WALL |
NEO-RAY™ |
|
8 0 3
8 0 2
SCALA
803-IW
802-IW
D I R E C T- I N D I R E C T
•803 IW Regressed canopy creates illusion of an illuminated floating rail (pictured above)
•Single T5 lamping utilizes wall surface for indirect lighting component
•Customizable diffuser material available including architectural patterned glass
•Fixture may be used without diffusion material for refined minimalist appearance
•Slim 1-1/2” Height x 7-1/8” Extension
•Die-cast aluminum end caps
•Modular construction allows easy creation of rows with included joiners
•Precision formed steel fixture body available in Polished and Satin Chrome finishes
•Companion Scala pendant available
730 COOPER LIGHTING
S |
1-1/2" [38mm] |
7”
[179mm]
803 |
See mounting notes |
S |
1-1/2" [38mm] |
7-3/4” [196mm]
802 3/8" [10mm]
Construction
Housing is die formed cold rolled steel forming an 1-1/2” x 7-3/4” architectural profile. Standard 4’-0” and 8’-0” fixture lengths combine for individual or continuous runs.
End Caps
End caps are precision die-cast aluminum mechanically attached without exposed fasteners.
Reflectors
Optical reflectors are die-formed high reflectance white painted steel.
Electrical
Fixtures use UL listed Class P, T5 program rapid start electronic ballasts. Power factor of 97% with less than 10% THD. Fixtures and electrical components certified to UL and CUL standards.
ORDERING INFORMATION:
Sample number: 802IW-1T5-48-1EB-SI-S28A
Series |
|
802=Scala |
803=Scala |
Light Output |
|
I=Indirect |
|
Mounting |
|
W=Wall |
|
Number of Lamps (not included)
1=1 Lamp
Lamp Type
T5 T5HO
Run Length
Overall Nominal Run Length__ft. (Any combination of 8’, 6’, 4’ and 3’ sections)
Voltage 1 |
|
|
|
1=120V |
2=277V |
3=347V |
U=Universal |
Ballast |
|
|
|
EB=Electronic Ballast (Standard) |
DB=Dimming Ballast |
||
[Only slim line ballast (small case)] |
|
||
Switching |
|
|
|
SI=Single Switching |
DU=Dual Switching |
Emergency
EM=Emergency Pack (Consult Factory)
Diffuser Type |
|
28A=Ribbed Clear Plastic |
28C=Ribbed Blue Plastic |
28B=Ribbed Texture Plastic |
28D=Ribbed Green Plastic |
Special Finish Options
CB=Chrome housing with black gloss ends
SB=Satin housing with black gloss ends
1 Due to various constraints, some options may not be combined with others.
Diffusing Media
Standard ribbed semi-transparent/translucent diffusing lens are available. Custom diffusers can be specified (consult factory.
Finish
Baked on low-gloss white powder coated acrylic finish.
Mounting
Fixture mounts directly to existing structure over a 2” x 4” standard electrical box mounted horizontally in the wall.
803 Mounting Notes
803 mounts to blocking (by others) behind sheet rock that is then plastered over for refined aesthetic.
Flexible conduit (by others) feeds directly into fixture arm with home run (elec.) to each row.
S = Slim Line Ballast only.
S T A N D A R D L U M I N A I R E L E N G T H S * |
SPECIAL ORDER |
48"[1219mm]* |
36" |
96"[2438mm]* |
72" |
*Dimensions do not include end caps.
NOTES: For complete product data, refer to the Neo-Ray Specification Binder. Specifications and dimensions subject to change without notice. Products may be modified for use in international markets. Please contact your Cooper Lighting Sales Representative for availability and ordering information.