Datalogic Scanning DS2400N User Manual

0 (0)

DS2400N

QUICK REFERENCE GUIDE

4 5 6

2

3

7

 

11

 

10

 

1

 

 

9

8

 

 

 

 

 

Figure A

 

 

 

1

Warning and Device Class Labels

7

Laser Beam Output Window

2

"POWER ON" LED

8

"COM" LED

 

3

Mounting Holes

9

"STATUS" LED

 

4

"READY" LED

10

Push Button

 

5

"GOOD" LED

11

Accessory Mounting Holes

6

"TRIGGER" LED

 

 

 

 

This manual illustrates a Stand Alone application. For other types of installations, such as

 

ID-NET™, Pass-Through, Multiplexer Layout, etc. and for a complete scanner configuration using

 

Genius™ configuration program, refer to the DS2400N Reference Manual available on the CD.

NOTE

This manual is also downloadable from the Web at www.automation.datalogic.com/ds2400n.

DS2400N QUICK GUIDE

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on Internet. Log on to: www.automation.datalogic.com

I

Su Internet sono disponibili le versioni aggiornate di driver e documentazione di questo prodotto. Questo manuale è disponibile anche nella versione italiana.

Collegarsi a: www.automation.datalogic.com

F

Les versions mises à jour de drivers et documentation de ce produit sont disponibles sur Internet. Ce manuel est aussi disponible en version française.

Cliquez sur : www.automation.datalogic.com

D

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation von diesem Produkt. Die deutschsprachige Version dieses Handbuches ist auch verfügbar.

Adresse : www.automation.datalogic.com

E

En Internet están disponibles las versiones actualizadas de los drivers y documentación de este producto. También está disponible la versión en español de este manual.

Dirección Internet : www.automation.datalogic.com

SERVICES AND SUPPORT

Datalogic provides several services as well as technical support through its website. Log on to www.automation.datalogic.com and click on the links indicated for further information including:

PRODUCTS

Search through the links to arrive at your product page where you can download specific Manuals and

Software & Utilities including:

-Genius™ a utility program, which allows device configuration using a PC. It provides RS232 interface configuration.

SERVICES & SUPPORT

-Datalogic Services - Warranty Extensions and Maintenance Agreements

-Authorised Repair Centres

CONTACT US

E-mail form and listing of Datalogic Subsidiaries

2

DS2400N QUICK GUIDE

STEP 1 – CONNECT THE SYSTEM

To connect the system in a Stand Alone configuration, you need the hardware indicated in Figure 1. In this layout the data is transmitted to the Host on the main serial interface. In Local Echo communication mode, the RS232 auxiliary interface can be used to transmit data independently from the main interface selection. When On-Line Operating mode is used, the scanner is activated by an External Trigger (photoelectric sensor) when the object enters its reading zone.

PG 6000

MAIN

DS2400N

CBX100/500

Host

 

 

 

 

 

 

 

 

 

 

 

* Presence Sensor

 

 

 

 

 

 

 

 

 

 

 

 

 

P.S.*

I/O, AUX

 

 

(for On-Line mode)

Figure 1 – DS2400N in Stand Alone Layout

CBX100/500 Pinout for DS2400N

The table below gives the pinout of the CBX100/500 terminal block connectors. Use this pinout when the DS2400N reader is connected by means of the CBX100/500:

CBX100/500 Terminal Block Connectors

 

Power

 

 

 

Outputs

Vdc

Power Supply Input Voltage +

 

+V

Power Source - Outputs

GND

Power Supply Input Voltage -

 

-V

Power Reference - Outputs

Earth

Protection Earth Ground

 

O1+

Output 1 +

 

 

 

 

O1-

Output 1 -

 

Inputs

 

O2+

Output 2 +

+V

Power Source – External Trigger

 

O2-

Output 2 -

I1A

External Trigger A (polarity insensitive)

 

Auxiliary Interface

I1B

External Trigger B (polarity insensitive)

TX

Auxiliary Interface TX

-V

Power Reference – External Trigger

RX

Auxiliary Interface RX

+V

Power Source – Inputs

 

SGND

Auxiliary Interface Reference

I2A

Input 2 A (polarity insensitive)

 

 

ID-NET™

I2B

Input 2 B (polarity insensitive)

 

REF

Network Reference

-V

Power Reference – Inputs

 

ID+

ID-NET™ network +

 

Shield

 

ID-

ID-NET™ network -

Shield

Network Cable Shield

 

 

 

 

 

 

 

Main Interface

 

 

 

RS232

 

RS485 Full-Duplex

 

RS485 Half-Duplex

 

TX

 

 

TX+

 

RTX+

 

RTS

 

 

TX-

 

RTX-

 

RX

 

 

*RX+

 

 

 

CTS

 

 

*RX-

 

 

 

SGND

 

 

SGND

 

SGND

* Do not leave floating, see Reference Manual for connection details.

Do not connect GND, SGND and REF to different (external) ground references. GND, SGND and REF are internally connected through filtering circuitry which can be permanently

damaged if subjected to voltage drops over 0.8 Vdc.

CAUTION

3

DS2400N QUICK GUIDE

25-pin Connector Pinout for DS2400N

The table below gives the pinout of the 25-pin male D-sub connector for connection to the power supply and input/output signals. Use this pinout when the DS2400N reader is connected by means of the 25-pin connector:

 

1

 

13

 

 

14

25

 

 

Figure 2 - 25-pin Male D-sub Connector

 

 

25-pin D-sub male connector pinout

 

Pin

Name

Function

 

 

13, 9

Vdc

Power supply input voltage +

 

25, 7

GND

Power supply input voltage -

 

1

CHASSIS

Cable shield connected to chassis

 

18

I1A

External Trigger A (polarity insensitive)

 

19

I1B

External Trigger B (polarity insensitive)

 

6

I2A

Input 2 A (polarity insensitive)

 

10

I2B

Input 2 B (polarity insensitive)

 

8

O1+

Output 1 +

 

 

22

O1-

Output 1 -

 

 

11

O2+

Output 2 +

 

 

12

O2-

Output 2 -

 

 

20

RX

Auxiliary RS232 RX

 

 

21

TX

Auxiliary RS232 TX

 

 

23

ID+

ID-NET™ network +

 

 

24

ID-

ID-NET™ network -

 

 

14, 15, 16, 17

NC

Not Connected

 

 

Pin

Name

RS232

RS485

RS485

Full-Duplex

Half-Duplex

 

 

 

2

MAIN INTERFACE

TX

TX+

RTX+

3

RX

*RX+

 

4

(SW SELECTABLE)

RTS

TX-

RTX-

5

 

CTS

*RX-

 

* Do not leave floating, see Reference Manual for connection details.

4

Datalogic Scanning DS2400N User Manual

DS2400N QUICK GUIDE

STEP 2 – MOUNT AND POSITION THE SCANNER

1.To mount the DS2400N, use the mounting bracket to obtain the most suitable position for the reader as shown in the figures below.

Skew

Pitch

Tilt

Skew

Figure 3 - Positioning with Mounting Bracket

2.When mounting the DS2400N take into consideration these three ideal label position angles:, Skew 10° to 30°, Tilt 0° and Pitch 0°.

P

T

S

Assure at least 10°

Minimize

Minimize

Figure 4 –, Skew, Tilt and Pitch Angles

3.Refer to the Reading Diagrams in the Appendix of this Quick Reference Guide to decide the distance your scanner should be positioned at.

5

DS2400N QUICK GUIDE

STEP 3 – X-PRESS™ CONFIGURATION

X-PRESS™ is the intuitive Human Machine Interface designed to improve ease of installation and maintenance.

Status and diagnostic information are clearly presented by means of the five colored LEDs, whereas the single push button gives immediate access to the following relevant functions:

Test Mode with bar graph visualization to check static reading performance

AutoLearn to self-detect and auto-configure for reading unknown barcodes (by type and length)

AutoSetup to self-optimize and auto-configure reading performance in demanding applications

If using the OM2000N accessory, when entering the X-PRESS™ interface, the Oscillating Mirror remains in the default fixed position (-15°) in order to make barcode reading easier while

performing the X-PRESS™ functions.

NOTE

The colors and meaning of the five LEDs are illustrated in the following table:

READY (green)

This LED indicates the device is ready to operate.

GOOD (green)

This LED confirms successful reading.

TRIGGER (yellow)

This LED indicates the status of the reading phase.

COM (yellow)

This LED indicates active communication on main serial port.

STATUS (red)

This LED indicates a NO READ result.

During the reader startup (reset or restart phase), all the LEDs blink for one second.

On the back of the reader near the cable, the “POWER ON” LED indicates the laser scanner is correctly powered.

AUTO LEARN

If you are configuring your scanner using X-PRESS™, you must start with the Auto Learn procedure.

1.Enter the Auto Learn function by holding the X-PRESS™ push button pressed until the LEARN LED is on.

2.Release the button to enter the Auto Learn function.

Once entered, the reader starts a procedure to automatically detect and recognize barcodes (by type and length), which are presented to it (*). The laser turns on and the LEARN LED blinks to indicate the ongoing process.

 

READY

green

 

 

SETUP

GOOD

green

 

LEARN

TRIGGER

yellow

 

TEST

COM

yellow

 

 

STATUS

red

 

 

Figure 5 – X-PRESS™ Interface: Auto Learn Function

The procedure is as follows:

A)place the desired barcode on the scanline.

B)wait until the LEARN LED stays steady on (indicating the reader has detected the barcode).

C)repeat, if needed, the above two steps to program up to 10 different barcodes (the LEARN LED returns to the blinking state for the next code). If more than one barcode is detected, the Multi Label mode is enabled (refer to the “2K/4K Family Software Configuration Parameter Guide” Help file).

* In case of Programming Barcodes, refer to the “ID-NET™ Programming Barcodes And Setup Procedure” document in the product CD.

6

Loading...
+ 13 hidden pages