Delfield SMDFL2-G, SADRL2-GH, SADFL2-GH, SMDRL2-GH, SADRL2-G User Manual

...
0 (0)
Project ___ ____________________ ___________
Item _________________ ___________________
Quantity _________________ _______________
CSI Sec tion 11400
Approved ____________ ___________________
Date ____ _____________________ ___________
980 S. I sabella Rd.
Mt. Pleasa nt, Michigan 4885 8
Phone: 800 -733-8948 or 989 -773-7981
Fax: 800-669-0 619
www.delfield.co m
®
Exterior: SS and SA models shall have corrosion resistant stainless
steel exterior cabinet sides, front and shroud. SM models shall have
corrosion resistant aluminum on exterior cabinet sides and will have
stainless front and shroud. All units shall have the upper shroud
hinged with a gas assist stay open feature to provide easy access to
the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel
(SS models) or heavy gauge aluminum (SA and SM models). Bottom
and top surfaces shall be die stamped to provide radius corners and
recessed oor. Three wire shelves are provided per section, SA/SS
standard shelves are chrome plated, SM standard shelves are epoxy
coated. Shelves rest on clips which are adjustable on 1” increments
on stainless steel pilasters axed to the cabinet interior. Pilasters are
removable without tools for cleaning. Mounted to the interior ceiling
of each compartment, the interior uorescent lights are controlled
automatically through a switch mounted in the hinge assembly to
protect against breakage. Door openings are protected with heavy
gauge stainless steel breaker strips. An air duct shall be mounted to
the ceiling assuring low velocity, even air movement throughout the
cabinet interior.
Doors: Double paned tempered thermopane glass. Constructed with
a combination of extruded aluminum and PVC. Each door has two
edgemount, self-closing, cam lift style hinges. Doors can be removed
from the cabinet without the use of tools. Door handle is continuous
along vertical dimension of the door. Door gaskets are magnetic and
mount to the door, snapping in place and removable with out tools.
Keyed door lock is mounted to the door. Lock engages into a heavy
duty strike mounted to the cabinet face.
Refrigeration system: Each compartment has its own separate
refrigeration system. Condensing units are located on top of the
cabinet, outside the food zone, behind the removable upper
shroud. Evaporator coils are located inside the cabinet mounted
to the interior ceiling of each compartment. Defrost is automatic.
Condensate travels down a tube in the cabinet side wall to a
receptacle mounted to the exterior bottom of the cabinet where it
is evaporated with the aid of an electric heater. Each compartment’s
temperature is individually monitored and controlled using Deleld’s
ACT-Advanced Control Technology electronic temperature control,
which provides improved pull down times, reduces compressor
cycling and longer compressor life with lower energy consumption.
Two exterior digital thermometers display temperature. Refrigerator
compartment maintains between 27°F and 40°F. Freezer
compartment maintains temperature between -5ºF and 0ºF.
Electrical: Unit comes with one 10’ cord and plug with single point
connection to all cabinet and refrigeration system electronics. It
is attached to a junction box mounted on the exterior top of the
cabinet.
Specifications
Standard Features
Options &
Accessories
Stainless steel interior and exterior (SS)
Stainless steel exterior, aluminum interior
(SA)
Aluminum interior and exterior, stainless
front (SM)
Built in door locks with heavy duty strikes
Recessed metal door handle
Pressure relief valve is standard to prevent
door vapor lock
Two exterior digital thermometers with
high/low temperature alarm
Easy to use electronic control
Easy access “ip up shroud
Three wire shelves per section - SA/SS
standard with chrome plated shelves and
SM standard with epoxy coated shelves
10’ attached cord and plug
6” adjustable stainless steel legs
Stainless steel breaker strips
High density foamed in place
environmentally friendly, Kyoto Protocol
Compliant, Non ODP (Ozone Depletion
Potential), Non GWP (Global Warming
Potential) polyurethane keeps energy costs
low
Energy savings door heater switch
Two year parts & labor warranty
Five year compressor warranty
Glass full d oor Glass half d oor
SSDRL2-G SSDRL2-GH Refrigerato r left hand sta inle ss e xter ior and inte rior
SSDFL2-G SSDFL2-GH Freezer l eft hand stainless exterior a nd i nter ior
SADRL2-G SADRL2-GH Refrigerato r left hand sta inle ss e xter ior and alum inum int erior
SADFL2-G SADFL2-GH Freezer l eft hand stainless exterior a nd a lumi num inte rior
SMDRL2-G SMDRL2-GH Refrigerato r left hand sta inle ss f ront a luminum exte rior a nd int erio r
SMDFL2-G SMDFL2-GH Freezer l eft hand stainless front aluminum e xter ior and interi or
Models
Specication Lin
Self-Contained Glass Door Two-Section Dual Temp
Refrigerator/Freezer Reach-Ins
Specication Line®: Glass Door Two-Section Dual Temp Refrigerator/Freezer Reach-Ins
Security (prison) package
6” polyurethane casters
Incandescent light
Door eld rehingability
Additional shelves
Tray slides
Stainless steel back
Laminate on front, sides and back
Bottom mount electrical
Stainless steel banking strip
Heat shield end
Stainless steel kick plate
Laminate kick plate
4” stainless steel utility base
230-50-1 electrical
220-60-1 electrical
SSDRL2-G
Loading...
+ 1 hidden pages