L252, L352 Media Holders
Allows use of L400 series color filters and Cube cell louvers with L1830 (L252) and L1838 (L352)
Media Holder |
L252MB |
L352MB |
Med. Pink filter |
L411 |
L211 |
Warm Red filter |
L412 |
L212 |
Daylight Blue filter |
L420 |
L220 |
Medium Blue filter |
L421 |
L221 |
Medium Amber filter |
L431 |
L231 |
Medium Green filter |
L441 |
L241 |
UV filter |
L414 |
L214 |
Cube Cell |
L274 |
L275 |
Finish: Black (MB) |
|
|
L 1 9 7 3 L o w Vo l t a g e
C a n o p y A d a p t e r
Allows use of L2001 and L2004 Solid State Adapter or lampholders with integral solid state transformer in canopy mount installations. Also for use with L3218, L3232, L3239, L5300, L5130 & L5138. Mounts permanently to junction box.
5 3/8” sq.
Finish: White (P), Black (MB)
L 1 9 7 4 We i g h t e d B a s e A d a p t e r
For portable use. May also be used with L2001 and L2004 Adapter and low voltage lampholders. Padded base 5 3/8” sq. Complete with 6’ 3-wire cord with 3-prong grounded plug. Rotary on-off switch.
Finish: White (P), Black (MB)
L 9 7 2 C C l a m p A d a p t e r
Can be mounted on pipe up to 2” dia. or any flat protruding surface. Complete with 6’ 3-wire cord with 3-prong grounded plug.
Finish: White (P), Black (MB)
L 9 7 3 C a n o p y A d a p t e r
Mounts permanently to outlet box. 4 1/2” sq. Not for use with electronic low voltage lampholders, HID lampholders or ParaTrack
lampholders except for the following:
L2005, L5038, L5300, L3240E, L3250E, L3255E
Finish: White (P), Black (MB)
L 9 1 7 S l o p e A d a p t e r s
Allows use of extension wands on sloped or cathedral ceilings. 0°-90°.
Max Extension: 4 3/4” (121mm)
Finish: White (P), Black (MB)
L 9 1 8 , L 9 3 6 , L 9 4 8 E x t e n s i o n Wa n d s
For use with most lampholders (excluding those with integral electronic transformers, HID lampholders except L5300 or some Para Trac [L3218, L3232, L3239] lampholders) and trac. May also be used with L2001 Solid State Adapter, L967 or L968 Switches or, with L963, in 4 Circuit Trac.
NOT FOR USE WITH LAZER TRACK LAMPHOLDERS
L918-18” length; L936-36” length;
L948-48” length.
Finish: White (P), Black (MB)
L 9 5 6 S h o w r o o m F i x t u r e A d a p t e r
Note: Single Circuit only
Allows canopy mounted fixture (chandelier, etc.) to be suspended from track. Will hold up to 35 lbs. Can be switched on and off via track or by pull chain on adapter.
Finish: White (P)
4 7 7 Tr a c A d a p t e r Tr i m
For use with Halo H7, H7R and H44 recessed housings. Allows Trac lampholders to be used with recessed installations. Not for use with any solid state/electronic low voltage, HID lampholders or fluorescent lampholders. Up to 150W maximum.
Finish: Black Baffle with White Trim Ring (P), White Baffle with White Trim Ring (W)
HALO®
Accessories LIGHTING TRACK
COOPER LIGHTING 325