Page 1
DISCRETE SEMICONDUCTORS
handbook, half
DATA SH EET
page
M3D112
BGY67BO/4M
Optical receiver module
Product specification
Supersedes data of 1998 Apr 17
2001 Sep 27
Page 2
Philips Semiconductors Product specification
Optical receiver module BGY67BO/4M
FEATURES
• Excellent linearity
• Extremely low noise
• Excellent flatness
• Standard CATV outline
• Rugged construction
• Gold metallization ensures excellent reliability.
APPLICATIONS
• Reverse receiveramplifier in two-way CATV systems in
the 5 to 400 MHz frequency range.
DESCRIPTION
Hybrid high dynamic range optical amplifier module in a
SOT115U package operating at a voltage supply of
24 V (DC). The module contains a monomode optical
input suitable for wavelengths from 1290 to 1600 nm, a
terminal to monitor the pin diode current and an electrical
output with an impedance of 75 Ω.
PINNING - SOT115U
PIN DESCRIPTION
1 monitor current
2,3,7,8 common
5+V
B
9 output
handbook, halfpage
Side view
2
789
351
Fig.1 Simplified outline.
MLB162
QUICK REFERENCE DATA
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
f frequency range 5 400 MHz
S
22
output return losses f = 5 to 400 MHz 14 − dB
optical input return losses 40 − dB
d
2
second order distortion −−70 dBc
F equivalent noise input f = 5 to 400 MHz − 7 pA/√Hz
I
tot
total current consumption (DC) VB= 24 V 150 180 mA
HANDLING
Fibreglass optical coupling: maximum tensile strength = 5 N; minimum bending radius = 35 mm.
CAUTION
This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport
and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A, and SNW-FQ-302B.
2001 Sep 27 2
Page 3
Philips Semiconductors Product specification
Optical receiver module BGY67BO/4M
LIMITING VALUES
In accordance with the Absolute Maximum Rating System (IEC 60134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
f frequency range 5 400 MHz
T
stg
T
mb
P
in
ESD ESD sensitivity human body model;
CHARACTERISTICS
Table 1 Bandwidth 5 to 400 MHz; VB= 24 V; Tmb=30°C; ZL=75Ω
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
S responsivity λ = 1300 nm 800 − V/W
FL flatness of frequency response −±0.3 dB
S
22
d
2
d
3
F equivalent noise input f=5to400MHz − 7 pA/√Hz
s
λ
λ optical wavelength 1290 1600 nm
L length of optical fibre fibre; SM type; 9/125 µm1 − m
I
tot
storage temperature −40 +85 °C
operating mounting base temperature −20 +85 °C
optical input power continuous − 5mW
500 − V
R = 1.5 kΩ; C = 100 pF
output return losses f=5to400MHz 14 − dB
optical input return losses 40 − dB
second order distortion note 1 −−70 dB
note 2 −−70 dB
third order distortion note 3 −−80 dB
spectral sensitivity λ = 1310 ±20 nm 0.85 − A/W
λ = 1550 ±20 nm 0.9 − A/W
total current consumption (DC) note 4 150 180 mA
Notes
1. Two laser test; each laser with 40% modulation index;
fp= 30.25 MHz; Pp= 0.5 mW;
fq= 70 MHz; Pq= 0.5 mW;
measured at fp+fq= 100.25 MHz.
2. Two laser test; each laser with 40% modulation index;
fp= 200.25 MHz; Pp= 0.5 mW;
fq= 100 MHz; Pq= 0.5 mW;
measured at fp+fq= 300.25 MHz.
3. Three laser test; each laser with 40% modulation
index;
fp= 325.25 MHz; Pp= 0.33 mW;
fq= 210.25 MHz; Pq= 0.33 mW;
fr= 135.25 MHz; Pr= 0.33 mW;
measured at fp+fq−fr= 400.25 MHz.
4. The module normally operates at VB= 24 V, but is
able to withstand supply transients up to 30 V.
2001 Sep 27 3
handbook, halfpage
photo
Pin 1
10 kΩ
current
1 kΩ
Fig.2 Monitor current pin.
MLB151
Page 4
Philips Semiconductors Product specification
Optical receiver module BGY67BO/4M
PACKAGE OUTLINE
Rectangular single-ended package; aluminium flange; 2 vertical mounting holes;
2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input; 7 gold-plated in-line leads
E
S
2
A
2
A
S
L
1
F
S
Z p
1
D
5
78923
N
N
M
N
1
2
SOT115U
M
M
1
2
c
d
U
Q
B
U
1
DIMENSIONS (mm are the original dimensions)
A
A
UNIT
max.
max.
mm 20.8 9.1
2
p
q
optical input
2
bF
0.51
0.38
D
c
max.dmax.
0.25 27.2 2.54 13.75 2.54 5.08 12.7 8.8 1000
E
max.
yM
B
ee
0 5 10 mm
1
min.
scale
L
W
M
2.5M1.6
e
e
1
q
2
q
1
N
M
2
1
min.
0.9
S
1
16.7
16.1
N
max.
10.7
b
yM
U
S
2
max.
4.95
44.75 8 0.25 0.1 12
4.55
N
2
1
max.
4.15
5
3.85
w
B
yM
1
p
W
U
2
6-32
UNC
Q
max.
2.4 38.1 25.4 10.2 4.2
M
B
q
q1q
Z
yw
max.
S
2
OUTLINE
VERSION
SOT115U
IEC JEDEC EIAJ
REFERENCES
2001 Sep 27 4
EUROPEAN
PROJECTION
ISSUE DATE
99-04-13
01-08-10
Page 5
Philips Semiconductors Product specification
Optical receiver module BGY67BO/4M
DATA SHEET STATUS
PRODUCT
DATA SHEET STATUS
Objective data Development This data sheet contains data from the objective specification for product
Preliminary data Qualification This data sheet contains data from the preliminary specification.
Product data Production This data sheet contains data from the product specification. Philips
(1)
STATUS
(2)
DEFINITIONS
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Changes will be
communicated according to the Customer Product/Process Change
Notification (CPCN) procedure SNW-SQ-650A.
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
attheseoratanyother conditions above those given in the
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
norepresentationorwarrantythatsuchapplicationswillbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductorscustomersusingorsellingtheseproducts
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes, without notice, in the
products, including circuits, standard cells, and/or
software, described or contained herein in order to
improve design and/or performance. Philips
Semiconductors assumes no responsibility or liability for
theuseofanyoftheseproducts,conveysnolicenceortitle
under any patent, copyright, or mask work right to these
products,andmakesno representations or warranties that
these products are free from patent, copyright, or mask
work right infringement, unless otherwise specified.
2001 Sep 27 5
Page 6
Philips Semiconductors Product specification
Optical receiver module BGY67BO/4M
NOTES
2001 Sep 27 6
Page 7
Philips Semiconductors Product specification
Optical receiver module BGY67BO/4M
NOTES
2001 Sep 27 7
Page 8
Philips Semiconductors – a w orldwide compan y
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
© Koninklijke Philips Electronics N.V. 2001
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Printed in The Netherlands 613518/04/pp8 Date of release:2001 Sep 27 Document order number: 9397 750 08697
SCA73
Loading...