Dacor DYF30BFBPL, DYF30BFBPR, DYF30BFBSL, DYF30BFBSR, DYF30BFTSL Installation Guide
...
MODELS: DYF30BFBPL, DYF30BFBPR, DYF30BFBSL, DYF30BFBSR, DYF30BFTSL, DYF30BFTSR, DYF36BFBPL, DYF36BFBPR, DYF36BFBSL, DYF36BFBSR, DYF36BFTSL, DYF36BFTSR
Epicure® and Pro Style Refrigerator
Handle Kits, PN ADYFxxH2y*
INSTALLATION |
INSTRUCTIONS |
* xx = refrigerator width (30” or 36”), y = handle style E for Epicure P for Pro
Tools and Materials Required
The following items are not provided with the kit and are required for proper installation.
•3/32” hex wrench
•Electric drill with 3/32” drill bit
CAUTION: To avoid damage to the refrigerator or handle components, use power tools only for drilling pilot holes in the custom panel . Use hand tools only for handle disassembly and assembly.
Parts Included
|
OR |
|
Handle Mounting |
Epicure style |
Pro style |
#10 Wood Screws** (4) |
|
|
Studs** (4) |
|
|
Handles, 1 Long, 1 Short |
|
|
|
|
** Required for model DYF30BFBPL, DYF30BFBPR DYF36BFBPL and DYF36BFBPR refrigerators only
Installation notes for custom panel models
Models DYF30BFBPL, DYF30BFBPR DYF36BFBPL and DYF36BFBPR
Before installing the custom panels, you need to install the handle studs included with this kit using the included #10 screws. See the refrigerator installation instructions for complete custom panel construction information. The screws included with the kit are designed to accommodate the panels thicknesses specified in the refrigerator installation instructions ( 3/4” to 1 1/8”). See diagram.
Handle
Wood |
Mounting |
screw |
stud |
|
Custom |
|
panel |
Appliance |
|
door/drawer |
|
Stud Mounting, Custom Panel Style
Refrigerators - Top View
Part No. 108873 Rev. B
Refrigerator Handle Kit Installation Instructions
Steps 1 through 4 apply to models DYF30BFBPL, DYF30BFBPR, DYF36BFBPL and DYF36BFBPR, only.
STEP 1 Custom panel models: Construct the custom panels according to the specifications in the refrigerator installation instructions.
STEP 2 Custom panel models: Drill four (4) pilot holes (2 for the refrigerator door and 2 for the freezer drawer) using a 3/32” drill bit. The required spacing for proper fit are shown below.
35 7/16” |
|
|
35 7/16” |
|
|||||
(89.9 cm) |
|
|
(89.9 cm) |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Custom
panels
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
Handle Mounting Stud Locations |
Handle Mounting Stud Locations |
|||||||||||||||||||
Custom Panel Models with Hinges on Right |
Custom Panel Models with Hinges on Left |
|||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||
|
|
|
|
|
|
|
|
Kit |
|
A |
|
|
||||||||
|
|
|
|
|
|
ADYF30H2F/P |
|
23 1/2” |
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
(59.8 cm) |
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
ADYF36H2F/P |
|
29 1/2” |
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
(74.8 cm) |
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
Page 2
Loading...