Flavor Fusion 255 Drip Tray to ‘Z’ Style Unit Conversion Installation Instructions
INSTALLATION INSTRUCTIONS
FLAVOR FUSION 255 WITH DRIP TRAY TO ‘Z’ STYLE UNIT CONVERSION
#8-18 X 1/2" LONG SCREW
P/N 620705801
2 PLACES
DETAIL A
SCALE 0.375
ADJUSTABLE FORMING BRACKET (HELPS TO KEEP SPLASH PANEL SIDES FLUSH WITH SIDE PANELS, MOUNT BRACKETS INSIDE OF SPLASH PANEL)
P/N 620053264
2 PLACES
SEE DETAIL A
'Z' STYLE SPLASH PANEL P/N 620053350 (SILVER) P/N 620053351 (BLACK)
#8-32 MOUNTING SCREWS
2 PLACES
P/N 70178
1" BARB SPLICER
P/N 53293
(PLUMB TO EXISTING DRAIN LINE) DRAIN TUBE P/N 53169
HOSE CLAMP
1 PLACES
P/N 70750
IMPORTANT!!!
BE SURE TO INSULATE ALL FITTINGS/HOSE WITH INSULATION TUBE
AND TAPE SUPPLIED IN KIT. FAILURE TO DO SO WILL LEAD TO CONDENSATION PROBLEMS
EXISTING COLDPLATE
DRAIN BOOTS
2 PLACES
HOSE CLAMP
4 PLACES
P/N 71086
3/4" BARBED ELBOW
2 PLACES
P/N 51280
THIS EQUIPMENT MUST BE INSTALLED WITH ADEQUATE BACKFLOW PROTECTION
TO COMPLY WITH APPLICABLE FEDERAL, STATE AND LOCAL CODES.
Release Date: July 7, 2006 |
www.cornelius.com |
Revision: B |
© 2006, IMI Cornelius Inc. |
- 1 - |
Publication Number: 629088779INS |
Loading...