Coyote CRC Instructions

CRC INSTALL GUIDE

DIMENSIONAL RENDERINGS

/4"

3

22

/Ă"

1

2ą

29"

/4"

3

10"

10

2ā Ĉ/ĉ"

2Ă Ĉ/ĉ"

30 1/4"

29 1/4"

3

/4

"

SIDE

BURNER

OPENING

COUNTERTOP

OVERHANG

22 3/4"

TOP VIEW

1/4"

29

CUTOUT WIDTH

Overall Product Dimensions

Model No. Height Width Depth

CRC

Install Notes:

 The CRC contains a drop-in-cooler that is located in the bottom middle of the cooler, that has a 5/8" ID and a 3/4" OD that you can connect a drain hose to.

• If your cabinet/island contains a french drain (or other feature for allowing water to escape), then you can also allow the CDIC to drain into (or
through) your island. Depending on your building material, this may or may not be an option.

• A drain plug is also included with the cabinet to keep any ice or water from leaking when in use

• When the CRC is located in an area with humidity and ice is placed inside, the cooler can "sweat" on the exterior of the box. Be aware that even with

the drain in, this sweat could drop into your cabinet.

 CRC also contains a sink that comes with a standard drain, p-trap and single supply faucet

10 3/4"

30 1/4

"

29"

INCLUDING

COUNTERTOP

10"

OPENING

HEIGHT

Model No. Height Width Depth

29 1/4"

CUTOUT WIDTH

DOORS / DRAWERS

OPENING WIDTH

FRONT VIEW

Cutout Dimensions for Island

CRC

10"

29 1/4"

1 1/2" MIN

OPENING

HEIGHT

22 3/4"

Important Note to Installer: This file is not intended to replace your Owners' Manual which contains specific safety requirements

and consumer guidelines. Please refer to your Owners' Manual prior to installing or operating your built-in side burner.

www.coyoteoutdoor.com