Danby DAC050MUB1GDB Manual

Loading...

OWNER’S USE AND CARE GUIDE GUIDE D’UTILISATION ET D'ENTRETIEN

GUÍA DE UTILIZACIÓN Y CUIDADO PARA EL PROPIETARIO

AIR CONDITONER

CLIMATISEUR

AIRE ACONDICIONADO

MODEL • MODÈLE • MODELO

DAC050MCB1GDB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9

2015.01.13

DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840

 

 

 

 

 

1-800-263-2629 (1-800-26-DANBY)

DO NOT

RETAILER

Dear valued

fulfills all

your

 

Please contact us

for any inquiries

 

 

NE PAS

LE

DÉTAILLANT SANS CONSIGNES SUPPLÉMENTAIRES

Cher(ère) client(e) important(e), nous espérons que votre produit Danby répond à tous vos besoins. Votre satisfaction est notre priorité!

Veuillez nous contacter au numéro gratuit de service après-vente, si vous avez des questions quelconques à propos de votre nouvel appareil.

NO DEVUELVA ESTA UNIDAD A LA TIENDA SIN

INSTRUCCIONES ADICIONALES

Estimado cliente, esperamos que el producto Danby que ha comprado satisfaga completamente sus necesidades. Su satisfacción

es nuestra prioridad!

Por favor, contáctenos gratuitamente a nuestro número de Servicio al Cliente para cualquier pregunta que tenga sobre su nuevo electrodoméstico.

Danby 28.08.2014

TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE REFERENCE.

_____________________________________________________________________

POUR OBTENIR LE SERVICE SUR GARANTIE VOUS DEVEZ FOURNIR UNE PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE POUR RÉFÉRENCE FUTURE.

_____________________________________________________________________

PARA OBTENER SERVICIO DE GARANTÍA, DEBE PROVEER UN RECIBO ORIGINAL. POR FAVOR ENGRAPE SU RECIBO A ÉSTA PÁGINA EN CASO QUE NECESITE HACER

IMPORTANT

This product is factory be plugged into a mating applicable local codes

responsibility and obligation National Electrical Code under any circumstances, any sign of damage. Do

ed by a qualified electrician

grounded plug. It must Electrical Code and receptacle, it is the accordance with the

prong should not, when they show

checked and test-

IMPORTANT - MÉTHODE POUR LA MISE À LA TERRE

Ce produit arrive d’origine avec un cordon d’alimentation équipé d’une prise à trois fiches. Il doit être branché dans une prise avec une fiche de mise à la terre en conformité avec le Code national de l’électricité et les codes et règles locaux applicables. Si la prise murale n’a pas de mise à la terre, il est de la responsabilité et l’obligation du client de changer la prise existante pour la rendre conforme au Code national de l’électricité et aux codes et règles locaux applicables. La fiche de mise à la terre ne doit pas, en aucune circonstance, être coupée ou retirée. Si vous apercevez des signes de dommage, n’utilisez jamais le cordon d’alimentation, la prise ou l’appareil. N’utilisez jamais l’appareil avec une rallonge sauf si elle a été vérifiée et testée par un électricien qualifié ou un fournisseur de matériel électrique.

IMPORTANTE - MÉTODO DE CONEXIÓN A TIERRA

Este producto viene equipado con un cable eléctrico que tiene un enchufe de tres patas conexión a tierra. Este debe colocarse en una toma de corriente con conexión a tierra de acuerdo con el Código nacional de electricidad y códigos y ordenanzas locales correspondientes. Si el circuito no cuenta con una toma de corriente con conexión a tierra, es responsabilidad y obligación del cliente sustituir la toma de corriente actual de acuerdo con el Código nacional de electricidad u códigos u ordenanzas locales correspondientes. Bajo ninguna cicunstancia se debe cortar o eliminar la tercera pata de conexión a tierra. Nunca utilice el cable, el enchufe o el artefacto cuando muestre un signo de daño visible. No utilice el artefacto con una extensión salvo que un proveedor eléctrico o electricista calificado la inspeccione y la pruebe.

CONTENTS

TABLE DES MATIÈRES

ÍNDICE

AIR CONDITIONER

 

Owner’s Use and Care Guide ................................

1-10

Welcome

Important Safety Information

Features

Installation Instructions

Operation Instructions

Care and Maintenance

Troubleshooting

Warranty

CLIMATISEUR

Guide d’utilisation et d’entretien du propriétaire....

Bienvenue

Consignes de

Caractéristiques

Consignes d’installation

Consignes d’utilisation

Soins et entretien

Dépannage

Garantie

AIRE ACONDICIONADO

Guía de utilización

Bienvenido

Información importante

Características

Instrucciones de instalación

Instrucciones de funcionamiento

Cuidado y mantenimiento

Solución sugerida

Garantía

CAUTION:

Read and follow all safety rules and operating instructions before first use of this product.

PRÉCAUTION :

Veuillez lire attentivement les consignes de sécurité et les instructions d’utilisation avant

.

:

relgas de seguridad y antes de usar

vez.

Model • Modèle • Modelo

DAC050MCB1GDB / DAC050MUB1GDB

WELCOME

Welcome to the Danby family. We are proud of our quality products, and we believe in dependable service, like you will find in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best of all, you will experience these values each and every time you use your Danby appliance. That is important, because your new appliance will be a part of your family for a long time.

For easy reference, we suggest you attach a copy of your sales slip/receipt to this page, along with the following information, located on the manufacturer’s nameplate on the right side of the unit above the powercord.

Note the information below; you will need this information to obtain service under warranty. To receive service, you must provide the original receipt.

NOTE: THIS UNIT IS NOT DESIGNED FOR “THROUGH-THE-WALL” INSTALLATION.

Model No:

Serial No:

Date Purchased:

appliance.

Save time and money:

Check the Troubleshooting section at the end of the guide before calling. This section helps you solve common problems that may occur.

If you do need service, you can relax, knowing help is only a phone call away.

1-800-26- (1-800-263-2629)

WARNING

Improper connection of the grounding plug can result in risk of fire, electric shock and/or injury to persons associated with the appliance. Check with a qualified service representative if in doubt that the appliance is properly grounded.

1

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

ELECTRICAL

REQUIREMENTS

1.All wiring must comply with local and national electrical codes and must be installed by a qualified electrician. If you have any questions regarding the following instructions, contact a qualified electrician.

2.Check available power supply and resolve any wiring problems BEFORE installing and operating this unit.

3.This 115V air conditioner uses 4.8 or less nameplate amps and may be used in any properly wired, general-purpose household receptacle. See Table 1 for the specifications for the individual branch circuit.

4.For your safety and protection, this unit is grounded through the powercord plug when plugged into a matching wall outlet. If you are not sure whether your wall outlet is properly grounded, please consult a qualified electrician.

5.

The wall outlet must

NOT use plug adapters.

 

See Table 2 for receptacle

 

6.

The rating plate on the

located on the right side of

 

the unit, above the

 

AWGAmerican Wire Gauge

*Based on copper wire at 60°C temperature rating

TABLE 2

Receptacle and Fuse Types

Rated Volts

125

Amps

15

Wall Outlet

 

 

 

 

 

 

 

Fuse Size

15

Time Delay Fuse

Plug Type

(or Circuit Breaker)

 

 

 

 

 

2

IMPORTANT SAFETY INFORMATION

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

FOR YOUR SAFETY: Read these instructions carefully before operating the unit.

ENERGY

SAVING TIPS

Your appliance is designed to be highly efficient in energy savings. Follow these recommendations for greater efficiency.

1.Select a thermostat setting that suits your comfort needs and leave at that chosen setting.

2.The air filter is very efficient in removing airborne particles. Keep the air filter clean at all times. (Usually cleaned every 2 weeks depending on indoor air quality.)

3.Use drapes, curtains or shades to keep direct sunlight from penetrating and heating the room, but do not allow drapes or curtains to obstruct the air flow around the unit.

4. Start your air conditioner

discomfort while the unit is

cooling the room.

 

FEATURES

Interior Air Outlet

Cabinet

 

Control Panel

Exterior

 

Air Inlet

Interior Air Inlet

 

 

 

 

 

Air Filter

 

 

 

 

3

INSTALLATION INSTRUCTIONS

ELECTRIC SHOCK HAZARD

To avoid the possibility of personal injury, disconnect power to the unit before installing or servicing.

NOTE: Your Room Air Conditioner is designed for easy installation in a single or double-hung window. This unit is NOT designed for vertical (slider type) windows and/or through-the-wall applications.

TOOLS NEEDED FOR INSTALLATION:

Screwdrivers: Phillips and flat head.

Power Drill: 1/8” (3.2mm) diameter drill bit

Pencil

Measuring Tape

Scissors

Carpenter’s Level

NOTE: Save the shipping carton and packing materials for future storage or transportation. From

the carton, remove the

in-

stallation of your air

corre-

sponding model check

 

 

 

Because the

side

will be heavier and

of

the unit can result

it

is recommended

unit.

 

 

INSTALLATION

 

screws (7)

Safety Lock (1)

 

Fig. 1

1/2in. (13 mm)

 

HARDWARE

3/8in. (9.5mm) screws

“L” Shaped

 

 

(4) *Factory installed

mounting

 

 

on some models

bracket (1)

 

 

 

* Factory installed

 

 

 

on some models

 

 

 

Sash bracket (2)

 

 

Adhesive

 

 

 

Foam Seal(1)

 

 

 

Side Curtain RH (1)

 

 

Side Curtain LH (1)

 

 

 

Regular

 

 

 

Foam Seal(1)

 

4

INSTALLATION INSTRUCTIONS

LOCATION

1.This room air conditioner is designed to fit easily into a single or double hung window. However, since window designs vary, it may be necessary to make some modifications for safe, proper installation.

2.Make sure window and frame are structurally sound and free from dry and rotted wood.

3.For maximum efficiency, install the air conditioner on a side of the house or building which favours more shade than sunlight. If the unit is in direct sunlight, it is advisable to provide an awning over the unit.

4.Provide sufficient clearance around the cabinet to allow for ample air circulation through the unit (See Fig. 2). The rear of the unit should be outdoors. It should not be in a garage, or inside a building. Keep unit as far away as possible from obstacles/obstructions and at least 30” above the floor or ground. Curtains and other objects within the room should be prevented from blocking the air flow.

5.Be certain that the proper electrical outlet is within reach of the installation. Use only a single outlet circuit rated at 15 amps. All wiring should be in accordance with local and national electrical codes.

6. DO NOT install unit

 

fail to operate in air

containing oils (including

 

 

NOTE: Your unit is designed

 

extreme humidity con-

ditions, excess condensation

 

installed where conden-

sation run-off cannot drip

 

 

NOTE: It is normal for your

 

days.

 

 

 

 

 

 

(50.8 cm)

Min

12 in. (30.5 cm) Min

20 in.

(50.8 cm) Min

 

 

 

 

 

 

 

 

 

 

 

 

 

30

in. (76.2 cm)

Fence,

 

Side

 

wall, or

 

 

 

Min

 

Obstruction

 

 

 

other

 

 

 

 

 

 

 

obstacle

 

 

 

 

 

 

 

 

 

 

Ground

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Danby DAC050MUB1GDB Manual

INSTALLATION INSTRUCTIONS

ASSEMBLY AND

INSTALLATION

1.

Assembly of the upper channel to the cabinet (factory installed on some units).

“L” Shaped Top Channel: install the “L” shaped channel to the top of the cabinet as shown in Fig. 3, using four (4) 3/8”

 

screws.

2.

Assembly of the side curtains to the cabinet.

Extend the shutter from the shutter frame and slide it into the shutter tabs on the side channel of the air conditioner, as shown in Fig. 4.

Slide the shutters into the top (“L” shaped) and bottom (“U” shaped) channels. The shutters are identified (on frame) as left and right.

Fig. 3

 

 

 

 

Fig. 4

 

 

3/8” screws

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Slide

down

into

 

 

tabs

 

 

 

 

 

3.

Completing the

 

 

 

 

Carefully place the air

top) positioned in front

 

of the upper window

portion of the window

 

frame. Pull the window

mounting bracket (See

 

Fig. 5).

 

 

Expand the shutter frames (fully) on each side and secure the top of the frames to the window sash using one 1/2” screw on each side and one in the “L” shaped mounting bracket (Fig. 5).

Secure the shutter clamp on each side of the lower part of the shutter, and secure to window sill using one 1/2” screw on each side (Fig. 5).

Place the second foam sealing strip to fit the opening between the inside and outside windows, then attach the safety lock to the outside window frame using one 1/2” screw (See Fig. 6).

PLEASE NOTE: Window applications come in a variety of different styles. Therefore, it may be necessary to modify your particular installation.

 

 

 

 

Fig. 6

 

 

 

Fig. 5

 

 

Window sash

 

 

 

 

 

 

 

 

 

 

 

 

Safety Lock

 

 

 

 

 

 

 

Foam Seal

 

 

 

 

 

 

 

1/2” screws

 

 

 

 

 

 

1/2” screw

“L” Shaped

Mounting

Bracket

Shutter clamps

6

OPERATING INSTRUCTIONS

ASSEMBLY AND INSTALLATION

Fig. 7

Check that the air conditioner is tilted downwards to the outside, about 3° to 4°, as shown in Fig. 7. After proper installation, condensed water should not drain from the overflow drain hole during normal use. If you notice water leaking out, check the angle of tilt, and make any necessary adjustments. However, on a very humid day, water leakage can occur – this is normal.

Measure the tilt angle from the cabinet’s edge. The distance H should be approximately 5/8” to 3/4”.

CONTROLS

Measure the tilt angle from the cabinet’s edge

: approximately 5/8” to 3/4”

WINDOW

FAN SPEEDS:

LOW FAN will circulate air at minimum speed without cooling.

HIGH FAN

will

 

SELECTOR SWITCH: The

knob to one of the two

settings described below.

 

COOLING MODES:

 

 

LOW COOL

 

-time use.

HIGH COOL

 

cooling or for extremely

 

hot days. Once room

 

OFF shuts the unit

NOTE: Always allow 3 minutes before switching from one mode to another.

THERMOSTAT: The thermostat automatically controls the (compressor) cooling cycle and maintains the selected room temperature. To set the thermostat, rotate the thermostat knob to the desired cooling setting (1 warmest - 7 coldest).

IMPORTANT

Turn the selector switch slowly, allowing the unit to adjust. When using THERMOSTAT, be sure to allow three minutes before changing the temperature. Adjusting too quickly may cause compressor to overload.

Thermostat

Selector OFF

Switch arrêt

7

+ 25 hidden pages