WALL BRACKETS
428
COOPER LIGHTING - METALUX®
BI/BIU SERIES
2 ' , 3 ' o r 4 '
1 o r 2 L a m p s
S T E E L WA L L B R A C K E T
•Equipped with energy saving ballasts/complies with federal energy efficiency standards
•Low profile design
•Die formed, steel housing
•Baked white enamel finish
•Down or combination up/downlight
•Injection molded diffuser/end plate
•Refractor slides forward for easy installation and maintenance
•Easy wiring access
•Convenience outlet and switching available, see Options page
•UL/CUL Listed. Suitable for damp locations.
D E S C R I P T I O N
The BI Series meets the need for a very low brightness wall bracket. This specification grade wall bracket with an injection molded refractor produces effective up, down or combination lighting. This energy efficient luminaire offers up lighting, multi-level switching and convenience outlets as options. These design features ensure that the BI Series will provide ease of use and comfort. The BI Series features specification efficiency in a low profile wall bracket. The Series is an excellent choice for dressing rooms, lavatories, hospital and nursing homes, stairways and task lighting.
O R D E R I N G I N F O R M AT I O N
D I M E N S I O N S
NOMINAL LENGTH |
A |
B |
2', 3' ,4' |
7-1/2" (190mm) |
3-1/2" (89mm) |
S A M P L E N U M B E R : B I - 2 3 2 - 1 2 0 V - E B 8 1 - U
BI=Series
Light Distribution
Blank=Downlight
Only
U=Up and
Downlight
Number of Lamps
1 or 2 lamps
(Not Included)
Wattage (Length) 20=20W T12 (24") 17=17W T8 (24")
30=30W T12 (36")
25=25W T8 (36")
40=40W T12 (48")
32=32W T8 (48")
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal
Voltage 120-277 (2)
Options
GL=Single Element Fuse
GM=Double Element Fuse Emergency - for EM installed, see EM options table(3)
Starting Type
LTS=Low Trigger Start (20 Watt only) (120V only) HTS=High Trigger Start (20 Watt only)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Options |
|
Packaging |
|||
|
|
|
|
(See Options |
|
U=Unit Pack |
|||
|
|
|
|||||||
|
Ballast Type (1) |
|
Section) |
|
|
|
|
Blank=Standard Magnetic Ballast (20W only)
LE3=T12 Magnetic Energy Saving EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
No. of Ballast 1, 2 or 3
EB8 /PLUS= T8 Electronic Instant Start.
|
|
|
High Ballast Factor >1.13. Total |
|
No. of |
Harmonic Distortion < 20% |
|||
Ballast |
||||
|
||||
1, 2 or 3 |
|
ER8 = T8 Electronic Program Rapid Start. Total Harmonic Distortion < 10%
No. of Ballast 1, 2 or 3
EB2 =T12 Electronic Rapid Start.
No. of Ballast 1 or 2
(For complete details on generic or to specify manufacturer’s ballast see pg. 469)
|
NOTES: (1)Products also available in non-US voltages and frequencies for international markets. (2)Not available when specifying emergencies, voltage must be specific. |
|
(3)Non available for 2' version. |
COOPER LIGHTING |
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting |
Representative for availability and ordering information. |