C/L/R 2300
LCR Center/Left/Right Audio Video Shielded Loudspeaker
with Built-In Powered Subwoofer
Owner's Manual
Congratulations on your purchase of the Definitive Technology C/L/R 2300 Shielded LCR Center/Left/Right Audio Video Loudspeaker System. This revolutionary loudspeaker utilizes state-of-the- art components (cast-basket homopolymer-coned bass-midrange drivers, moving coil ferrofluid-cooled dome high frequency radiator, long excursion subwoofer, infinite power source amplifier, uniphase crossover networks, etc.), a non-resonant monocoque cabinet and low diffraction construction in order to achieve the most lifelike sound possible in your listening room for many years to come.
The Definitive Technology C/L/R 2300 is a compact high definition loudspeaker system designed for use in audio/video systems of the highest quality. Because of its low profile, wide range, high power handling and articulate clarity, it is ideal for use as a center channel in conjunction with all surround sound decoding systems, including Dolby Pro Logic*, Dolby Digital AC-3*, and DTS*. In addition, the C/L/R 2300 is ideal for use as an LCR (left, center right speaker) as well as a rear surround speaker in all surround sound decoding systems, including Dolby Pro Logic*, Dolby Digital AC-3*, and DTS*, or as audiophile quality main speakers in a high quality stereo system.
* Registered Trademark
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.
CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operating, maintenance and servicing information in the manual accompanying the device. CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.
CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture.
1.Read Instructions—All safety and operating instructions should be read before operating the device.
2.Retain Instructions—The safety and operating instructions should be retained for future reference.
3.Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.
4.Follow Instructions—All operating and safety instructions should be followed.
5.Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.
6.Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.
7.Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by the manufacturer.
8.Ventilation—The device should always be located in such a way that it maintains proper ventilation. It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.
9.Heat—Never locate the device near heat sources such as radiators, floor registers, stoves or other heat-gen- erating devices.
10.Power Supply—The device should only be connected to a power supply of the type described in the operating instructions or as marked on the device.
11.Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or crushed by items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or fused strip and where the cord exits the device.
12.Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.
13.Periods Of Non-Use—The device should be unplugged when not being used for extended periods.
14.Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside the device.
15.Damage Requiring Service—The device should be serviced by licensed technicians when:
•The plug or power supply cord has been damaged.
•Objects have fallen or liquid spilled inside of the device.
•The device has been exposed to moisture.
•The device does not appear to be operating properly or exhibits a marked change in performance.
•The device has been dropped or the cabinet becomes damaged.
16.Service—The device should always be serviced by licensed technicians. Only replacement parts specified by the manufacturer should be used. The use of unauthorized substitutions may result in fire, shock, or other hazards.
2
Unpacking Your C/L/R 2300
Please Inspect For Shipping Damage
Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely occurred in handling after it left our plant and should be reported at once to your Definitive dealer or the delivery company that delivered your loudspeaker. Please unpack your system carefully. Save all cartons and packing materials in case you move or need to ship your system. Record the serial number found on the back of the C/L/R 2300 in the appropriate place on your warranty card.
Speaker Break-in
Your C/L/R 2300s should sound good right out of the box; however, an extended break-in period of 40-60 hours or more of normal playing is required to reach full performance capability. Break-in allows the suspensions to work in and results in fuller bass, a more open “blossoming” midrange and smoother high frequency reproduction.
Installing the Logo
Because the C/L/R 2300 can be used either vertically or horizontally, the logo is supplied separately. Holes are provided for installation when the speaker is used horizontally or vertically. These are located under the grill cloth in recesses that you can feel through the grill cloth at the center of the lower long edge of the speaker and at the top and bottom short edge of the speaker grill cloth on the front (so you can orient the speakers with each speaker’s woofer facing in or each speaker’s woofer facing out if you position the speakers vertically). Locate the logo over the two holes within each recess that you choose and gently tap it in through the grill cloth.
Installing the Feet/Angling Device
The C/L/R 2300 is supplied with brass inserts designed to go into the bottom of the speaker, when the speaker is positioned horizontally, to hold adjustable feet which hold the speaker above the surface it is placed on as well as give you the option of angling the speaker up or down to point directly at the listeners. Install three of these inserts in the bottom of the speakers. There are predrilled holes on the bottom of the speaker under the grill cloth (when the speaker is positioned horizontally). Simply locate the holes. Two holes are located a little back (both the same distance) from the front of the speaker. Install brass inserts in each of these. You also have a choice for the rear hole depending on the depth of the surface you will place the speaker on. They are located along the center line going from the front and the back of the speaker on the bottom. Then feel for them and select one of these holes. Gently tap the inserts in through the grill cloth and screw the feet in.
3
Loading...