ACCESSORIES: JUNCTION BOXES
LUMIERE` ®
D E S C R I P T I O N
Lumière offers junction boxes to meet virtually any landscape lighting application.
DBY |
DESCRIPTION |
2" x 2-5/8" (51mm x 67mm) |
Direct burial, watertight wiring kit. For |
Use with low voltage fixtures only |
through wiring of low voltage cable. |
|
Constructed from injection-molded |
|
plastic. |
MB1-xx* |
DESCRIPTION |
|
4-7/8" x 2" (124mm x 51mm) |
Rectangular, above ground junction box |
|
for surface or recessed mounting. It |
||
Use with line voltage or low voltage fixtures |
||
|
accepts Lumière's FS1 or FS2 fixture |
|
|
mounting covers (not included). |
|
|
Constructed from die-cast aluminum. |
|
|
Specify finish (BK, BZ, CS, VE, WT). |
MB2-xx* |
DESCRIPTION |
6-1/2" x 2-7/8" (165mm x 73mm) |
Round, below grade junction box and |
Use with line voltage or low voltage fixtures |
cover for inground installation. |
|
Constructed from cast iron. |
|
Specify finish (BK, BZ, CS, VE, WT). |
MBR1-xx* |
DESCRIPTION |
4-1/8" x 1-5/8" (105mm x 41mm)
Use with line voltage or low voltage fixtures
*Replace xx with corresponding finish.
O R D E R I N G I N F O R M AT I O N
Round, above ground junction box for surface or recessed mounting. It accepts Lumière's RS1 or RS2 fixture mounting covers (not included). Constructed from die-cast aluminum.
Specify finish (BK, BZ, CS, VE, WT).
SAMPLE NUMBER: MB1-BK
Order junction boxes as separate line items. Specify quantities and (if applicable) finish.
1082 COOPER LIGHTING