Cooper Lighting COMBOLIGHT T4 User Manual

0 (0)
Cooper Lighting COMBOLIGHT T4 User Manual

DESCRIPTION

An adjustable Single-lamp Recessed fixture for trimless installation suitable for downlighting and accent applications. Utilizes ONE (1) T4 GU6.5 Metal Halide

(GE® Constant Color Super Mini) lamp.

For new construction applications. Insulation must be kept 3” from all sides and at least 1” above the housing.

SPECIFICATION FEATURES

Catalog #

Type

Project

 

Comments

Date

Prepared by

 

A.... Housing

Housing, junction box & trimless meshplate assembly are all steel construction. Perforated meshplate allows for trimless installation in drywall/plaster ceilings by allowing the ceiling’s mudding compound to be applied right up to the edge of the fixture opening. Includes

a beveled “knife-edge” lips to ensure a clean edge. Can accommodate 0.50” to 1.25” ceiling thickness. Optional Chicago Plenum configuration available.

B.... System Protection:

Thermal protection provided to guard against overheating and misuse of insulation over and around fixture. Vent holes in housing provide cooler operation.

C... Junction Box

Junction Box is UL listed for through

branch wiring, 6 #12 90º C supply conductors or 60º C for end of run. The fixture is also UL listed as ‘access above ceiling not required’.

D... Electrical

Electrical accessible through ceiling opening. J-Box located on the side wall of the housing behind removable access doors. Integral electronic metal halide ballasts on individually removable “trays” for easy maintenance. May also be configured for remote power.

E.... Lamps

One (1) T4 GU6.5 Metal Halide lamp with reflector mounted in adjustable double gimbal. Lamp holder is individually removable and may be regressed 1” for additional cut-off. Lamp can accept up to three optical accessories (i.e. lens + hex louver +

snoot). 45º x 45º locking lamp adjustment. Beveled-edge lamp ring is secured with threadless, bayonet action. Optional retractable arm is available for lamp pulldown and extreme aiming. Includes GU6.5 TAL socket.

F.... Mounting

Butterfly Brackets accept 1/2” EMT, C Channel, Tbar fasteners, and bar hangers. Four tabs on housing for securing to structure. Perforated flaps

along housing sides for securing trimless insert to fixture and drywall.

G... Labels

cULus listed for non-type IC applications, suitable for use in damp locations.

Ceiling Cut-Out: 5.44” x 5.44”

COMBOLIGHT®

Next Generation

Recessed

Single-Lamp Fixture

One (1) Light

T4 GU6.5 Metal Halide

New Construction

Housing

Trimless

15.01”

 

 

 

 

 

 

 

16.14”

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.45”

10.96”

Double

12.01”

4.65”

Gimbal

 

45º x 45º

 

 

Adjust

4.65”

 

 

 

 

Perforated

 

Meshplate

T4 GU6.5 Lamp with Reflectors

 

 

This fixture utilizes the GE® SuperMini Constant Color

Integral Electronic

 

Lamp and includes high-performance clear aluminum reflec-

 

Metal Halide Ballast

 

tors in narrow, medium, or wide distributions. Non-standard

Thermal

color reflectors are available upon request.

 

 

Protector

 

 

ORDERING INFORMATION

 

 

 

C1

 

 

 

 

 

E

 

 

 

 

N

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Configuration

 

Lamp Type / Wattage Label / Reflector Type

 

 

Power Supply

 

 

 

Lamp Mechanism

 

 

 

Trim Finish

 

C1 = COMBOLIGHT Recessed

 

020MCN = 20 Watt T4 GU6.5 SuperMini Narrow

 

 

Voltage

 

 

 

G = Double Gimbal

 

 

 

W = White

 

One (1) Light

 

020MCM = 20 Watt T4 GU6.5 SuperMini Medium

 

 

1

= 120V

 

 

 

R = Retractable Double Gimbal

 

 

B = Black

 

 

 

 

 

 

 

 

 

 

 

 

 

020MCW = 20 Watt T4 GU6.5 SuperMini Wide

 

2

= 277V

 

 

 

 

 

 

 

 

S = Industrial Silver

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Housing

 

Power Supply

 

Trim Insert

Housing Interior/Electrical Door

 

 

 

N =

New Construction

 

E = Electronic Metal Halide

 

N = Trimless

/Sleeve Finish

 

 

 

C =

Chicago Plenum

 

 

Ballast

 

 

 

 

 

 

 

W =

White

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

B = Black

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

S = Industrial Silver

Specifications and Dimensions subject to change without notice.

rev 022408

www.cooperlighting.com

RSA Lighting • 7945 Orion Ave. • Van Nuys, CA 91406 • 818-349-3030 • FAX 818-349-3031

 

Loading...