Cooper Lighting L994, L946, L947, L949, L951 User Manual

L 9 4 2 F l e x J o i n e r

To connect two track sections at any angle up to 90,° in either plane or wall to ceiling or pitched ceiling applications.

Finish: White (P), Black (MB)

L 9 4 5 R R i g h t T C o n n e c t o r

“T” connector for joining three trac sections with right hand polarity. May be used as feed point.

Finish: White (P), Black (MB)

L 9 4 6 X C o n n e c t o r

To connect four track section into a cross configuration. May be used for feed point.

Finish: White (P), Black (MB)

L 9 4 9 M i n i J o i n e r

To join two straight track sections end-to-end. Not a feed point.

Finish: White (P), Black (MB)

L 9 8 3 T- B a r A t t a c h m e n t C l i p

Allows track to be attached to inverted tee ceiling. Order as follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for 12’ Trac.

L 9 8 6 T- B a r A t t a c h m e n t C l i p

For mounting track on suspended ceilings with mini-grid (9/16" wide) system.

L 9 2 9 F l o a t i n g C a n o p y a n d C o n n e c t o r

Can be connected anywhere along length of Trac. Comes with canopy cover, connector, dead-end and mounting hardware.

Finish: White (P), Black (MB)

L 9 9 4 4 5 ° P e n d a n t A d a p t e r

For installing pendant mounted Power-Trac on sloped ceiling. For use with L992 and L993.

Finish: White (P), Black (MB)

HALO®

L 9 4 3 S t r a i g h t / L C o n n e c t o r

To connect two track sections end-to-end or at a 90° angle. May be used as feed point.

Finish: White (P), Black (MB)

L 9 4 5 L L e f t T C o n n e c t o r

“T” connector for joining three trac sections with left hand polarity. May be used as feed point.

Finish: White (P), Black (MB)

L 9 4 7 C o n d u i t C o n n e c t o r

A live end connector for use with surface conduit. Designed to accept standard 1/2” conduit fitting (not included). May be used for feed point.

Finish: White (P), Black (MB)

L 9 5 1 W i r e W a y C o v e r f o r

P e n d a n t A s s e m b l y K i t

For track to be wired through stem (one for each live end used). Shown with end feed and pendant stem kit– order separately

Finish: White (P), Black (MB)

L 9 8 9 C o n d u i t C o n t i n u a t i o n K i t

Includes one left and one right feed. To continue

a run around obstructions with 1/2” trade size surface conduit.

Finish: White (P), Black (MB)

L 9 9 2 P e n d a n t K i t A s s e m b l y

To suspend track from ceiling. Order as follows: 2 kits for 2’ Trac; 2 kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for 12’ Trac. Includes one 18” threaded steel stem, canopy and mounting hardware.

Finish: White (P), Black (MB)

L 4 8 4 8 ” S t e e l S t e m

For additional length of stem for L992. Can be field cut and threaded.

D E 6 4 1 D e a d E n d

Replacement Dead Ends for Two Circuit Track (6 included)

Finish: White (P), Black (MB)

Circuit Two LIGHTING TRACK

COOPER LIGHTING 313