Daewoo DRVT-43, DRVT-40 User Manual

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` A

DVB-T VCR/DVD RECORDER

Instruction Manual

DRVT-40

DRVT-43

HELPLINE NUMBER

0870 100 2525

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 1

Safetyty InstructionsI t ti

Please keep the product’s guarantee sheet and receipt in a safe place.

Precautions

• Read this booklet carefully.

• Make sure the rating of your household electricity supply matches that shown on the back of your product.

• Read this page and chapter ‘Setting up your product’ to help you set up and adjust your product correctly.

•Do not put the product in a hot or humid place.

•Do not open the product. Get a qualified technician to carry out any

repairs.

• Do not connect the product to the power supply if you have just moved it from a cold environment to a warm room. This can lead to condensation inside the product, which can damage it. Wait for approx. 2 hrs for it to reach room temperature.

• Make sure the product is placed at least 10 cm apart from other home appliances or obstacles to ensure sufficient ventilation.

• The product should not be exposed to dripping or splashing and no objects filled with liquids, such as vases should be placed on top of the product.

• Before a storm and/or lightning, unplug the product from the mains supply and aerial.

• Put the product on a steady flat surface.

• Only clean the product with a soft, lint-free cloth. Do not use harsh or alcoholbased cleaning agents.

INTRODUCTION

For your own Safety

•There are no components in this product you can service or repair yourself.

•Do not open the case of the product. Only allow a qualified engineer to repair or service your product.

•This product is designed to work continuously. Switching it off (stand-by mode) does not disconnect it from the mains. To disconnect it from the mains you have to unplug it.

1

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 2

Important Safeguards

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated ‘dangerous voltage‘ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and servicing instructions in the literature accompanying the appliance.

WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION Any changes or modification in construction of this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

•Make sure the unit should be placed at least 10 cm apart from the other home appliances or the obstacles to get sufficient ventilation.

•This unit shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on this unit.

•Switching it off does not disconnect it from the mains (stand-by). To disconnect it from the mains, you have to unplug it.

IMPORTANT FOR LASER PRODUCTS

LASER This Digital Video Disc Recorder employs a Laser System. To ensure proper use of this product please read this owner’s manual carefully and retain for future reference. Should the unit require maintenance, contact an authorised service location - see service procedure.

Use of control adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure.

To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open and interlocks defeated.

DO NOT STARE INTO THE BEAM.

DANGER Visible laser radiation when open and interlock failed or defeated.

Avoid direct exposure to beam.

CLASS 1

LASER PRODUCT

CAUTION Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel.

RoHS (Directive 2002/95/EC) Compliant

This environment-friendly product does not contain the EU RoHS restricted substances (Pb, Hg, Cd, Cr6+, PBB, and PBDE).

2

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 3

Important Safeguards

This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing. This unit is fully transistorised and does not contain any parts that can be repaired by the user.

1READ INSTRUCTIONS

All the safety and operating instructions should be read before the unit is operated.

2RETAIN INSTRUCTIONS

The safety and operating instructions should be retained for future reference.

3HEED WARNINGS

All warnings on the unit and in the operating instructions should be adhered to.

4FOLLOW INSTRUCTIONS

All operating and use instructions should be followed.

5CLEANING

Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6ATTACHMENTS

Do not use attachments unless recommended by the unit’s manufacturer as they may cause hazards.

7WATER AND MOISTURE

Do not use this unit near waterfor example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.

8ACCESSORIES

Do not place this unit on an unstable, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child or adult as well as serious damage to the unit. Use this unit only with a cart, stand, tripod, bracket, or table recommended by the manufacturer.

9VENTILATION

Slots and openings in the case are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. These openings must not be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat radiator. This unit should not be

placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10POWER SOURCES

This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions.

11POWER-CORD PROTECTION

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, mains sockets, and the point where they exit from the unit. The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

12LIGHTNING

For added protection for this unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

13DISC TRAY

Keep your fingers well clear of the disc as it is closing. It may cause serious personal injury.

14OVERLOADING

Do not overload wall outlets of extension cords as this can result in a risk of fire or electric shock.

15OBJECT AND LIQUID ENTRY

Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or ‘short-out’ parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

16BURDEN

Do not place a heavy object on or step on the product. The object may fall, causing serious personal injury and serious damage to the product.

17DISC

Do not use a cracked, deformed or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction.

3

INTRODUCTION

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 4

Important Safeguards

18SERVICING

Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19DAMAGE REQUIRING SERVICE

Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions.

A.When the power-supply cord or plug is damaged.

B.If liquid has been spilled, or objects have fallen into the unit.

C.If the unit has been exposed to rain or water.

D.If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation.

E.If the unit has been dropped or the cabinet has been damaged.

F.When the unit exhibits a distinct change in performance-this indicates a need for service.

20REPLACEMENT PARTS

When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the unit manufacturer can prevent fire, electric shock, or other hazards.

21SAFETY CHECK

Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks recommended by the manufacturer to determine that the unit is in safe operating condition.

22WALL OR CEILING MOUNTING

The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

23HEAT

The product should be situated away from heat sources such as radiators, heat registers,

4

stoves, or other products (including amplifiers) that produce heat.

24SAFE BATTERY USAGE

To prevent battery electrolyte leakage, which may result in injury and damage to the unit or other objects, observe the following precautions;

A.All batteries must be installed with the proper polarity.

B.Do not mix new with old or used batteries.

C.Only use batteries of the same type and brand.

D.Remove the batteries when they are not to be used for a long period time.

E.When the batteries have become discharged, they must be disposed of in a safe manner which complies with all applicable laws.

25WEEE (Waste of electrical and electronic equipment)

The meaning of the symbol on the product, its

accessory or packaging indicates that this product shall not be treated as household waste. Please, dispose of this equipment at your applicable collection point for the recycling of electrical & electronic

equipments waste. In the European Union and Other European countries there are

separate collection systems

for used electrical and electronic product. By ensuring

the correct disposal of this

product, you will help prevent potential hazards to the environment and to human health, which could otherwise be caused by unsuitable waste handling of this product. The recycling of materials will help conserve natural resources. Please do not therefore dispose of your old electrical and electronic equipment with your household waste. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 5

Table of Contents

Introduction

Recording

Safety Instructions ____________________________1 Important Safeguards _________________________2 Table of Contents ______________________________5 Introduction____________________________________6 Overview Features ____________________________7 Identification of Controls ______________________12

Connections

Connecting Antenna/Cable ____________________17 Connecting a TV _______________________________17 Connecting an Amplifier/Receiver _____________19 Connecting Optional Equipment ______________19 Connecting to USB ____________________________20 Connecting a Digital Camcorder ______________20

Setup

Initial Installation ______________________________21 Guide to Digital Service________________________22 Information Service____________________________24 Setup menu____________________________________25

Setup Menu Overview	25
Menu Navigation	25
INSTALLATION Settings	25
RECORD/PLAY OPTIONS Settings	28
LANGUAGES Settings	29
Preferences Settings	30
Parental Settings	32
System Information	35
Update/ Restore	36

On-Screen Display Overview __________________37

Playback

DVD Playback _________________________________39 Playing a Picture or Music files _______________41

DivX Playback (DVD, USB)	41
Audio CD Playback	42
MP3 Playback	42
JPEG Playback	42

Playing MP3 files during a slide show 43

VCR Playback _________________________________44

Basic Recording________________________________46

Recording to TV	46
One Touch Record (OTR)	46
Checking the Recording Time	47
To Pause the Recording	47
One Touch Copy - DVD to VHS	47
One Touch Copy - VHS to DVD	48

Timer Recording _______________________________49

Timer Recording using Manual Record
Screen	49
Canceling a Timer Recording	50
Stopping a Timer Recording in
Progress	50
Timer Recording using the EPG
application	50
Canceling a Timer Recording (EPG)	51
Stopping a Timer Recording in
Progress	51
Timer Recording Troubleshooting	51

Recording from an External Input _____________52

Editing

Disc Playback and Editing _____________________53 Disc Media Operation__________________________56

Reference

Troubleshooting _______________________________59 Technical Specifications ________________________61 Warranty Card ________________________________63

5

INTRODUCTION

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 6

Introduction

Thank you for purchasing the DVB-T VCR/DVD recorder.

Equipped with the latest technology and design, the DRVT-40/DRVT-43 is a set-top box ideal for digital terrestrial broadcast reception and a VCR/DVD Recorder.

The simple installation and operation, user-friendly tree structured OSD, Digital audio output that’s Dolby Digital ready, and advanced video clarity made for TV that’s designed to enrich the viewer experience.

Outstanding stability and comfort are its built-in features.

In addition to delivering more channels with its new highly sensitive tuner, DRVT-40/DRVT-43 boasts the Electronic Program Guide (EPG), for even better program information on all channels, and information that enables access to subtitles and teletext for a bounty of useful information on programs and broadcast signals. As a DVB-T VCR/DVD recorder, our product supports ‘dual media’ recording allowing DVD+RW format recording (+VR) on either DVD-R, DVD-RW, DVD+R or DVD+RW media.

This system gives flexibility for the consumer to use any of the above media formats for recording in the same system.

With the latest software, viewers are always sure to enjoy endless hours of extraordinary digital broadcasts and an abundance of data.

6

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 7

Overviewi Featurest

Overview

Which discs you can use

MPEG-2 Digital & Fully DVB-T Compliant Interactivity & Digital Teletext (MHEG 5)

•Allows a split screen combination of your programme plus live text news & sport information.

User-friendly EPG (8 days capability)

•Extended information shows the full program information

•Channel Search with Category or Keyword

Parental control with block on system, all channels and programs by age limitation

Multiple Connectivity to Hi-Fi or Home Theatre Channel list mode in both all and favourite groups Channel sorting by Channel Number

Video format in 4:3 or 16:9

Supports audio language selection in SETUP

Program Recording

: Recording from TV tuner or AV input

The following discs can be used in your DVB-T VCR/DVD Recorder:

Playback and recording

DVD+RW (Digital Versatile Disc + ReWritable)

DVD+R (Digital Versatile Disc + Write-Once)

DVD-R (DVD-Recordable) / DVD-RW (DVDRewritable): Recording with +VR Format (Dual media support).

These discs can only be played back in other DVD players or recorders if the recording was made in ‘Video mode‘ and the recording was finalised.

Playback only

DVD Video (Digital Versatile Disc)

Audio CD (Compact Disc Digital Audio)

CD-R (CD recordable) Audio and MP3 files

CD-RW (CD rewritable) Audio and MP3 files

VCD, SVCD

•Automatically sets up timer recording using EPG

•Manually sets up timer recording for a TV program or a recurring TV program

•Timer setting supports automatic Turn-On and Off daily or weekly

Personal video copying by external input

•DV camcorder tapes

•VCR tapes

Not all recordable CDs may be played by your player.

Simple, easy video editing

•Rename programs, Delete programs, Split programs, Segment programs

•Identify and keep the desired video and remove the parts you do not need.

DVD Playback

DVD, VCD, SVCD, MPEG file video, MPEG-1 Layer 2, MP3, CD stereo audio, Dolby Digital & DTS digital audio output.

INTRODUCTION

7

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 8

Overview Features

Regional code

Track (Audio CD only)

If the region number on your DVD disc does not correspond to the region number of this player, the disc cannot be played.

Sections of a musical piece on an audio CD. Each track is assigned a number, enabling you to easily locate the track you want.

2	ALL	DVD, DVD+R, DVD+RW?

What is a DVD?

Dual Media

Supporting Disc	±RW / ±R
Recording Format	±Disc + VR format
Finalise required for	-RW, -R, +R
Compatibility with other Players
	All discs compatible after
	finalising
Consumer	Does not need selection
	(recording format)

Remark :

DRVT-40/ DRVT-43 DVB-T VCR/DVD Recorder supports ‘dual media’ recording allowing DVD+RW format recording (+VR) on either DVD-R, DVD-RW, DVD+R or DVD+RW media. Any editing feature that is available with the +RW logical format is available on any of the media types. This system allows the flexibility for the consumer to use any of the above media formats for recording in the same system. Since the +VR format is DVD-Video compatible, the consumer can take any disc recorded on this platform and should be capable of playing it back on the majority of DVD players on the market.

Disc-related Terms

Title (DVD only)

The main film, accompanying feature content, or music album. Each title is assigned a title reference number enabling you to locate it easily.

Chapter (DVD only)

Sections of a movie or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a number to enable you to easily locate the chapter you want. Depending on the disc, chapters may not be labeled.

DVD (Digital Versatile Disc) is a storage medium that combines the convenience of the compact disc with the latest digital video technology. DVD video uses modern MPEG2 data compression technology that enables an entire feature film to be stored on a single five inch disc.

How good is the resolution of DVD compared with VHS?

The razor-sharp digital images have more than 500 lines of resolution at 720 pixels per line. This is more than twice as high as VHS and even better than laser disc quality. DVD picture quality is easily comparable to the digital masters produced in recording studios.

What is a DVD+RW?

DVD+ReWritable uses ‘phase change‘ media, the same technology on which rewritable CDs are based. A high-performance laser is used to change the reflective properties of the recording layer; this process can be repeated more than a thousand times.

What is a DVD+R?

Unlike a DVD+RW disc, a DVD+R (write-once DVD) can only be written to once. If it is not finalised after a recording, further recordings can be added to it. Old recordings can be deleted but they can no longer be overwritten. The deleted recordings (titles) are marked 'deleted title'.

Before a DVD+R can be played in a DVD player, it must be finalised in the DVB-T VCR/DVD Recorder. Once this process is complete, no further recordings can be added.

What can I do with my DVB-T VCR/DVD Recorder?

Your DVB-T VCR/DVD Recorder is a machine for recording and playing back digital video discs with ‘two-way‘ compatibility with the universal DVD video standard. This means:

8

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 9

Overview Features

•existing DVD video discs can be played on the recorder.

•recordings made on your DVB-T VCR/DVD Recorder can be played on other DVD video players and DVD-ROM drives.

About DVD Recording

Notes on Recording

•The recording times shown are not exact because the DVB-T VCR/DVD Recorder uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded.

•When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter.

•Discs recorded at high speeds (equal to or greater than 2X) may not be recognized.

•If you record still pictures or audio only, the recording time may be longer.

•The displayed times for recording and time remaining may not always add up to the exact length of the disc.

•The available recording time may decrease if you heavily edit a disc.

•When using a DVD+R disc, you can keep recording until the disc is full, or until you finalise the disc. Before you start a recording session, check the amount of recording time left on the disc.

Recording TV Audio Channels

The DVB-T VCR/DVD Recorder can record channel audio. For analogue TV broadcasts, this usually means mono or stereo, but digital TV programs are broadcasted in multi-lingual audio channel. You can record multiple channel audio.

Restrictions on Video Recording

•You cannot record copy-protected video using this DVB-T VCR/DVD Recorder. Copy-protected video includes DVD-Video discs and some

satellite broadcasts. If copy-protected material is encountered during a recording, recording will pause or stop automatically and an error message will be displayed on-screen.

Copyright Notice

•Audio and video recordings you make using the DVB-T VCR/DVD Recorder are for your personal use only. You may not sell, lend, or rent them to other people.

•This product incorporates copyright protection technology that is protected by method claims of certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is prohibited.

9

INTRODUCTION

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 10

Overview Features

Precautions

Handling the Unit

When shipping the unit

The original shipping carton and packing materials will come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory.

When setting up the unit

The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.

To keep the surface clean

Do not use volatile liquids, such as insecticide spray, near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. They will leave marks on the surface.

Cleaning the Unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinners, as these might damage the surface of the unit.

To obtain a clear picture

The DVB-T VCR/DVD Recorder is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer.

Remote Control Operation Range

Point the remote control at the remote sensor and press the buttons.

Distance: Within 23 ft (7 m) of the remote sensor.

Angle: Within 30° in each direction of the remote sensor.

Remote Control Battery Installation

Caution

Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.).

Notes on Discs

Handling Discs

Do not touch the playback side of the

disc. Hold the disc by the edges so that

fingerprints will not get on the surface. Do not stick paper or tape on the disc.

Storing Discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature increase inside the car, which could distort the disc.

Cleaning Discs

Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the centre outward.

Do not use strong solvents such as alcohol, benzine, thinners, commercially available cleaners, or anti-

static spray
intended for
older vinyl
records.	Yes	No

Detach the battery cover on the rear of the remote control, and insert two AAA batteries. Make sure the polarities (+ and -) are aligned correctly.

10

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 11

Overview Features

What is DV?

Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVB-T VCR/DVD Recorder using a single DV cable for input and output of audio, video, data and control signals.

The i.LINK interface is also known as IEEE 13941995.

‘i.LINK’ and the ‘i.LINK’ logo are trademarks.

•The DVB-T VCR/DVD Recorder is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible.

•You cannot connect more than one DV camcorder at a time to the DVB-T VCR/DVD Recorder.

-Try switching off the HDMI/DVI device and this recorder. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this recorder.

-The connected device’s video input is set correctly for this unit.

-The connected device is compatible with 720x576i or 720x576p, 1280x720p or 1920x1080i (i:Interlaced scan mode, p:Progressive scan mode) video input.

Not all HDCP-compatible DVI devices will work with this recorder.

-It’s impossible to copy protected-DVD title’s playback in non-HDCP devices.

•It may not always be possible to control the connected camcorder via the DV IN jack.

•Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).

•Picture disturbance on the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or if the DV cable becomes disconnected.

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices. HDMI was developed to provide the technologies of HDCP (High Definition Contents Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC.

Additional Information for HDMI

When you connect a HDMI or DVI compatible device make sure of the followings:

What is USB (Universal Serial Bus)?

USB is an external bus standard that supports data transfer rates of 12 Mbps. A single USB port can be used to connect up to 127 peripheral devices, such as digital cameras, MP3 players, and removable storage. USB also supports Plug-and-Play installation and hot plugging.

-The USB port provides USB 2.0 Full Speed connectivity and also backword compatibility with USB 1.1 (USB 1.0) devices.

•If you happen to use a bad quality USB cable, the USB device might not be recognized.

•The compatibility with MP3 players and digital still cameras is somewhat restricted.

-This DVD Recorder + VCR can playback only mp3 format contents.

-This DVD Recorder + VCR does not support the audio contents encrypted by DRM (Digital Right Management).

•Either USB hub device or hub extension connectivity is not supported.

•There are lots of kinds of USB devices. Some of the USB devices mentioned above might not be compatible with this DVD Recorder + VCR. In other words, the USB host function of this product does not guarantee the compatibility with all of USB devices.

•This DVD Recorder + VCR supports both the high and full speed USB devices (Does not support Low speed devices).

11

INTRODUCTION

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 12

Identification of Controls

Front Panel

!

@

#

DRVT-40

$ ^ *

) 12 34 5 67

%& (

!

@

#

DRVT-43

$	^ *		2	5 67
		)	4 31
%	& (

!STANDBY/ON

Turns the DVB-T VCR/DVD Recorder on and off.

@Cassette Compartment (VCR deck)

Insert a video cassette here.

# Disc Tray (DVD deck)

Insert a disc here. $ VCR EJECT

Ejects the tape in the VCR deck.

% REC

)Front Panel Display

Shows the current status of the DVB-T VCR/DVD Recorder.

1COPY

Copies from DVD to VCR (or from VCR to DVD).

2CH+/–

Scans up or down through memorized channels. Also moves up and down in menus.

3 SELECT DVD/VCR

Starts recording. Press repeatedly to set the recording time.

^ STOP

Stops playback or recording.

&PLAY/PAUSE

Starts playback of a disc or tape. Pauses playback or recording temporarily.

*REW

DVD: Skips to previous chapter.

VCR: Rewinds the tape during Stop mode. Press during Play mode for fast reverse picture search.

(FF

DVD: Skips to next chapter.

VCR: Advances the tape during Stop mode. Press during Play mode for fast forward picture search.

12

Toggles control between the DVD mode and the VCR mode.

4OPEN/CLOSE (DVD)

Opens or closes the disc tray.

5AVF Input (VIDEO, L-AUDIO-R)

Connects to the audio/video output of an external source (VCR, Camcorder, etc.).

6DV Input

Connects to the DV output of an external source (VCR, Camcorder, etc.).

7USB Input

Connects to the USB device with Flash memory.

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 13

Front Panel Display

Identification of Controls

INTRODUCTION

Channel
001					TV Channel
Input mode
					AV1 input
AV-1
AV-2					AV2 input
					Front - AV input
F-AV
DV					DV input
Copy
					DVD to VCR copying
COPY
					VCR to DVD copying
COPY
Recording on disc
					Indicates a DVD Timer recording is
1 1 : 1 5
					set.
					Indicates a DVD Timer Recording is
1 1 : 1 5
					in standby mode.
					Indicates the DVD is recording.
R E C
0:30					OTR Recording mode
RECP					Recording Pause mode

Recording on tape

		Indicates a VCR Timer Recording is
	1 1 : 1 5
		set.
		Indicates a VCR Timer Recording is
	1 1 : 1 5
		in standby mode.
		Indicates the VCR is recording.
	R E C
	0:30	OTR Recording mode
	RECP	Recording Pause mode
	Others
		Indicates the DVB-T VCR/DVD
	VCR
		Recorder is in VCR mode (set by
		[TV/VCR] button).
		Indicates the DVB-T VCR/DVD
	TV
		Recorder is in TV mode (set by
		[TV/VCR] button).

13

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 14

Identification of Controls

Remote Control

Turns the DVB-T VCR/DVD Recorder on and off.

- Opens and closes the disc tray in DVD mode. - Ejects the tape in the VCR deck in VCR mode.

Selects VCR mode.

Selects DVD mode.

Switches between the DVB-T VCR/DVD Recorder tuner or your TV tuner.

- Selects numbered options in menus. - Selects TV channels.

- Manually adjusts tracking.

Displays information on the disc when you press this button once.

Displays DVD navigator when you press this button twice.

Displays a full list of searched channels or favourite list.

Accesses DVD disc menus.

Displays or exits the Setup menu.

Shows TV Guide (EPG : Electronic Programme Guide)

Returns to previous menu (mode)

- œ √…† : Selects menu options.

- CH +/– : Selects channels. - VOL +/– : Adjusts volume.

Confirms menu selections.

Displays information on the current and next programmes on the channel

RED/GREEN/YELLOW/BLUE (Colour Buttons)

: used for selecting interactive applications (Additional Option Selection)

- Starts playback.

- Pauses playback or recording temporarily. Press again to exit Pause mode.

-DVD: Searches backward/forward.

-VCR: Rewinds/advances during Stop mode. Press during Play mode for fast reverse/forward picture search.

Stops playback or recording.

Skips to the next or previous chapter/track.

Starts recording. Press repeatedly to set the recording time. For more details, Refer to One Touch Record (OTR) on page 46.

Increases or decreases the slow motion speed when playing a DVD or VHS tape.

14

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 15

Selects Recording mode:

- DVD : Approx 1 Hour (HQ mode), 2 Hours (SP mode), 4 Hours (EP mode), 8 Hours (SEP mode)

- VCR : SP or LP.

Selects an audio language (DVD), audio channel (CD) or audio type (TV).

Selects a subtitle language, if available.

Repeats the current chapter, track, title or the entire disc.

Repeats playback between two points (A and B).

Displays a disc’s Title menu, if available.

Enlarges the DVD video image.

Selects a DVD camera angle, if available.

Resets the tape counter in VCR mode.

Displays the Timer Recording menu.

Displays digital text of the programme

Disc Operation options

Switches the DVB-T VCR/DVD Recorder input to TV tuner, AV1, AV2, FAV or DV.

Progressive Scan Mode

•As component outputs have their own Jacks on the back side, change the TV input into Component input, after connecting the component cables from the DVB-T VCR/DVD Recorder to TV.

•Changing from Interlace or Progressive to RGB, should be the opposite of above.

INTRODUCTION

CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN THE CASE OF 576 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY 'WITH THIS MODEL, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE.

15

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 16

Identification of Controls

Rear panel

!	@	#	$	%
)	(	*	&	^

!AC Power Cord

Plug into a power outlet.

@ AUDIO OUT (L, R)

Connect to a TV or other equipment with audio inputs.

#COMPONENT VIDEO OUT (Y Pb Pr)

Connect to a TV with Component Video (Y Pb Pr) inputs.

$Scart socket 2

Connection of an additional device (satellite receiver, set-top box, video recorder, camcorder, etc.)

%RF OUT (TO TV)

Connect to a TV with an RF input.

^RF IN (FROM ANT.)

Connect to your antenna or cable TV outlet.

&Scart socket 1

Connection of a TV set. Composite-output and RGB-output

* S-VIDEO OUT

Connect to a TV with an S-Video Input.

(COAXIAL (Digital Audio Out)

Connect to an amplifier with a coaxial digital audio input.

)HDMI OUT

HDMI output providing a high quality interface for digital audio and video.

Caution

•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the DVB-T VCR/DVD Recorder.

16

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 17

Connectionsti

To enable you to set up your new DVB-T VCR/DVD recorder, it must be connected it to your TV using either a SCART cable or a COMPONENT (or S-Video) and associated AUDIO cable. If a unit has HDMI connection, you can use a HDMI cable as well.

•There are a variety of ways to connect the DVB-T VCR/DVD Recorder to your TV and other equipment. Use only one of the connections described below. Whichever TV connection you use will work with all input sources.

•Please refer to the manuals for your TV, VCR, stereo system, or other devices as necessary to make the best connections.

•For better sound reproduction, connect the DVB-T VCR/DVD Recorder’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo, or audio/video equipment. See ‘Connecting an Amplifier/Receiver‘ on page

Caution

Connecting a TV

Choose one of the following TV connections, depending on the capabilities of your equipment.

Rear of TV

ANTENNA

INPUT

Pr

Pb

Y

• Make sure the DVB-T VCR/DVD Recorder connected directly to the TV, and the TV to the correct video input.

• Do not connect the DVB-T VCR/DVD

AUDIO OUT jack to the phone in jack (record Rear of DVB-T VCR/DVD Recorder deck) of your audio system.

	• Do not connect the unit through a VCR. Video	RF Connection
	signals fed through VCRs may be affected by
	copyright protection systems and the picture	Connect the ANT OUT (TO TV) jack on the DVB-T
	will be distorted on the television.
		VCR/DVD Recorder to the antenna in jack on your
	Connecting Antenna/Cable	TV using the supplied 75-ohm RF cable (R).
		This set doesn’t have a modulator output. However
	1 Disconnect the antenna/cable from the rear of	it still supplies the RF loopthrough Output.
	your TV.	Scart Connection
	2 Connect this cable to the jack marked ANT IN	1 Plug a scart cable into the scart socket TV
	(FROM ANT.) on the rear panel of the DVB-T
		(EURO AV1) at the back of the DVB-T VCR/DVD
	VCR/DVD Recorder.
		Recorder and the corresponding scart socket at
	Antenna Antenna	the back of the TV set. (V)

			Cable TV	2 Plug a scart cable into the top scart socket
			Wall Jack
Flat Wire				VCR/DVD (EURO AV2/DECODER) at the back of
(300ohm)				the DVB-T VCR/DVD Recorder and the
300/75ohm Adapter				corresponding scart socket at the back of the
(Not supplied)	OR	OR		Decoder.

CONNECTIONS INTRODUCTION

Rear of DVB-T VCR/DVD Recorder

17

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 18

Connections

S-Video Connection

1Connect the S-VIDEO OUT jack on the DVB-T VCR/DVD Recorder to the S-Video in jack on your TV using an S-Video cable (S).

2Connect the Left and Right AUDIO OUT jacks from the DVB-T VCR/DVD Recorder to the left/right audio in jacks on your TV using the audio cables.

Component Video Connection

•If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVB-T VCR/DVD Recorder’s Progressive Scan output for the highest video resolution possible.

•If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

1Connect the COMPONENT VIDEO OUT jacks on the DVB-T VCR/DVD Recorder to the corresponding jacks on your TV using a Y Pb Pr cable (C) if the component (Y, Pb, Pr) is available on your TV.

2Connect the Left and Right AUDIO OUT jacks of the DVB-T VCR/DVD Recorder to the left/right audio jacks on your TV using the audio cables.

• When you use component video connection, you can change the resolution (576i, 576p) for the component output by setting the video output option in the setup menu (See page 31).

•When you use the HDMI connection, the audio’s sampling frequency is outputted only with 48KHz even if you select [96KHz].

•This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround sound, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

•No sound will be output from the HDMI cable if the Digital out option is not set to ‘PCM’ on the Setup menu (See page 31).

•The arrow on the cable connector body should face up for correct alignment with the connector on the recorder.

•If there is noise or lines on the screen, please check the HDMI cable.

•When you use HDMI connection, you can change the resolution (576i, 576p, 720p, 1080i) for the HDMI output by setting the video output option in the setup menu (See page 31).

-RGB : 576i

-Interlaced mode : 576i, 1080i

-Progressive mode : 576p, 720p

•Changing the Progressive Scan mode when the recorder is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the recorder and then turn it on again.

-Interlaced mode : 576i

-Progressive mode : 576p

•Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

HDMI connection

If you have a HDMI TV or monitor, you can connect it to this recorder using a HDMI cable.

1Connect the HDMI jack on the recorder to the HDMI jack on a HDMI compatible TV or monitor

(H).

2Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

18

DTBC-MNF(or D)1NP-AG 2007.9.20 2:57 PM ˘ ` 19

Connections

Connecting an Amplifier/Receiver

Connecting to an amplifier equipped with two channel analogue stereo or Dolby Pro Logic ll/Pro Logic

Connect the Left and Right AUDIO OUT jacks on the DVB-T VCR/DVD Recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the audio cables (A) (Audio cables are not supplied with this product).

The DVB-T VCR/DVD Recorder does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi-channel surround, you must connect the DVB-T VCR/DVD Recorder to a DTS compatible receiver via one of the DVB-T VCR/DVD Recorder’s digital audio outputs.

Connecting to an amplifier equipped with two	Rear of DVB-T VCR/DVD Recorder
channel digital stereo (PCM) or to an Audio/Video
receiver equipped with a multi-channel decoder
(Dolby Digital™, MPEG 2, or DTS)

1 Connect the DVB-T VCR/DVD Recorder DIGITAL AUDIO OUT jack (Coaxial) to corresponding in jack on your amplifier optional digital coaxial audio cable. (X)

2 You need to activate the DVB-T VCR/DVD Recorder’s digital output; see ‘Digital Audio’ Settings on page 31.

Digital Multi-Channel Sound

A digital multi-channel connection provides the best		Amplifier (Receiver)
sound quality. For this you need a multi-channel
audio/video receiver that supports one or more of		Connecting Optional Equipment
the audio formats provided by your DVB-T VCR/DVD
Recorder (MPEG 2, Dolby Digital, and DTS). Check
the receiver manual and the logos on the front of		To receive audio/video signals from other
the receiver.
		equipment, connect the AVF (Audio/Video Front)
		jacks on the DVB-T VCR/DVD Recorder to the
		audio/video out jacks on your external component,
• Due to the DTS Licensing agreement, the		using optional audio/video cables.
digital output will be in DTS digital out when		Jack Panel of Accessory Component
the DTS audio stream is selected.
		(VCR, Analogue Camcorder, etc.)

• If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

•5.1 channel digital surround sound via the digital connection can only be obtained if your

receiver is equipped with a digital multichannel decoder.

• To see the audio format of the current DVD on the on-screen display, press [AUDIO].

Front of DVB-T VCR/DVD Recorder

19

CONNECTIONS