Delfield SMDBP1-GH, SSDBP1-GH, SADTP1-GH, SADBP1-GH, SMDTP1-GH User Manual

...
0 (0)
®
Specication Line®
Glass Door Single Section Dual Temp Refrigerator/ Freezer Pass-Thru Units
Models
SSDTP 1-GH Refrigerato r top/free zer bott om s tain less e xter ior and inte rior g lass hal f do or
SSDBP1-GH Free zer top/ refrigerato r bottom stainless exte rior a nd i nter ior glas s
SADTP 1-GH Refrigerato r top/free zer bott om s tain less e xter ior and alum inum i nter ior glass
SADBP1-GH Free zer top/ refrigerato r bottom stainless exte rior a nd a lumi num interi or g lass
SMDTP 1-GH Refrigerato r top/free zer bott om s tain less f ront a luminum exte rior a nd i nter ior glas s
SMDBP1-GH Free zer top/ refrigerato r bottom stainless front aluminum e xter ior and inte rior g lass
half d oor
Specication Line®: Glass Door Single Section Dual Temp Refrigerator/Freezer Pass-Thru Units
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
half d oor
half d oor
half d oor
half d oor
SSDBP1-GH
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed oor. Three wire shelves are provided per section, SA/SS standard shelves are chrome plated, SM standard shelves are epoxy coated. Shelves rest on clips which are adjustable on 1” increments on stainless steel pilasters axed to the cabinet interior. Pilasters are removable without tools for cleaning. Mounted to the interior ceiling of each compartment, the interior uorescent lights are controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Doors: Double paned tempered thermopane glass. Constructed with a combination of extruded aluminum and PVC. Each door has two edgemount, self-closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Door handle is continuous
Standard Features
Stainless steel interior and exterior (SS)
• Stainless steel exterior, aluminum interior (SA)
• Aluminum interior and exterior, stainless front
• (SM) Built in door locks with heavy duty strikes
• Recessed metal door handle
• Pressure relief valve is standard to prevent door
• vapor lock Two exterior digital thermometers with high/
• low temperature alarm Easy to use electronic control
• Easy access “ip up” shroud
• Three wire shelves per section - SA/SS standard
• with chrome plated shelves and SM standard with epoxy coated shelves 10’ attached cord and plug
• 6” adjustable stainless steel legs
• Stainless steel breaker strips
• High density foamed in place environmentally
• friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low Energy savings door heater switch
• Two year parts & labor warranty
• Five year compressor warranty
along vertical dimension of the door. Door gaskets are magnetic and mount to the door, snapping in place and removable with out tools. Keyed door lock is mounted to the door. Lock engages into a heavy duty strike mounted to the cabinet face.
Refrigeration system: Each compartment has its own separate refrigeration system. Condensing units are located on top of the cabinet, outside the food zone, behind the removable upper shroud. Evaporator coils are located inside the cabinet mounted to the interior ceiling of each compartment. Defrost is automatic. Condensate travels down a tube in the cabinet side wall to a receptacle mounted to the exterior bottom of the cabinet where it is evaporated with the aid of an electric heater. Each compartment’s temperature is individually monitored, controlled and displayed on the exterior of the cabinet. Refrigerator compartment maintains between 33°F and 41°F. Freezer compartment maintains temperature between 0ºF and -5ºF.
Electrical: Unit comes with one 10’ cord and plug with single point connection to all cabinet and refrigeration system electronics. It is attached to a junction box mounted on the exterior top of the cabinet.
Options & Accessories
Security (prison) package Incandescent light Door eld rehingability Additional shelves Tray slides Stainless steel back Laminate on front, sides and back Bottom mount electrical Stainless steel banking strip Heat shield end Stainless steel kick plate Laminate kick plate 4” stainless steel utility base 230-50-1 electrical 220-60-1 electrical
980 S. I sabella Rd. Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981 Fax: 800-669-0 619
www.delfield.co m
Loading...
+ 1 hidden pages