Daewoo DT-4220 NH, DT- 4280NH User Manual

3.84 Mb
Loading...

PLASMA DISPLAY

USER’S MANUAL

D T - 4 2 8 0 N H

D T - 4 2 2 0 N H

Helpline Number : 0870 100 2525

Proper use guarantees product life.

Before using the product, be advised that you read this owner’s manual well and try to operate it.

Features

42” VGA wide Plasma Panel

Built in Analog Tuner

PDP has the analog tuner inside for watching terrestrial broadcasting without the need to purchase a separate broadcasting receiver.

DVD Direct Connection / Outstanding Picture Quality via a Digital Broadcast Receiver

A DVD can be directly connected to the unit so that you can view clear digital images. You can enjoy even higher quality images by connecting a digital broadcasting receiver with which digital broadcasts can be viewed.

• A PC Direct Connection

PC can be connected to the PDP without a separate device and can be used as a monitor making it ideal for presentation, various events and exhibitions.

160o Wide-Angle Viewing Area

Flat Panel with No Distortion and Colour Blurring

Since Plasma TV has no problems such as distortion, blurring, flickering unlike existing CRT type displays you can enjoy Home Cinema picture quality and sound.

• Various Video Control

- 17 Languages OSD - 20 Step screen zooming function - Full-screen still function

-Various aspect ratio (16:9, 4:3, Auto, Enlarge LB, Enlarge LBS, Panorama)

Free Volt (100-240V~, 50/60Hz)

DVI (Digital Visual Interface) Connection

When connected to a PC, you can receive DVI digital signals as well as the former analog signals by using DVI input and D-Sub input. Furthermore, using the DVI Input, you can receive directly a digital signal from the computer. Consequently, pictures on the screen are much more clear and fresh.

• CCF(Capsulated Colour Filter) Technology for natural colour

CCF Technology makes the picture clearer by controlling of the brightness among three different colour

filters.

• MGDI (Meta Genuine Digital Image) Engine

MGDI is the image enhancement technology of Daewoo Electronics, which provides more clear, splendid,

and delicated images.

This Owner’s Manual presents safety precautions and how to use the product. After reading it thoroughly, use the product safely.

Keep this manual where the user can see it easily.

Failure to comply with warnings and cautions for the safe use of electric appliances may cause fire or human injury.

Safety Precautions

Always obey all safety messages.

All the safety and operating instructions should be read before the product is operated. If anything strange happens, unplug this product from the wall outlet.

Do not disassemble or replace any parts of the TV.

Refer to a qualified service personnel for repair.

WARNING

You can be Killed or seriously injured if you do not follow these instructions.

Power

During a lightning storm, or when it is left unattended and unused for a long period of time, unplug it from the wall outlet.

It can result in fire.

This product must be properly grounded.

Improper grounding may cause malfunction or electric shock.

When proper grounding is not possible, install circuit breaker.

Do not ground to gas pipe, water pipe, lightning rod, or telephone line.

Installation

Do not use this product in the neighborhood of a bath or shower.

It can result in electric shock or fire.

When unplugging your TV, always grip plug firmly and pull straight out from the socket.

It can result in fire or electric shock due to damaged power cord.

During a lightning storm, unplug the TV from the wall outlet, and do not touch the antenna.

It can cause fire or electric shock.

Do not place this TV on an unstable cart, stand, or table

It may cause the product and cart to overturn, damaging equipment or causing possible injury.

4

The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Spilled liquids may cause electric shock or fire.

Do not disassemble batteries, and do not leave around in case children swallow them.

Heavy metal may contaminate environment, and can be harmful or detrimental to human health. (If children swallow the batteries, go to hospital and consult with a doctor.)

Batteries could explode if Fitted incorrectly. Align the batteries according to the (+) and (-) indication inside the case.

During Use

Do not open the cover (or back) because high voltage is present within the TV enclosure.

It may cause electric shock.

Do not allow children to play or hang on the TV.

These actions may tip it over, causing personal injury.

Do not spray water Onto the TV wipe with damp cloth.

It may cause an electric shock or fire

Never push any kind of objects into this product through openings at the back of TV.

It may cause fire or electric shock.

Do not place a candle or lighted cigarette on the TV.

If these fall into the inside of the tv, it may cause a fire or explosion.

Unplug the TV from the wall outlet when smoke or a strange smell occurs, then refer to a service personnel.

Leaving the TV on in this condition, may cause fire or electric shock.

5

Safety Precautions

Always obey all safety messages.

All the safety and operating instructions should be read before the product is operated.

CAUTION

You can be injured, or this product or any other of your property can be damaged if you don’t follow instructions.

Power

When moving your TV, remove the power plug, antenna, and cables, and be sure to move it by using two people..

Failure to follow this instruction can result in electric shock or personal injury.

Installation

Do not install the product where there is oil, smog, moist, or dust

It may cause malfunction.

For proper ventilation, separate the product from the wall, and keep a distance of more than 10cm (4).

Due to the increase of temperature inside the TV,

If you wish to wall or ceiling,

Failure to do so may and injury to human

Do not touch the power plug with wet hands when plugging or unplugging it into the wall socket.

It can result in a risk of electric shock.

where it will be exposed to product should not be radiators, stoves, etc.

Minimum distances around the apparatus for sufficient ventilation.

Due to the increase of temperature inside the TV, it may cause fire.

When using an outside antenna system, do not install it in the vicinity of overhead power lines.

If the antenna touches such power lines, it may cause electric shock.

6

The plasma display panel consists of fine cells. Although the panels are produced with more than 99.9 percent active cells, there may be some cells that do not produce light or remain lit.

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent ghost image to remain on the Plasma Display.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

The warranty does not cover any damage caused by image retention.

When TV is service

When the period of malfunction

During Use

Do not wipe the TV using a cloth damped with chemicals (benzene, thinners, etc.).

The TV appearance may be marred. (Unplug the power plug and wipe with soft cloth.)

Do not place any object or cover on the TV.

In an event of improper ventilation, the TV will be overheated causing fire.

When the TV is placed table, the front side not project outward.

Unbalance may cause resulting in personal injury malfunction and damage

Do not place heavy objects or heat sources on the power cord.

It may damage the power cord, causing fire or electric shock.

When watching the TV, the distance between the TV screen and your eye should be as 5~7 times as the diagonal distance of the TV.

Watching the TV for a long time may hurt your eye sight.

Do not grip speakers when moving the TV attached with speakers.

When moving the TV while gripping speakers, the speakers may fall from the TV due to its weight, causing personal injury.

7

Checking Accessories

Note

Check to be sure that the following items are

packed with your Plasma panel.

Supplied Accessories

1UNIT

Ferrite Core

3UNITS

ZOOM +

P

REV PR

1UNIT

 

Place the small ferrite

 

cores in the speaker

 

cables close to the

 

speaker terminals of

 

the PDP unit.

Scart(1 unit)

Speaker(2 units)

UNITS

AC Cable 1 UNIT

8

Optional Accessories

Speakers

DT-P20J

DT-P55P

DT-T20G

DT-T55M

Wall Mounting Unit

Note

The following items are optional accessories. Refer purchasing optional accessories from Daewoo Electronics Local retailer or the retailer from where you purchased the unit.

DT-P20J

-Speaker Main Unit Dimension : 100(W) x 628(H) x 83(D) mm 39.37(W) x 24.72(H) x 3.27(D) inch

-Dimension Including Speaker Stand : 170(W) x 729(H) x 194(D) mm 6.69(W) x 28.7(H) x 7.64(D) inch

-Audio Amplifier : 10W + 10W

-Impedance : 8Ω

-Weight : 6.4kg(14.11 Lbs)

DT-P55P

-Speaker Main Unit Dimension : 100(W) x 628(H) x 88.5(D) mm 39.37(W) x 24.72(H) x 3.48(D) inch

-Dimension Including Speaker Stand : 210(W) x 704(H) x 210(D) mm 8.27(W) x 27.72(H) x 8.27(D) inch

-Audio Amplifier : 10W + 10W

-Impedance : 8Ω

-Weight : 3.5kg(7.72 Lbs)

DT-T20G

- Dimension : 667(W) x 212(H) x 320(D) mm 26.26(W) x 8.35(H) x 12.6(D) inch

- Weight : 7kg(15.43 Lbs)

DT-T55M

- Dimension : 720(W) x 189(H) x 310(D) mm 26.26(W) x 7.44(H) x 12.6(D) inch

- Weight : 4.5kg(15.43 Lbs)

DSP/DP-HG10, DSP/DP-HG20, DSP/DP-HG22

-Variable Angles : 0o, 10o, 15o, 20o

-Dimension : 601(W) x 592(H) x 35(D) mm

23.66(W) x 23.31(H) x 1.9(D) inch

- Weight : 4.5kg(10 Lbs)

9

CONTENTS

PREPARATION

4 • Safety Precautions

8 • Checking Accessories

12 • Panel Controls

13 • Remote control

14 • Remote control setup

CONNECTION

15 • Antenna Connection

18 • To Watch TV

20 • Install Program

26 • Watching Digital Broadcasts

28 • Watching Cable Broadcasts

30 • Watching Satellite Broadcasts

32 • Watching a DVD Image

34 • Watching a VCR Image

36 • Watching a Camcorder/Game Console Image

38 • Connecting PC(15Pin D-Sub)

40 • Connecting PC(DVI)

APPLICATION

 

 

 

 

 

 

43

• Selecting Picture Mode

59

• MENU Background, Language

 

44 • Customising Picture

 

and Child Lock Setting

 

46

• Adjusting Screen Size

61

• MGDI (Meta Genuine

 

 

 

(Component, AV, TV)

 

Digital Image)

 

48

• Adjusting Screen Size(PC, DVI) 63

• Time Setting

 

50

• Enlarging Screen Size

65

• Image Sticking

 

52

• Watching a Still Image

 

Minimisation(ISM)

 

53

• Adjusting Auto Sound Mode

67

• Initialise Setting

 

54

• Customising Sound Mode

69

• Setting Sleep Timer

 

56

• Selecting INPUT SIGNAL

70

• Teletext

 

58

• Checking the Current Input Signal

 

 

 

MISC.

72 • Before Requesting Service

73 • SPECIFICATIONS

11

Panel Controls

Front Panel, Back Panel, Remote Control

*Items having same names on Plasma display and the remote control would function in exactly the same way.

Front

ON/OFF STAND BY/OPERATE

Power control sensor Power Standby: Red - Standby

Green - ON

Select when adjusting volume or select/adjust “MENU.”

Press when moving “MENU” or “Program”

ON/OFF STAND BY/OPERATE

MOVE/PR

 

 

Select when adjusting volume

 

 

Power control sensor

 

or select/adjust “MENU.”

Power Standby: Red - Standby

Press when moving “MENU” or

“Program”

Green - ON

Power button

 

 

Rear

Position of

Ferrite Core

 

 

 

 

 

Right Speaker

Left Speaker

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

AUDIO

 

 

 

S-VIDEO

VIDEO

L

DVI-D INPUT

AV1

AV2

ANT

AV3

 

 

 

 

 

 

 

ANT

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO,

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT

D-sub)

(DTV/DVD INPUT jacks)

INPUT/OUTPUT,

 

A/V INPUT, manufacturing(or Speaker

 

 

 

 

Cable Receiver

 

Cable

manufacturer

 

 

 

 

INPUT/OUTPUT

 

Receiver

use only)

 

 

 

 

jacks

 

INPUT

 

 

 

 

 

 

 

 

 

 

 

jacks

 

 

 

12

Remote Control

*The number in ( ) indicates the page in which the function of each button is explained in detail.

TV/VCR/DVD/SAT/CATV

19 Channel number (0~9)

Use to select channel directly 0~9

58 RECALL

Indicates the current state and resolution.

56

Use this function to make video input selection. It changes in the following sequence TV -> AV1 -> AV2 -> AV3

50 ZOOM button

Used to zoom the screen. To enlarge, press the(+) button, and to return to the previous condition, press the(-) button.(Zoom Mode : Zoom 0~20)

20 Menu button

Used to display a desired menu.

Previous Program button

It returns to previous channel.

Mute button

Mute sound.

43 Picture Mode button

Whenever pressing the button, it cycles following order.

Normal -> User -> Cinema -> Dynamic

53 Sound Mode button

Whenever pressing the button, it cycles following order. modes: Normal -> Movie -> Music -> News -> User

TV VCR/DVD SAT CATV

RECALL

 

 

 

 

PR

 

 

 

M

-

 

 

 

 

 

Z

O

O

 

 

 

 

 

V

 

 

 

MENU

O

 

 

 

 

 

 

 

L

 

 

 

 

P

R

E

V

PR

PR

STILL

MULTIMEDIA

Z

 

 

 

 

 

O

 

 

 

 

 

O

 

 

 

 

 

M

 

 

 

 

 

+

 

 

 

 

 

V

 

 

 

 

 

O

 

 

 

 

 

L

 

 

 

S

I Z

E

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

E

 

 

 

E

 

 

 

 

R

 

 

 

 

 

C

 

 

 

 

 

S

 

 

 

 

 

SLEEP

?

X

PICT.

SOUND

 

MODE

MODE

I-II

F.R/SLOW PLAY F.F/SLOW STOP

OPEN/

PREV CLOSE NEXT PAUSE

Note

Use two “AAA” batteries.

Be sure to use replacement batteries of the same type as the original ones.

The life of a battery depends on how much it has been used.

Power button 19

Pressing the Power button of the TV allows the Display to be be in standby. (A red light is shown in the Remote Control Sensor.) At this time, if you press the Power button of the Remote Control, the Display is turned ON (And shows a green light in the Sensor).

Still 52

Used to view a still picture whilst watching moving images.(Sound can be heard.)

Multimedia 56

Use this function to make video input selections. It changes in the following sequence PC -> DVI - > Component 1-> Component 2 -> PC

PR button /

Adjusts the channel.

Volume button

/ Adjusts the volume.

Screen Size button 46

Adjusts the size of the screen (Normal, 16:9, etc.)

Sleep Timer 69

Each time you press this button, a different input mode appears. The sequence is as follows: 15Min. -> 30Min. - > 60Min. -> 90Min. -> 120Min. -> OFF

After the time is selected, the TV automatically goes into a stand-by state.

Teletext Function 70

l - ll

-Selects the language during dual language broadcast.

-Selects mono sound during stereo broadcast.

VIDEO/DVD Function

When Using Remote Control:

Be sure not to allow the Remote Control to drop or to become wet.

Keep it away from hot or moist locations.

Installing the Batteries in your Remote Control:

Push to open the cover of the remote controller

Put the batteries in the battery cell after checking the

13

Remote Control Setup

Remote control supporting the multi brand devices.

-The remote control provided is designed to operate the Daewoo PDP set.

-However, using the remote control, you can control the Cable Converter, VCR , DVD and Satellite Broadcasting Receiver of other brands after setting up the remote control.

Notices:

-All the preset codes are erased when replacing the battery. In this case, you must set the remote control again.

-Some of the products may not be applied because of different signal system.

-This is only for the basic control of the devices.

HOW TO SET UP THE REMOTE CONTROL FOR US ING OTHER DEVICES .

Turn on the Device. (Cable Converter, VCR , DVD or Satellite Broadcasting Receiver)

Press the device selection button of remote control until it is flickering. It takes about 3 seconds.

Press the assigned three digits code of the device using number key button of the remote Control toward the IR receiver of the device. The code number is provided below. Whenever pressing the number, the device selection button will be flicked once.

If the code is set properly, the device will turn off automatically. If not, repeat the process 3.

As the device is turned off, press the flickering device selection button of the remote control once. Then the lamp of the button will be turned off.

Now, the setting-up of the device can be controlled by Daewoo PDP remote control.

Remote Control Setup Code

 

VCR (STANDARD : 002)

 

 

 

 

 

 

 

SAT (STANDARD : 002)

 

 

 

 

 

 

 

 

 

 

Maker (Brand) Name

Code Number (3 digit) List

 

 

Maker (Brand) Name

Code Number (3 digit) List

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DAEWOO

002

008

060

062

063

067

 

 

DAEWOO

002

 

 

 

068

 

 

 

 

 

 

 

PANASONIC

030

 

 

JVC

003

006

009

043

044

046

 

 

PHILIPS

018 031 032

 

 

 

084

089

 

 

 

 

 

 

SAMSUNG

079

 

 

 

111

114

124

 

 

 

 

 

For more device codes, contact Daewoo

 

 

MITSUBISHI

046

052

075

122

 

 

 

 

 

 

PANASONIC

016

070

087

088

106

049

 

 

service centre

 

 

 

PHILIPS

005

040

042

045

048

 

 

 

 

 

 

 

053

064

 

 

 

 

 

 

 

 

 

 

 

078

081

090

108

 

 

 

 

 

 

 

 

SAMSUNG

041

055

056

059

061

065

 

 

 

 

 

 

 

066

091

095

 

 

 

 

 

 

 

 

 

SHARP

048

049

057

074

 

 

 

 

 

 

 

 

SONY

047

050

051

076

080

 

 

 

 

 

 

 

DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DAEWOO

152 160

 

 

 

 

 

 

 

 

 

 

LG

150 168 169

 

 

 

 

 

 

 

 

 

PANASONIC

157 170

 

 

 

 

 

 

 

 

 

 

PHILIPS

155

 

 

 

 

 

 

 

 

 

 

 

SAMSUNG

151 163 164

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

14

Antenna Connection

Indoor Antenna Connection

WHEN THE IMAGE IS NOT CLEAR

Unclear screen image and bad reception may be caused by wrong antenna connection. Be sure to check its direction or installing place.

1. Connect the back of the TV set.

Antenna Input

15

CTV Antenna Connection

TV Antenna installation may be found in most.

When a coaxial cable is used

Plug the coaxial cable to the antenna socket, and fix it firmly.

It is recommended to use the provided coaxial cable.

ANT/CABLE 1

Provided coaxial cable

When a feeder cable is used

ANT/CABLE 1

Outdoor Antenna Connection

Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses

Single Antenna Connection.

VHF Antenna

UHF Antenna

ANT/CABLE 1

Separate Antenna Connection.

ANT/CABLE 1

17

To Watch TV

To Watch TV

-The buttons on the keypad in the PDP unit, which have the same name as those on the remote controller, perform the same function as the remote controller.

Press the “ON/OFF” button of the PDP unit.

•The “ PR” or power button of the remote control and the keypad on the PDP unit would be operated only when the "AC Power" of the PDP unit is supplied. Otherwise, neither the remote controller nor keypad of the PDP unit can turn on the PDP.

When pressing the Program button

•Select two digits if using the number button for Program selection.

For example, to watch Program No.9, press the number buttons 0 and 9.

If pressing only number 9, it takes more time than pressing two digits for selecting a channel.

To mute the sound

1.Press the “ ” button.

2.No sound is heard if “MUTE” is displayed on the screen.

3.Sound is heard again if pressing the “ ” button once again.

For example, you can use this button when telephone rings or when guest comes while watching TV.

Check of TV operation status

If pressing the “Recall” button, the status of the Program or broadcasting being currently watched or entry status of video component is displayed on the screen.

Auto Power Off

If TV broadcast for the day is finished, the TV will automatically turn off after about 30 minutes. However, if the Off-time or Sleep time is operating, it takes precedence. This Auto Power Off feature only operates in the TV mode.

TV VCR/DVD SAT CATV

RECALL

 

 

 

 

PR

 

 

 

M

-

 

 

 

 

 

Z

O

O

 

 

 

 

 

V

 

 

 

MENU

O

 

 

 

 

 

 

 

L

 

 

 

 

P

R

E

V

PR

PR

STILL

MULTIMEDIA

Z

 

 

 

 

 

O

 

 

 

 

 

O

 

 

 

 

 

M

 

 

 

 

 

+

 

 

 

 

 

V

 

 

 

 

 

O

 

 

 

 

 

L

 

 

 

S

I Z

E

 

 

 

 

 

 

N

 

 

 

 

 

 

 

 

E

 

 

 

E

 

 

 

 

R

 

 

 

 

 

C

 

 

 

 

 

S

 

 

 

 

 

SLEEP

?

X

PICT.

SOUND

 

MODE

MODE

I-II

F.R/SLOW PLAY F.F/SLOW STOP

OPEN/

PREV CLOSE NEXT PAUSE

18

Press the “ON/OFF” button.

1

 

• Press the “ON/OFF” button of the

ON/OFF

PDP unit.

• The LED of the PDP unit turns on red colour.

• Press the “ PR” , power button of the remote control, or any button on the keypad of the PDP unit.

• The LED of the PDP unit turns on “green” colour and the TV

• To watch analog TV broadcasts, select the correct input, i.e. 'PR' in the on screen display box..

Select Program.

2

 

 

 

PR

 

 

 

 

 

 

 

• Select the desired program by

 

 

 

O

Z

 

M

 

 

 

pressing the “ PR ” button or

 

 

 

 

M

 

O

 

 

 

 

 

 

 

 

 

 

O

 

 

 

 

 

 

 

 

Z

O

 

 

 

 

+

the number button.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

V

 

 

MENU

 

 

 

 

 

 

V

Ex) Program 09

 

O

 

 

 

 

 

 

 

 

O

 

 

 

 

 

 

 

 

 

 

 

 

 

L

 

 

 

 

 

 

 

 

 

L

 

 

 

P

 

 

 

 

S

I

Z

E

 

 

 

 

 

 

 

 

 

 

 

R

 

 

N

 

 

 

 

 

 

E

 

 

 

 

 

 

 

 

 

 

V

 

E

 

 

 

 

 

 

 

 

 

P

E

 

 

 

 

 

 

 

 

 

 

R

 

 

 

 

 

 

 

 

 

 

 

R

C

 

 

 

 

 

 

 

 

 

 

 

 

S

 

 

 

 

 

 

 

PR

PR 09

_ _ _ _ _

MONO PM 12 : 00

Adjust volume.

3

 

 

 

PR

 

•Sound reduces if pressing the

 

 

 

M

O

“ VOL”

button.

 

 

 

 

 

Z

 

 

 

 

 

 

O

O

 

 

 

 

Z

O

M

• Sound increases if pressing the

 

 

 

+

 

 

 

 

 

 

 

 

 

 

 

V

 

 

MENU

V

“VOL

” button.

 

O

 

 

O

 

 

 

 

 

 

 

 

 

L

 

 

 

L

 

 

P

R

E V PR

PR

 

 

N

 

E

E

 

R

 

 

C

 

 

S

 

 

S

I

Z

E

Volume

 

10

 

 

 

4

Press the “Power” button to turn the TV off.

 

• TV turns off and the LED of

 

 

 

 

the PDP unit changes to red

 

 

 

colour.

 

 

 

 

 

 

19

+ 54 hidden pages