-gauge galvanized steel.	The following applies to three door models only
	Exterior ends are stainless steel.	Doors have a 24-gauge stainless steel exterior, with thermoformed ABS
	Interior sides are thermoformed ABS plastic with shelf supports. Base is	plastic interior liner. Cabinet has one adjustable epoxy-coated wire shelf
	fully insulated with high-density foamed in place environmentally friendly,	per door opening.
	Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP	The following applies to six drawer models only. Drawer fronts have a
	(Global Warming Potential) polyurethane.
		24-gauge stainless steel exterior, with thermoformed ABS plastic interior
	Refrigeration system uses HFC-404A refrigerant. Compressor is 1/2 H.P.,	liner. Drawer frames and slides are 12-gauge stainless steel. Drawer slides
	with condenser coil and condensate evaporator mounted on rear of the	are 11-gauge stainless steel with Delrin bearings. Each section has two
	cabinet. Evaporator coils and temperature control are located on the	drawers. Each top drawer holds one full size 12” x 20” (30.5cm x 50.8cm) pan
	interior rear wall of the cabinet. Refrigerant flow is controlled by a capillary	and three 1/9 size pans 4” - 6” (10.2cm -15.2cm) deep. Each bottom drawer
	tube. Cabinet maintains an interior cabinet temperature of 36°F to 40°F	holds one 12” x 20” (30.5cm x 50.8cm) pan and three 1/9 size 4” (10.2cm)
	(2°C to 4°C).	deep pans. Pans supplied by others.

Refrigerators Top Salad Compact Contained-Self Breathing-Front Top Salad ST4472N

	980 S. Isabella Rd.	Phone: [phone] or 989-773-7981	www.delfield.com
	Mt. Pleasant, Michigan 48858
		Fax: [phone]