INSTRUCTION MANUAL |
|
,,yy |
,y |
DTQ 25S2FCV |
|
DTQ 27S2FCV |
|
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION
CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
NOTE TO CATV SYSTEM INSTALLER
THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820-40 OF THE NEC THAT PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR, SPECIFIES THAT THE CABLE GROUND SHALL BE CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.
CAUTION
The AC power cord provided with this product is polarized (one blade wider than the other).
To provide power to the TV, insert the AC plug into a standard 120V 60Hz polarized outlet.
NOTE
Never connect the plug to an electrical source other than one providing 120V 60Hz power. Use only the attached power cord. If the polarized AC cord does not fit into a non-polarized outlet, do not cut or file the blade. You are responsible for having the obsolete outlet replaced with a polarized outlet.
If you feel a static discharge when touching the unit, and the unit does not function, simply unplug the unit from the outlet. When you plug the unit back in, it should work normally.
Do not install power cords near any heating element or cooking appliances.
Daewoo Electronics
Corporation of America
120 Chubb Avenue,
Lyndhurst, NJ 07071
1-800-DAEWOO8 (1-800-323-9668)
Fax:201-935-5284
Dear Customer :
Daewoo Electronics Corporation of America would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent performance for many years to come.
We realize that you’re eager to turn it on and begin enjoying the high-quality pictures it delivers just as quickly as possible, but we ask you to take a few minutes to read the instructions in the booklet to familiarize yourself with the receiver, its functions and some features which may be new to you. If you follow the instructions, this unit should give you many years of viewing pleasure.
If for any reason it does not, we want to hear about it. Please write to us at the address above. Daewoo always welcomes comments and suggestions on this or any of our other products.
On the other hand, when you discover the enjoyment, reliability and ease of use that is built into it, we hope that you will tell your friends, and consider Daewoo when you make your next purchase of home entertainment equipment.
In addition to TV receivers, Daewoo produces a full line of audiovisual products built to the same high design, engineering, and manufacturing standards as this unit.
Here are a few tips that will keep your TV receiver looking great and performing for years to come.
●Avoid putting it in excessively hot locations. Damage to the cabinet or premature component failures can result.
●There are ventilation holes in the bottom and rear of the cabinet. Make sure that they remain unobstructed. Do not place the receiver on top of a thick cloth.
●If you don’t plan to use the receiver for several days, it’s a good idea to unplug it from the power outlet.
●Many common household cleaning agents, sprays, solvents, and polishes will cause permanent damage to the surface of the cabinet. The best cleaning agents are mild soap and a damp cloth.
Again, thank you for choosing this Daewoo product. We have employed advanced engineering techniques in its design, and manufactured it in one of the world’s most up-to-date production facilities. The result is a TV receiver that we know you will be as proud to own as we were to create.
Very truly yours,
DAEWOO ELECTRONICS
CORPORATION OF AMERICA
CONTENTS
Table of Contents
Important Safeguards |
2 |
Chapter 1: Overview of Your Equipment |
4 |
Your TV's Front Panel |
4 |
Your TV's Back Panel |
4 |
Your Remote Control |
5 |
Installing your remote control batteries |
6 |
Notes |
6 |
Chapter 2: Connecting an Antenna or Cable to Your TV |
7 |
Connecting an Antenna |
7 |
Connecting a Cable System |
8 |
Connecting Other Pieces of Equipment |
9 |
Safety Note |
9 |
Chapter 3: Operating Your TV |
10 |
Turning your TV On |
10 |
Programming Your TV's Channel Memory |
10 |
Changing Channels |
11 |
Changing the Volume |
11 |
Changing The TV's Channel Memory |
11 |
Adding a channel to memory |
11 |
Erasing a channel from memory |
12 |
Changing the TV's channel memory with the menus |
12 |
Changing the TV’s Input |
13 |
Changing the TV’s Input with the remote control |
13 |
Displaying the Current Channel |
13 |
Adjusting Video Settings |
14 |
Returning to factory settings |
15 |
Descriptions of video settings |
15 |
Chapter 4 : Setting the Sound |
16 |
Changing the Sound Mode |
16 |
Chapter 5: Using Timer Functions |
17 |
Accessing the Timer Menu |
17 |
Setting the Clock |
17 |
Setting the On Timer |
18 |
Setting the Off Timer |
18 |
Canceling the On Timer or Off Timer |
19 |
Setting the Sleep Timer |
19 |
Chapter 6 : Additional Features |
20 |
Changing the Language of the On-Screen Menus |
20 |
Captioning |
20 |
About captions |
21 |
Parental Control Settings |
22 |
Protection Features |
26 |
Automatic blue screen |
26 |
Automatic power off |
26 |
Chapter 7 : Troubleshooting |
27 |
Warranty |
28 |
Table of Contents 1
S A F E T Y
IMPORTANT SAFEGUARDS
PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER.
1Read all of these instructions.
2Save these instructions for later use.
3Unplug this television equipment from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4Do not use attachments not recommended by the television equipment manufacturer as they may result in the risk of fire, electric shock or other personal injury.
5Do not use this television equipment near water, for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, or the like.
6Do not place this television equipment on an unstable cart, stand, or table, The television equipment may fall, causing serious injury to a child or adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manufacturer, or sold with the television equipment. Wall or shelf mounting should follow the manufacturer's instructions, and should use a mounting kit approved by the manufacturer.
6A An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surface may cause the appliance and cart combination to overturn.
7Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the television equipment; and to protect it from overheating, these opening, must not be blocked or covered. The opening should never be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. (This equipment should never be placed near or over a radiator or heat register.) This television equipment should not be placed in a built-in installation such as a bookcase unless proper ventilation is provided.
8This television equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your television dealer or local power company.
9This television equipment is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
10Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will be abused by persons walking on it.
11Follow all warnings and instructions marked on the television equipment.
12For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the equipment due to lightning and powerline surges.
2 |
safeguards |
13An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
14Do not overload wall outlets and extension cords as this can result in fire or electric shock.
15Never push objects of any kind into this television equipment through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television equipment.
16Do not attempt to service this television equipment yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
17Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
(a)When the power-supply cord or plug is damaged or frayed.
(b)If liquid has been spilled, or objects have fallen into the television equipment.
(c)If the television equipment has been exposed to rain or water.
(d)If the television equipment does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV receiver to its normal operation.
(e)If the television equipment has been dropped or the cabinet has been damaged.
(f)When the television equipment exhibits a distinct change in performance - this indicates a need for service.
18When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
19Upon completion of any service or repairs to this television equipment, ask the service technician to perform safety checks to determine that the television is in a safe operating condition.
20If an outside antenna or cable system is connected to the television receiver, be sure the antenna or cable system is grounded so as to provided some protection against voltage surges and builtup static charges.
Section 810 of the National Electrical Code, ANSI/NFPA N0.70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antennadischarge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ANTEENNA |
LEAD IN |
WIRE |
GROUND |
|
|
CLAMP |
|
|
|
ANTENNA |
|
ELECTRIC |
DISCHARGE UNIT |
|
(NEC SECTION 810-20) |
||
SERVICE |
||
|
||
EQUIPMENT |
|
|
|
GROUNDING CONDUCTORS |
|
|
(NEC SECTION 810-20) |
|
|
GROUND CLAMPS |
|
POWER SERVICE GROUNDING |
|
NEC-NATIONAL ELECTRICAL CODE |
ELECTRODE SYSTEM |
|
(NEC ART 250, PART H) |
||
|
important safeguards |
3 |
CHAPTER 1
Overview of Your Equipment
con-
Your
Your TV's Back Panel
1Antenna terminal (ANT)
Use this terminal to attach an antenna or cable system to your TV.
2Video IN
This terminal allows the TV to receive a video signal from another component, such as a VCR.
3Audio L/Mono IN
This terminal allows the TV to receive an audio L/mono signal from another component, such as a VCR.
4Audio R IN
This terminal allows the TV to receive an audio R signal from another component, such as a VCR.
4 Chapter 1 : Overview of Your Equipment
Your Remote Control
|
1 |
2 |
|
3 |
3 |
4 |
|
2 |
|
5 |
7 |
6 |
|
8 |
|
9 |
10 |
11 |
13 |
12 |
|
1POWER
Use this button to turn your TV on or off.
2VCHW
Use these buttons to change channels on your TV, or select items in the menu system.
3CVOLB
Use these buttons to change your TV's volume, to activate selections in the menu system, or to change audio and video settings.
4MENU
Use this button to turn the TV's menu system on and off.
5RECALL
Press this button to display the channel number.
6ADD/ERA
Use this button to add a channel to the TV's memory or erase the channel from memory.
7MUTE
Use to turn the TV's sound on and off.
80-9
Use these buttons to change channels.
9SLEEP
Use this button to program the TV to turn off after a certain time.
10PREV. CH
Press this button to return to the previous channel you were watching.
11TV/VIDEO
Press this button to select the TV’s Input (TV or VIDEO).
12AUTO. PICT
Press this button to return the TV's video settings to their original level.
13AIR/CABLE
Use the button to set up your TV to receive signals from an antenna (AIR) or a cable system (CABLE).
Chapter 1 : Overview of Your Equipment |
5 |
Installing your remote control batteries
1Open the battery compartment on the back of the remote control.
2Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly.
3Replace the cover.
1 |
2 |
3 |
Notes
Do not mix different types of batteries, or mix an old and a new battery.
Remove and replace weak batteries. Weak batteries can leak and damage your controller. Dispose of batteries properly; never throw them into a fire.
Point your remote at the receiver on the center of the front of the TV. Make sure the receiver is not blocked.
The remote control can operate up to 30 feet away from the TV, if you are directly facing the front of the TV. Operating distance diminishes as you move to the sides of the TV
6 Chapter 1 : Overview of Your Equipment
CHAPTER 2
Connecting an Antenna or Cable to Your TV
Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown below, not all of them.
All connections will be made to the antenna terminal on the back of your TV. The antenna terminal is a silver metal post partially surrounded by two plastic tabs. For help in locating the antenna terminal, see “Your TV's Back Panel” on page 4.
There is no rod antenna (“rabbit ears”) provided with your TV.
Connecting an Antenna
If your antenna ends in a single coaxial lead, simply press or screw the cable onto the antenna terminal on the back of your TV.
If your ohm then
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Chapter 2 : Connecting an Antenna or Cable to |
|||||||
Loading...