C/L/R 3000
Center/Left/Right Professional Audio Video Shielded Loudspeaker
with Built-In Powered Subwoofer
Owner's Manual
Congratulations on your purchase of the Definitive Technology C/L/R 3000 Shielded Center/Left/Right Audio Video Loudspeaker System. This revolutionary loudspeaker utilizes state-of-the-art components (castbasket homopolymer-coned bass/ midrange drivers, moving coil ferrofluid-cooled dome high frequency radiator, cast-basket, long excursion subwoofer, infinite power source amplifier, uniphase crossover networks, etc.), a non-resonant monocoque cabinet and low diffraction construction in order to achieve the most lifelike sound possible in your listening room for many years to come.
The Definitive Technology C/L/R 3000 is a compact high-definition loudspeaker system designed for use in audio/video systems of the highest quality.
Because of its low profile, wide range, high power handling and articulate clarity, it is ideal for use as a center channel in conjunction with all surround sound decoding systems, including Dolby ProLogic*, Dolby Digital*, Dolby EX*, DTS* and all 5.1, 6.1, and 7.1 surround sound systems. In addition, the C/L/R 3000 is ideal for use as an LCR (left, center, right main speaker) as well as a rear surround speaker in all surround sound decoding systems or as the main speakers in a high quality stereo system.
* Registered Trademark
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operating, maintenance and servicing information in the manual accompanying the device. CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture.
1.Read Instructions—All safety and operating instructions should be read before operating the device.
2.Retain Instructions—The safety and operating instructions should be retained for future reference.
3.Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.
4.Follow Instructions—All operating and safety instructions should be followed.
5.Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.
6.Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.
7.Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by the manufacturer.
8.Ventilation—The device should always be located in such a way that it maintains proper ventilation. It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.
9.Heat—Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-gen- erating devices.
10.Power Supply—The device should only be connected to a power supply of the type described in the operating instructions or as marked on the device.
11.Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or crushed by items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or fused strip and where the cord exits the device.
12.Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.
13.Periods Of Non-Use—The device should be unplugged when not being used for extended periods.
14.Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside the device.
15.Damage Requiring Service—The device should be serviced by licensed technicians when:
•The plug or power supply cord has been damaged.
•Objects have fallen or liquid spilled inside of the device.
•The device has been exposed to moisture.
•The device does not appear to be operating properly or exhibits a marked change in performance.
•The device has been dropped or the cabinet becomes damaged.
16.Service—The device should always be serviced by licensed technicians. Only replacement parts specified by the manufacturer should be used. The use of unauthorized substitutions may result in fire, shock, or other hazards.
2
Unpacking Your C/L/R 3000
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely occurred in handling after it left our plant and should be reported at once to your Definitive dealer or the delivery company that delivered your loudspeaker. Please unpack your system carefully. Save all cartons and packing materials in case you move or need to ship your system. Record the serial number found on the back of the C/L/R 3000 in the appropriate place on your warranty card.
Speaker Break-in
Your C/L/R 3000s should sound good right out of the box; however, an extended break-in period of 40-60 hours or more of normal playing is required to reach full performance capability. Break-in allows the suspensions to work in and results in fuller bass, a more open “blossoming” midrange and smoother high-frequency reproduction.
Visit us at www.definitivetech.com
3
Rear Panel |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
HIGH LEVEL IN |
|
|
|
|
|
|
® |
|
|
|
|
|
|
|
BALTIMORE MD |
|
|
|
|
|
|
|
|
|
|
21117 USA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High |
|
|
|
|
|
|
LEVEL |
|
|
|
|
|
|
|
|
|
|
FULL RANGE |
|
|
|
|
|
C |
L |
R |
3 0 0 |
0 |
LOW LEVEL IN |
|
|
|
|
|
|
|
|
W I T H |
|
|
|
|
|
|
|
|
|
B U I L T - I N |
|
|
|
|
|
|
|
|
|
|
P O W E R E D |
|
|
|
|
|
|
|
|
|
S U B W O O F E R |
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
Mid |
|
|
|
|
|
|
POWER |
|
|
|
|
|
|
|
|
|
|
AUTOMATIC ON/OFF |
|
|
|
|
|
|
|
1.2A 250V |
|
|
|
|
|
|
|
|
|
|
|
|
|
CAUTION |
AVIS |
|
|
|
|
|
|
|
|
|
RISK OF |
RISQUE DE |
|
|
|
|
|
|
|
|
|
ELECTRIC SHOCK |
CHOC ELECTRIQUE |
|
|
|
|
|
|
|
|
|
DO NOT OPEN |
NE PAS OUVRIR |
|
|
Low |
|
|
|
|
|
|
REPLACE FUSE |
UTILISER |
|
|
|
|
|
|
|
|
|
WITH SAME TYPE |
FUSIBLE DE |
|
|
|
|
|
|
|
|
|
1.2A 250V |
RECHARGE DE |
|
|
|
|
|
|
|
|
|
|
MEME TYPE |
|
|
|
|
|
|
|
|
|
|
1.2A 250V |
|
|
|
|
|
|
|
|
|
AC 120V 60HZ |
S E |
R |
I A L N |
U M B E R |
|
|
|
|
|
|
250 WATT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HIGH LEVEL IN |
|
Gold Jumper |
|
|
|
|
High |
||||
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
LEVEL |
|
|
|
|
|
|
|
|
|
|
FULL RANGE |
|
|
|
|
|
|
|
|
|
|
LOW LEVEL IN |
|
|
|
|
|
* This section of the |
|
Mid |
|||
|
|
|
|
|
|
|
||||
|
|
|
|
|
rear panel will be |
|
|
POWER |
||
|
|
|
|
|
|
|
AUTOMATIC ON/OFF |
|||
|
|
|
|
|
shown on the |
|
|
|
|
|
|
|
|
|
|
connection |
|
|
|
|
|
|
|
|
|
|
diagrams. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low |
4
Connecting Your Loudspeakers
Since in most cases the C/L/R 3000 will be used as a center channel, we will give hookup instructions as such. If you use C/L/R 3000s across the front (or a pair in stereo) simply hook up each C/L/R 3000 by repeating similar hook ups for the left and right channel C/L/R 3000s to their appropriate channel as for the center.
Connecting Each Speaker with One Pair of Speaker Wires Only
When the C/L/R 3000(s) are hooked up using simply one set of speaker wire per speaker (with no separate low-level input for the subwoofer section) a special circuit takes an infinitesimally small signal from the speaker level input and converts it to a low-level signal which then drives the subwoofer power amp.
With all the gold jumpers in place, (see diagram # 1) simply connect any of the red (+) terminals of the speaker to the red (+) terminal of the center channel speaker level outputs on your amplifier or receiver, and any of the black (-) terminals of each speaker to the black (-) terminal of the center speaker level outputs channel on your amplifier or receiver. It is essential that all the speakers (center, left, right and rears) be connected in the same way (in phase) to its own channel of the amplifier. If you experience a great lack of bass, it is likely that one speaker is out of phase with the other.
HIGH LEVEL IN |
High |
LEVEL |
FULL RANGE |
LOW LEVEL IN |
Mid |
POWER |
AUTOMATIC ON/OFF |
Low |
+ |
- |
Center
Power Amplifier or Receiver
Diagram # 1: Connecting C/L/R 3000 with One Pair of Speaker Wires Only
5
Loading...