Creda 85315, 85313, 85312, 85303, 85301 User Manual

...
0 (0)
Creda 85315, 85313, 85312, 85303, 85301 User Manual

NEW

 

 

 

 

Thermostatic Panel

 

Radiator

 

from Creda

 

Owners Guide

a heating revolutionera

 

 

 

 

 

 

 

ModelNumbers:

 

 

 

85301,85302,85303,85304,85305

 

 

 

85311,85312,85313,85314,85315

 

IMPORTANT INSTRUCTIONS

Retain these instructions for future reference, read them carefully and note also the information given on the heater.

Dimensions (millimetres)

 

 

 

 

 

 

150

150

 

 

 

 

 

min

 

 

 

 

 

min

rnin

Model

Watt

A

B

 

 

 

85301

/ 85311

750

444

93

 

420

85302

/ 85312

1000

614

93

 

85303

/ 85313

1250

614

93

 

 

 

 

85304

/ 85314

1500

682

93

 

 

85305

/ 85315

2000

852

93

 

150

 

 

 

 

 

150 min

The TPR Heater is designed for wall mounting on the wall brackets supplied. It should only be operated when in the upright position as shown.

All models are splashproof to IP24 standard.

Models 8530.. are fitted with a 24 hour programmable timer.

Before connecting the heater check that the supply voltage is the same as that stated on the heater,

INSTALLATION:

The electrical installation must be carried out by a competent electrician and be in strict accordance with the current National Wiring Regulations (BS7671).

The heater is fitted with a length of flexible cable type H05V V-F, size 3 x 1.0mm2 for connection to the fixed wiring of the premises through a suitable connection box positioned adjacent to the heater.

The supply circuit to the heater must incorporate a means for disconnection in all poles in the fixed wiring in accordance with the wiring rules.

WARNING -THIS APPLIANCE MUST BE EARTHED

BATHROOM INSTALLATION:

IMPORTANT - If the heater is installed in a room containing a bath or shower, it must be so installed that switches and other controls cannot be touched by a person using a bath or shower.

WALL MOUNTING:

IMPORTANT - The wall brackets supplied with the appliance must be used. The heater should be positioned observing the minimum clearances stated around the heater.

DO NOT locate the heater immediately below a fixed socket outlet or connection box.

200

Min.

1.Remove wall mounting bracket from back of heater by depressing spring latch at top of each bracket.

2.Fix wall bracket securely to wall through the four screw holes provided.

3.Present heater to wall bracket, and engage lower slots in back with bracket,

4.Raise heater to upright position and push heater onto brackets to engage top latch.

Loading...
+ 1 hidden pages