Danby SWC057D1BSS, SPRWC053D1SS Manual

Loading...

OWNER’S MANUAL

MANUEL DU PROPRIÉTAIRE

MANUAL DEL PROPIETARIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WINE COOLER

1

- 10

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Owner’s Manual.............................

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REFROIDISSEUR DE VIN

11

- 20

 

MODEL • MODÈLE • MODELO

 

 

Manuel du propriétaire.................

 

SPRWC053D1SS

 

 

 

 

 

 

 

 

ENFRIADOR DE VINO

21 - 30

 

 

 

 

 

 

 

 

Manual del propietario.................

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

 

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

2019.12.17

www.SilhouetteAppliances.com

Welcome

Welcome to the Silhouette family. We are proud of our quality products and we believe in dependable service. We suggest that you read this owner’s manual before plugging in your new appliance as it contains important operation information, safety information, troubleshooting and maintenance tips to ensure the reliability and longevity of your appliance.

Visit www.SilhouetteAppliances.com to access self service tools, FAQs and much more. For additional assistance call 1-844-455-6097.

Note the information below; you will need this information to obtain service under warranty.

You must provide the original purchase receipt to validate your warranty and receive service.

Model Number: ________________________________________________

Serial Number: ________________________________________________

Date of Purchase: ______________________________________________

Need Help?

Before you call for service, here are a few things you can do to help us serve you better.

Read this owner’s manual:

It contains instructions to help you use and maintain your appliance properly.

If you receive a damaged appliance:

Immediately contact the retailer or builder that sold you the appliance.

Save time and money:

Check the troubleshooting section at the end of this manual before calling. This section will help you solve common problems that may occur.

1-844-455-6097

1

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAFETY REQUIREMENTS

SAFETY REQUIREMENTS

DANGER: Risk of fire or explosion. Flammable refrigerant used. Do not puncture refrigerant tubing.

Do not use mechanical devices to defrost refrigerator.

Ensure that servicing is done by factory authorized service personnel, to minimize product damage or safety issues.

If the power supply cord is damaged, it must be replaced by the manufacturer, its service agent or similar qualified person in order to avoid hazard.

Consult repair manual or owner’s guide before attempting to service this product. All safety precautions must be followed.

Dispose of properly in accordance with federal or local regulations.

Follow handling instructions carefully.

Do not store explosive substances such as aerosol cans with a fl ammable propellant in this appliance.

WARNING: Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

WARNING: Do not damage the refrigerant circuit.

WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.

CAUTION: Children should be supervised to ensure that they do not play with the appliance.

DANGER: Risk of child entrapment. Before throwing away an old appliance:

Remove the door or lid.

Leave shelves in place so that children may not easily climb inside.

DANGER: Do not add a lock to the door or lid. This can cause child entrapment and harm.

This appliance is not intended for use by persons (including children) whose physical, sensory or mental capabilities may be different or reduced, or who lack experience or knowledge, unless such persons receive supervision or training to operate the appliance by a person responsible for their safety.

This appliance is intended to be used in household and similar applications such as:

Staff kitchen areas in shops, offices and other working environments;

Farm houses and by clients in hotels, motels and other residential type environments;

Bed and breakfast type environments;

Catering and similar non-retail applications.

GROUNDING INSTRUCTIONS

This appliance must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire for the electrical current.

This appliance has a cord that has a grounding wire with a 3-prong plug. The power cord must be plugged into an outlet that is properly grounded. If the outlet is a 2-prong wall outlet, it must be replaced with a properly grounded 3-prong wall outlet. The serial rating plate indicates the voltage and frequency the appliance is designed for.

WARNING - Improper use of the grounding plug can result in a risk of electric shock. Consult a qualified electrician or service agent if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded.

Do not connect your appliance to extension cords or together with another appliance in the same wall outlet. Do not splice the power cord. Do not under any circumstances cut or remove the third ground prong from the power cord. Do not use extension cords or ungrounded (two prongs) adapters.

SAVE THESE INSTRUCTIONS!

2

INSTALLATION INSTRUCTIONS

LOCATION

Two people should be used when moving the appliance.

Remove interior and exterior packaging prior to installation. Wipe the outside of the appliance with a soft, dry cloth and the inside with a lukewarm wet cloth.

Place the appliance on a fl oor that is strong enough to support it when it is fully loaded.

Do not place the appliance in direct sunlight or near sources of heat, such as a stove or heater, as this can increase electrical consumption.

Extreme cold ambient temperatures may also cause the appliance to perform improperly.

Do not use the appliance near water, for example in a wet basement or near a sink.

This appliance is intended for household use only. It is not designed for outside installation, including anywhere that is not temperature controlled (garages, porches, vehicles, etc.).

Before connecting the appliance to a power source, let it stand upright for approximately 6 hours. This will reduce the possibility of a

malfunction in the cooling system from handling during transportation.

This appliance is 23.8 inches (60.5 cm) wide by 34.1 inches (86.5 cm) high by 23.7 inches (60.1 cm) deep.

FRONT VENT

This appliance is front breathing. Do not block the front air vent as this will result in high operating temperatures, higher energy usage and possible system overheating and failure.

LEVELING INSTRUCTIONS

There is an adjustable leg on the bottom of the appliance that can be turned up or down to ensure that the appliance is level. It is important that the appliance is level to minimize noise and vibration. To level the appliance:

1.Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching the bottom of the cabinet.

2.Slowly turn the leveling leg clockwise until the appliance is level.

3

INSTALLATION INSTRUCTIONS

PREPARING THE ENCLOSURE

REQUIRED TOOLS

Gloves and safety goggles should be worn during installation.

It is not recommended to install the appliance into a corner or directly beside a wall. The door will need to be opened more than 90° to allow full extension of the shelves. If it is necessary to place the unit next to a wall or in a corner, leave at least 2-4 inches (5- 10 cm) of space between the wall and the appliance to allow for the door opening.

The cabinet opening must be at least 24 inches (61 cm) wide by 35 inches (88.9 cm) high by 25 inches (63.5 cm) deep.

Safety goggles

Gloves

Tape measure

Carpenter square

Level

Flashlight

Electric drill with hole bit

Tape measure

Carpenter square

Safety goggles

Flashlight

Electric drill with hole bit

Gloves

Level

 

Note: The listed depth requirement is assuming that the electrical outlet is located in the adjacent cabinetry or fl ush mounted in the rear wall, not surface mounted inside the enclosure.

If the electrical outlet is located inside adjacent cabinetry, cut a 1.5 inch (3.8 cm) diameter hole to admit the power cord. If the cabinet wall is metal, the hole edge must be covered with a bushing or grommet.

35 in

1.5 in (3.8 cm) diameter

(88.9 cm)

*If electrical outlet in

adjacent cabinetry

2 in (5 cm)

Electrical Access

6 in (15.2 cm)

25 in

(63.5 cm)

90°

24 in (61 cm)

4

OPERATING INSTRUCTIONS

CONTROL PANEL

1.Standard mode indicator light

2.Energy saving mode indicator light

3.Sabbath mode indicator light

4.Demo mode indicator light

5.Interior light setting indicator light

6.Interior light colour setting indicator light

7.Alarm indicator light

8.Disable door alarm indicator light

9.Upper display panel: Shows the set temperature of the upper chamber.

10.Lower display panel: Shows the set temperature of the lower chamber.

11.Power indicator light: Illuminates when the compressor is running.

12.Upper chamber indicator light

13.Lower chamber indicator lights

14.Temperature scale indicator lights

15.Increase and decrease buttons: Used to increase or decrease the set temperature 1° increments.

16.Mode button: Press to toggle between standard and energy saving mode. The relevant indicator light will illuminate. The appliance will default to standard mode.

17.Light Button: Used to set the light mode.

18.Power button: Press to turn the appliance on. Press and hold for 3 seconds to turn the appliance off.

INTERIOR LIGHT

The interior light will default to turning on and off when the door is opened or closed.

Press the light button once to turn the light off while the door is open. The light will resume default functioning when the door is closed.

There are four light mode settings:

L1: The light will turn on and off when the door is opened and closed.

L2: The light will remain on indefinitely at 100% illumination.

L3: The light will remain on for 120 minutes at 100% illumination and then resume default operation.

L4: The light will remain on for 120 minutes at 50% illumination and then resume default operation.

To change the light setting, press the light button once to display the current setting. Press the light button repeatedly to choose the desired light setting. The display will fl ash the chosen setting 5 times to confirm.

INTERIOR LIGHT COLOR

The interior light can be set to either white or blue.

Press and hold the light button for 3 seconds until the interior light color symbol fl ashes, then press the light button to toggle between a white or blue light. The interior light colour setting indicator light will

fl ash 5 times to confirm.

9

 

 

10

1

2

3

4

5

6

7

8

 

 

Std

Eco

Sab Demo

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

 

11

 

14

 

 

 

 

 

 

 

12

15

13

 

15

 

16

 

17

 

18

 

5

OPERATING INSTRUCTIONS

FUNCTION INSTRUCTION

OPEN DOOR ALARM

The default temperature setting is 54°F (12°C). The default temperature scale is °F.

To switch the display between °F and °C, press and hold the increase and decrease buttons simultaneously for approximately 3-5 seconds.

The temperature can be set as low as 41°F (5°C) or as high as 64°F (18°C).

Actual temperature inside the appliance can vary based on ambient temperature, how often the door is opened and how many warm bottles have recently been added to the appliance.

If the appliance loses power, the control panel will remember the set temperature. Once power is restored, the appliance will return to normal functioning automatically.

If the inner cabinet temperature is higher than 73°F (23°C) for one hour, the error code “HI” will show on the display, the alarm indicator light will illuminate and an alarm will sound.

If the inner cabinet temperature is lower than 32°F (0°C) the error code “LO” will show on the display, the alarm indicator light will illuminate and an alarm will sound.

If the inner cabinet temperature remains at 32°F (0°C) for more than 30 minutes, the error code “CL” will show on the display, the alarm indicator light will illuminate and an alarm will sound. The appliance will stop functioning to prevent the contents from freezing.

DEMO MODE

Demo mode is only intended to be used on the sales fl oor. It can be used to show how the appliance will look while running without engaging the compressor or the cooling function. The fan will run on low speed but all alarms and beeping will be disabled.

Press and hold the increase button and the power button at the same time for 10 seconds to enable demo mode. The demo mode indicator light will illuminate.

Press and hold the increase button and the power button at the same time for 10 seconds to return the appliance to standard mode.

If the door is not closed completely for 5 minutes, the alarm indicator light will illuminate and an alarm will sound.

The open door alarm can be silenced temporarily by pressing the power button once. The alarm indicator light will remain illuminated and the interior light will continue to fl ash until the door is closed.

If the door is closed and the alarm continues to sound, check that the actuator at the bottom of the door is making contact with the switch on the appliance.

DISABLE OPEN DOOR ALARM

The audible door alarm can be permanently turned off if desired. The alarm indicator light and the interior light will continue to illuminate if the door is left open for more than 5 minutes.

To disable the open door alarm, press and hold the mode button and the light button at the same time for 3 seconds until the disable door alarm indicator light illuminates. In future if the door is left open the alarm indicator light and the interior light will still fl ash, but the audible door alarm will not sound.

ENERGY SAVING MODE

Energy saving mode will turn off the interior light, the control panel lights and the display. The energy saving mode indicator light will illuminate.

Pressing the increase or decrease button will cause the display to turn on for 5 seconds before resuming energy saving mode.

SABBATH MODE

Sabbath mode can be used to disable all interior lights and sounds from the appliance.

Press and hold the increase button and the mode button at the same time for 5 seconds to enable Sabbath mode. The SAB symbol will illuminate and the display will show “Sb” to indicate that Sabbath mode is active.

Press and hold the increase button and the mode button for 5 seconds to return the appliance to standard mode.

6

Danby SWC057D1BSS, SPRWC053D1SS Manual

OPERATING INSTRUCTIONS

DOOR REVERSAL INSTRUCTIONS

If the appliance is placed on its back or side for any length of time during this process, it must be allowed to remain upright for 6 hours before plugging it in to avoid damage to the internal components.

1.Remove the door pins from the upper and lower hinges. Remove the door from the cabinet.

2.Remove the hinge covers from the upper and lower hinges. Remove the hinges from the cabinet. Remove the screw hole covers from the left side of the cabinet. Install the screw hole covers in the screw holes on the right side of the cabinet. Install the upper right hinge on the

bottom left of the cabinet. It doubles as the lower left hinge. Install the lower right hinge on the upper left side of the cabinet. It doubles as the upper left hinge.

3.Remove the door latch and the actuator from the bottom of the door. Install them both in the screw holes at the top of the door.

4.The door will need to be rotated 180° before being reinstalled on the cabinet to ensure that the door handle is on the correct side and that the door latch and actuator are at the bottom of the door. Ensure that the top of the door is aligned with the top of the cabinet, that the actuator is making contact with the switch and that the rubber gasket is making contact with the cabinet all the way around the door before tightening the hinge screws.

5.Open the door 90° and reinstall the hinge covers.

A.Door

B.Door pin

C.Screw hole cover

D.Upper hinge

E.Upper hinge cover

F.Latch

G.Actuator

1

 

 

 

 

B

 

 

 

 

 

A

2

 

 

 

 

D

 

 

 

 

 

E

 

C

 

 

 

 

3

 

 

 

 

 

 

 

F

 

G

 

 

 

 

 

 

4

 

 

B

 

 

 

D

 

 

 

 

 

 

 

 

A

 

5

D

 

 

D

E

 

 

 

 

 

 

 

A

 

A

 

 

 

 

 

 

 

E

 

 

 

7

OPERATING INSTRUCTIONS

 

CARE & MAINTENANCE

SHELF INSTRUCTIONS

Do not cover shelves with aluminum foil or any other material as this will impede air fl ow inside the cabinet and can adversely affect the interior cabinet temperature.

To remove the shelves:

1.Fully extend the shelf.

2.Lift up the front of the shelf.

3.Holding the shelf track, push the shelf in and then up to release it from the rear dampers.

CLEANING

Ensure the appliance is unplugged before cleaning.

To clean the inside of the appliance, use a soft cloth and a solution of a tablespoon of baking soda to one quart of water or a mild soap solution or some mild detergent.

Wash removable shelves in a mild detergent solution, then dry and wipe with a soft cloth.

Clean the outside with a soft, damp cloth and some mild detergent.

It is important to keep the area clean where the door seals against the cabinet. Clean this area with a soapy cloth. Rinse with a damp cloth and let dry.

Note: Do not use cleaners containing ammonia or alcohol on the appliance. Ammonia or alcohol can damage the appearance of the appliance. Never use any commercial or abrasive cleaners or sharp objects on any part of the appliance.

DEFROST

This unit is equipped with an automatic defrost function and does not require manual defrosting. Defrost water from the appliance is channeled into a drip tray located above the compressor. Heat transfer from the compressor causes the defrost water to evaporate.

STORAGE INSTRUCTIONS

The maximum capacity of this appliance is 51 wine bottles of 750 ml size.

Position wine bottles alternately (head-to-tail) on each of the upper five shelves. This will allow storage of 8 bottles per shelf. See figure A.

Position wine bottles in a pyramid shape on the bottom shelf. This will allow storage of eleven bottles on the bottom shelf. See figure B.

A

B

DISPOSAL

This appliance may not be treated as regular household waste, it should be taken to the appropriate waste collection point for recycling of electrical components. For information on local waste collection points, contact your local waste removal agency or government office.

ERROR CODES

If the “HI”, “LO” or “CL” error codes appear on the display, press the power button once to silence the alarm.

If the error codes reappear on the display and remain for more than 5 minutes, a power reset may rectify the issue. Unplug the appliance, wait 5 minutes and then plug the unit back in.

If the error code persists after a power reset, contact consumer care or an authorized service agent.

8

TROUBLESHOOTING

Silhouette Consumer Care: 1-844-455-6097

Hours of operation:

Monday to Thursday 8:30 am - 6:00 pm Eastern Standard Time

Friday 8:30 am - 4:00 pm Eastern Standard Time

Information in this manual is subject to change without notice.

PROBLEM

POSSIBLE CAUSE

No power

• A fuse may be blown or the circuit breaker

 

tripped

 

• Plug not fully inserted into the wall outlet

 

 

Internal temperature not cold enough

• Door is not shut properly or opened excessively

Appliance runs continuously

• Exhaust vent is obstructed

Alarm sounding and “HI” on the display panel

• Recently added a large quantity of warm bottles

Alarm indicator light is illuminated

to the cabinet

• Close proximity to heat source or direct sunlight

 

 

• Ambient temperature or humidity is very high

 

• Possible system leak, evaporator fan failure or

 

compressor failure

 

• Demo mode is active

 

• The actuator on the bottom of the door is not

 

making contact with the switch on the cabinet

 

 

Condensation on the cabinet or door

• Door is not shut properly or opened excessively

 

• Ambient temperature or humidity is very high

 

 

Alarm sounding and “LO” on the display panel

• Ambient temperature is excessively low

Alarm indicator light is illuminated

• Sensor failure

 

• Evaporator temperature is too low

 

 

Display is not functioning and interior light will

• The appliance may be operating in energy

not turn on

saving mode or Sabbath mode

 

 

9

+ 22 hidden pages